• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.67-73
• /
• 2017

An aircraft maintenance hangar is a building that stores, maintains, and inspects expensive aircraft. The frequency of fire occurrence is low, but the resulting human and material damage can be very serious. Therefore, in this study, we conducted a qualitative analysis of the fire safety of the currently operating fire suppression systems for aircraft maintenance hangars using the Fault Tree method, and then performed a quantitative analysis using the failure rate data for the derived basic events and analyzed the importance of the minimal cut sets. As a result of the qualitative analysis by the minimal cut set, it was found that there were 14 accident paths that could be expanded to a large fire, due to the fire control failure of the aircraft hangar fire suppression system. The quantitative analysis revealed that, the probability of the fire expanding into a large one is $2.08{\times}E-05/day$. The analysis of the importance of the minimal cut set shows that four minimal cut sets, namely the fire detector and foam head action according to the zone and blocking of the foam by the aircraft wing and the fire plume, had the same likelihood of causing the fire to develop into a large one, viz. 24.95% each, which together forms the majority of the likelihood. It was confirmed for the first time by fault tree method that the fire suppression system of aircraft maintenance hangars is not suitable for fires under the aircraft wings and needs to be improved.

• Journal of Preventive Medicine and Public Health
• /
• v.40 no.6
• /
• pp.505-511
• /
• 2007

Objectives : While cervical cancer is one of the leading cancers among women worldwide, there are a number of effective early detection tests available. However, the participation rates in cervical cancer screening among Korean women remain low. After the nationwide efforts in 1988 and thereafter to encourage participation in cervical cancer screening, few studies have investigated the effects of socioeconomic inequality on participation in cervical cancer screening. The purpose of this study was to investigate 1) the level of socioeconomic disparities in receiving cervical cancer screening by age group and 2) if there was an improvement in reducing these disparities between 1995 and 2001. Methods : Using data from the Korean National Health Status, Health Behavior and Belief Survey in 1995, the Korean National Health and Nutrition Examination Surveys from 1998 and 2001 (sample sizes of 2,297, 3,738, and 3,283), age-standardized participation rates were calculated according to education level, equivalized household income, and job status. Odds ratios and the relative inequality index (RII) were also calculated after controlling for age. Results : Women with lower education levels were less likely to attend the screening test, and the disparities by education level were most pronounced among women aged 60 years and older. The RIIs among women 60 years and older were 3.64, 4.46, and 8.64 in 1995, 1998, and 2001, respectively. Higher rates of participation were reported among those in the highest income category, which was more notable among the middle aged women (40s and 50s). An inconsistent trend in the rate of participation in cervical cancer screening by occupational level was found. Conclusions : Indicators of socioeconomic position seem to have varying impacts on the inequalities in the rates of participation in cervical cancer screening according to age group. These results demonstrate the need for more aggressive and age-based interventions and policy programs to eliminate the remaining inequalities.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.107-118
• /
• 2003

Highway Capacity Manual (HCM) provides an analytical delay estimation model to assist the evaluation of traffic at a signalized intersection. The model revised and included in the HCM published in the year 2000 reflects the results of recent studies and is utilized in various fields of transportation studies. For the implementation of the model in the case of permitted left turns, the HCM supplement provides a computational procedure to adjust the saturation flow rate of permitted left toms. The model however, is originally designed for a protected movement and thus underestimates the delay of permitted left turns due to its difference right-of-way nature. This document describes (1) a review of the theoretical background of the HCM delay estimation model, (2) problems embedded in the model for the delay estimation of permitted left turns, (3) a proposed model developed in this study to improve the delay estimation for permitted left turns and (4) a set of verification tests. In order to reflect various traffic and control conditions in the test, simulation studies were performed to by using the field data based on 120 different permitted left-turn scenarios. Comparison studies conducted between sets of delays estimated by the HCM and the proposed models against a set of the CORSIM delays and showed that the proposed model improved the estimation of the permitted left-turn delays. The explanatory variable of the relationship between the HCM delay and the simulation delay was 0.47 and the one between the delay estimated by the proposed model and the simulation delay was 0.77.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.76-83
• /
• 1998

The most remarkable aspect in the hormesis law is that dose of harmful agents can produce effect that are diametrically opposite to the effect found with high doses of the same agent. Minute quantities of a harmful agent bring about very small change in the organism and control mechanisms appear to subjugate normal processes to place the organism in a state of albert and repair. The stimulated organism in more responsive to changes in environmental factors than it did before being alerted. Routine functions, including repair and defense, have priority for available energy and matetial. The alerted organism utilizes nutrients more efficiently, grows faster, shows improved defense, and lives longer. Accelerated germination, sprouting, growth, development, blooming and ripening, and increased crop yield and resistance to disease are found in plants. Another concept supported by the data in that low doses of ionizing radiation provide increased resistance to subsequent high doses of radiation. The hormesis varies with subject plant, variety, state of seed, environmental and cultural conditions, physiologic function measured, dose rate and total exposure. The results of hormesis are less consistently found, probably due to the great number of uncontrolled variables in the experiments. The general dosage for radiation homlesis in about 100 (10 to 1,000) times ambient or 100 (10 to 1,000) times less than a definitely harmful dose, but these must be modified to the occasion. Although little is known about most mechanisms of homzesis reaction, overcompensation of repair mechanism is offered as one mechanism.

• Korean Journal of Digital Imaging in Medicine
• /
• v.16 no.2
• /
• pp.15-24
• /
• 2014

Currently commercially available phantom can reproduce and evaluate only a static situation, the study is incomplete research on phantom and system which is can confirmed functional situation in the kidney by time through dynamic phantom and blood flow velocity, various difference according to the amount of radioactive. Therefore, through this study, it has produced the dynamic kidney phantom to reproduce images through the dynamic flow of the kidney, it desires to evaluate the usefulness of nuclear medicine imaging. The production of the kidney phantom was fabricated based on the normal adult kidney, in order to reproduce the dynamic situation based on the fabricated kidney phantom, in this study it was applied the volume pump that can adjust the speed of blood flow, so it can be integrated continuously radioactive isotopes in the kidney by using 99mTc-pertechnate. Used the radioactive isotope was supplied through the two pump. It was confirmed the changes according to the infusion rate, radioactive isotopes and the different injection speeds on the left and right, analysis of the acquired images was done by drawn five times ROI in order to check the reproducibility of each on the front and rear of the kidney and bladder. Depending on the speed of injection, radioisotope was a lot of integrated and emissions up when adjusting the pressure of the pump as 30 stroke, it was the least integrated and emissions up when adjusting as 40 stroke. The integration of the left & right kidney was not reached in the amount of the highest when adjusting as 10 stroke. In the changes according to the amount of the radioactive isotope, 0.6 mCi(22.2 MBq), 0.8 mCi (29.6 MBq)was showed up similar tendency but, in the result of the injection 0.8 mCi, it was showed up counts close to double of 0.6 mCi. In the result of the differently injection speed of the left & right kidney, as a result of different conditions that injection speed was 20 stroke through left kidney phantom, the injection speed was 30 stroke through right kidney phantom, it was enough difference in the resulting image can be easily distinguished with the naked eye. Through this study, the results showed that the dynamic kidney phantom system is able to similarly reproduce renogram in the actual clinical. Especially, the depicted over time for the flow to be excreted through the kidney into the bladder was adequately reproduce, it is expected to be utilized as basic data to check the quality of the dynamic images. In addition, it is considered to help in the field of functional imaging and quality control.

• Journal of Sensor Science and Technology
• /
• v.7 no.2
• /
• pp.124-130
• /
• 1998

High-speed 3D vision systems are essential for autonomous robot or vehicle control applications. In our study, a stereo vision process has been developed. It consists of three steps : extraction of edges in right and left images, matching corresponding edges and calculation of the 3D map. This process is implemented in a VME 150/40 Imaging Technology vision system. It is a modular system composed by a display, an acquisition, a four Mbytes image frame memory, and three computational cards. Programmable accelerator computational modules are running at 40 MHz and are based on TMS320C31 DSP with a $64{\times}32$ bit instruction cache and two $1024{\times}32$ bit internal RAMs. Each is equipped with 512 Kbytes static RAM, 4 Mbytes image memory, 1 Mbytes flash EEPROM and a serial port. Data transfers and communications between modules are provided by three 8 bit global video bus, and three local configurable pipeline 8 bit video bus. The VME bus is dedicated to system management. Tasks between DSPs are distributed as follows: two DSPs are used to edges detection, one for the right image and the other for the left one. The last processor computes the matching process and the 3D calculation. With $512{\times}512$ pixels images, this sensor generates dense 3D maps at a rate of about 1 Hz depending of the scene complexity. Results can surely be improved by using a special suited multiprocessors cards.

• Journal of Life Science
• /
• v.25 no.5
• /
• pp.539-547
• /
• 2015

This study aimed to investigate the protective effect of Semisulcospira libertina extract on liver injury induced by D-galactosamine in rats. After the administration of S. libertina extract, the local fat degeneration and infiltration of inflammatory cells in liver tissues were significantly decreased and peripheral hemorrhages around portal triads and central necrosis around central veins were found to be protective. The elevated levels of plasma ALT, AST, and LDH, the ALP activation lipid peroxidation, and the lipid contents of a damaged liver were recovered in experimental rats administrated with S. libertina extract, suggesting its role in blood enzyme activation and lipid content restoration within damaged rat liver tissues. Moreover, the expression rate of TNF-α, which accelerates inflammation and induces tissue damage and necrosis, was significantly decreased. In addition, the activities of antioxidant enzymes were more effectively upregulated compared to those of the control group induced hepatotoxicity. All data showed that S. libertina extract has a preventive role against liver damages, such as inflammation and tissue necrosis, as instigated with D-galactosamine by improving the activities of blood enzymes and antioxidant enzymes and modulating the expression of inflammation factor, suggest S. libertina extract is an effective medicinal resource for the restoration of hepatotoxicity.

• Korean Journal of Food Science and Technology
• /
• v.27 no.6
• /
• pp.1013-1016
• /
• 1995

The color stability of betacyanins and effects of antioxidants from Opuntia dillenii Haw were determined in the fruit juice at temperature up to $90^{\circ}C$. The absorption maxima of betacyanins occurred between 536 nm and 538 nm. When fruit juice was heated at $90^{\circ}C$ for various times, the red color gradually diminished and the absorption maxima slightly shifted toward uv region. The kinetic analysis of the data obtained indicated that the discoloration for betacyanins obeyed first order reaction pattern, when the thermal stability test was performed at $50{\sim}90^{\circ}C$. And the rate constant increased from $1.56{\times}10^{-3}/min\;to\;71.91{\times}10^{-3}/min$ with the half-life decreasing from 444.23 min to 9.64 min. The results also indicated that the thermal stability of pigment decreased with increasing temperature. The energy of activation was 10.94 kcal/mole for the pigment. N-propyl gallate, L-cysteine, and ascorbic acid were added to cactus fruit juice at concentrations of $0.01{\sim}0.3%$ at different temperatures. Npropyl gallate and L-cysteine had a little antioxidant effect on betacyanins stability at $50^{\circ}C\;and\;70^{\circ}C$, whereas ascorbic acid had a great antioxidant effect with the half-life value of 2 to 10 times to that of the control.

• Journal of Digital Convergence
• /
• v.11 no.3
• /
• pp.415-426
• /
• 2013

Smart work has recently introduced as a way to solve problems such as greenhouse gas emissions, low birth rate and aging as well as to improve productivity. Because of development of ICT infrastructure and the proliferation of smart devices, the mobile office has the most commonly used within types of smart work in Korea. But the adoption of the mobile office in small businesses is only half of that of large corporations. The security issue appears to be one of the biggest obstacles to the introduction of smart work in small businesses. Therefore, the purpose of this study is to analyze the information security factors that should be considered when the mobile office is introduced to small businesses. By analyzing the previous studies, the information security factors of the mobile office are classified 5 groups composed of 24 factors. 5 groups are terminals, applications and platforms, networks, servers and users. According to the survey result using AHP, 'User' was drawn to the most important group, and 'Data Encryption', 'Wireless LAN Control' and 'Terminal Recovery When Leaving' were drawn to the important information security factors of the mobile office among 24 factors.

• Plant Journal
• /
• v.11 no.1
• /
• pp.39-49
• /
• 2015

The objective of this study is to improve the classification structure of commodity code for piping material management which is considered as the fundamental of commodity code and piping material management system. It enhances the efficiency of piping material management directly or indirectly affecting the engineering, procurement and construction in a petrochemical plant projects. To establish an improved code classification structure, this study identifies the problems of former code classification structure in details, as well as the characteristics of other domestic and global EPC company's code classification structures and presents the improved direction considering the recently mega-sized and specialized projects. Accordingly, to efficiently enhance piping material management, the improved code classification structures have been derived from defining suitable code classification structure for specific piping component, adding more standard attribute, expanding the number of code digits and classifying code hierarchy. The results of applying the improved classification structure of commodity code to on-going project have led to reduce the rate of rework from 4.98% to 2.48% for developing purchase description and also have saved working time for executing piping design by 3D modeling from 6 months by two persons to 4 months by a person which is decreased 67% consequently. In addition, the structures of pyramid code management have resulted to accumulation and analysis of the various piping data for other disciplines such as procurement and estimation team which require commodity code information through the company's material control system.