• Journal of Radiation Protection and Research
• /
• v.28 no.3
• /
• pp.239-245
• /
• 2003

Every nuclear power plant measured concentrations of tritium in groundwater and surface water around the plants periodically. It was not easy to predict the tritium concentration only with these measurement data in case of various release scenarios. KAERI developed a new approach to find the relationship between the tritium release rate and tritium concentration in the environment. The approach was based upon a dynamic compartment model. In this paper the dynamic compartment model was modified to predict the tritium behavior more accurately. The mechanisms considered for the transfer of tritium between the compartments were evaporation, groundwater flow, infiltration, runoff, and hydrodynamic dispersion. Time dependent source terms of the compartment model were introduced to refine the release scenarios. Also, transfer coefficients between the compartments were obtained using realistic geographical data. In order to illustrate the model various release scenarios were developed, and the change of tritium concentration in groundwater and surface water around the nuclear power plants was estimated.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.3
• /
• pp.267-277
• /
• 1997

In this paper, heat conduction characteristics of the cylinder block of a small 3 - cylinder, 4¬stroke gasoline engine were analyzed using the 3 - dimensional finite element method. Based on the experimental data, the engine cycle simulation was carried out in order to obtain the heat transfer coefficient and the temperature of the gas and the mean heat transfer coefficient of the coolant. Heat transfer data of the gas, which were averaged with respect to exposure time to the wall, were taken as convective boundary conditions corresponding to the operating conditions to obtain the temperature fields of the block. Finally silicon nitride(Si3N4) was taken as the material of the block liner in order to investigate its temperature distribution characteristics and compare the results with the original ones.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.2
• /
• pp.366-375
• /
• 2016

The purpose of this research is to describe the experiences of transfer students in nursing colleges. This study was based on the qualitative content analysis. To collect qualitative data, 10 personal interviews were conducted from June 2013 to September 2014. Five sub-themes emerged from the data as follows: Participants started new challenge with self-confidence; Nursing science was difficult and unfamiliar disciplines to them; Firstly, they had no place in nursing department, but got places of their own over time; They managed to hold their own in confronting with difficulties; They consequently made personal upgrades in their life. The results of this study could guide nursing faculties to understand what kind of burdens transfer students experienced, how they had adapted to them, and how to support them to realize their full potential to grow into competent nurses.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.959-961
• /
• 2003

In this paper, we describe implemented DMAC (Direct Memory Access Controller) architecture on Altera's $Excalibur^{TM}$ that includes industry-standard $ARM922T^{TM}$ 32-bit RISC processor core operating at 200 MHz. We implemented DMAC based on AMBA (Advanced Micro-controller Bus Architecture) AHB (Advanced Micro-performance Bus) interface. Implemented DMAC has 8-channel and can extend supportable channel count according to user application. We used round-robin method for priority selection. Implemented DMAC supports data transfer between Memory-to-Memory, Memory-to-Peripheral and Peripheral-to-Memory. The max transfer count is 1024 per a time and it can support byte, half-word and word transfer according to AHB protocol (HSIZE signals). We implemented with VHDL and functional verification using $ModelSim^{TM}$. Then, we synthesized using $LeonardoSpectrum^{TM}$ with Altera $Excalibur^{TM}$ library. We did FPGA P&R and targeting using $Quartus^{TM}$. We can use implemented DMAC module at any system that needs high speed and broad bandwidth data transfers.

• Journal of IKEEE
• /
• v.26 no.4
• /
• pp.639-646
• /
• 2022

In this paper, to solve the large dataset problem, we collect images through an image collection method called web crawling and build datasets for use in image classification models through a data preprocessing process. We also propose a lightweight model that can automatically classify images by adding category values by incorporating transfer learning into the image classification model and an image classification model that reduces training time and achieves high accuracy.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.6
• /
• pp.378-386
• /
• 2017

Accurate distance measurement between maneuver target in underwater and measuring devices is required to perform quantitative test evaluation in marine weapons system R&D process. In general, the target distance is measured using a one-way ToA (Time of Arrival) method that calculates the time difference between transmitted and received signals from the two accurately synchronized devices. However, the distance estimation performance is degraded because of the multi-path environments. In this paper, the time-variant transfer function of complex underwater environment is estimated from each received data frame using RBD (Ray-based Blind Deconvolution), and the estimated time-variant transfer function is then used to get rid of the effect about complex underwater environment and to recover the data signal using PTRM (Passive Time Reversal Mirror). The result from the simulation and experimental data show that the suggested method improve the distance estimation performance when comparing with the conventional ToA method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.5
• /
• pp.739-746
• /
• 2002

In this paper, a new visual telephone system which has a differential task interrupt transfer feature for real time video phone service is presented. Owing to the result of Interrupt transfer of different speed according to the time critical degree of tasks, the flow of audio and video data stream can be kept as constant speed in other word that means video phone services are carried out in real time. The ITU-T H.32x visual telephone recommendations are first analyzed, and the unsatisfactory items of existing systems are second inquired the cause, such as performance, quality. And then the design concept and ideas which enable it to solve them are third devised, the next, the new architecture of visual telephone system for real time video phone source are designed, which make it possible to solve the existing problems by means of different tasks interrupt transfer method.

• The Korean Journal of Applied Statistics
• /
• v.27 no.3
• /
• pp.419-430
• /
• 2014

An accurate prediction of electricity supply and demand is important for daily life, industrial activities, and national management. In this paper electricity sales is predicted by time series modelling. Real data analysis shows the transfer function model with cooling and heating days as an input time series and a pulse function as an intervention variable outperforms other time series models for the root mean square error and the mean absolute percentage error.

• KIISE Transactions on Computing Practices
• /
• v.21 no.2
• /
• pp.109-114
• /
• 2015

This paper presents a computational model on the transfer of airborne fine particles to analyze the similarities and influences among the 25 districts in Seoul by quantifying a time series data collected from each district. The properties of each district are driven with the model of a time series of the fine particle concentrations, and the calculation of edge-based weights are carried out with the transfer entropies between all pairs of the districts. We applied a modularity-based graph clustering technique to detect the communities among the 25 districts. The result indicates the discovered clusters correspond to a high transfer-entropy group among the communities with geographical adjacency or high in-between traffic volumes. We believe that this approach can be further extended to the discovery of significant flows of other indicators causing environmental pollution.

• Clinical and Experimental Reproductive Medicine
• /
• v.45 no.1
• /
• pp.52-55
• /
• 2018

This study retrospectively assessed whether time-lapse data relating to developmental timing and morphology were associated with clinical outcomes, with the eventual goal of using morphokinetic variables to select embryos prospectively for cryopreservation. In this study, we examined the clinical outcomes of single vitrified-warmed blastocyst transfer cycles that were cultured in a time-lapse incubation system. The morphokinetic variables included uneven pronuclei, an uneven blastomere, multinucleation, and direct, rapid, and irregular division. A total of 164 single vitrified-warmed blastocyst transfer cycles were analyzed (102 cycles of regularly developed blastocysts and 62 cycles of blastocysts with morphokinetic variables). No significant differences in the age of females or the standard blastocyst morphology were found between these two groups. The regularly developed blastocysts showed significantly higher implantation and clinical pregnancy rates than the blastocysts exhibiting morphokinetic variables (30.4% vs. 9.7% and 37.3% vs. 14.5%, respectively; p< 0.01). The blastocysts that exhibited morphokinetic variables showed different mean development times compared with the regularly developed blastocysts. Although morphokinetic variables are known to have fatal impacts on embryonic development, a considerable number of embryos developed to the blastocyst stage. Morphokinetic variables had negative effects on the implantation and clinical pregnancy rates in vitrified-warmed blastocyst transfer cycles. These findings suggest that blastocysts cultured in a time-lapse incubation system should be considered for selective cryopreservation according to morphokinetic variables.