• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.10a
• /
• pp.277-278
• /
• 2017

Recently, many industrial instruments face the problem of protocol compatibility with the external monitoring and control system. This paper implemented a protocol conversion algorithm for industrial monitoring about communication Data. This algorithm is supported programmable method by user. we experimented the protocol conversion by communication gateway module using implemented algorithm, and obtained good results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.9
• /
• pp.828-837
• /
• 1991

본 논문에서는 CCITT에서 채택된 X.2.5 network과 IBM이 채택한 System network architecture(SNA)의 synchronous data link control(SDLC)간의 protocol converter의 성능 분석을 한다. 여기서 protocol converter의 link level map-ping method를 사용하여 구현 되었다고 가정한다. 성능 분석을 통하여 각종 parameter에 대한 throughput과 mean waiting time을 구하며, 다양한 paramerter에 대하여 최적의 값을 조사한다. 특히 converter가 추정한 SDLC frame이 X.25. network packetizing과 규정한 최대 data packet size 보다 더 클 경우에 frame을 분할하게 되는데. 분할방식에 있어서 full and remainder packetzing과 equal packetizing 도입하여 서로간의 성능을 비교한다. message를 분할 할 때 조격으로 나누는 것이 frame의 오류를 줄일 수 있기 때문에 전자보다 후자가 성능면에서 우수함을 알 수 있다.

• Journal of Information Processing Systems
• /
• v.7 no.2
• /
• pp.241-260
• /
• 2011

In earlier days, most of the data carried on communication networks was textual data requiring limited bandwidth. With the rise of multimedia and network technologies, the bandwidth requirements of data have increased considerably. If a network link at any time is not able to meet the minimum bandwidth requirement of data, data transmission at that path becomes difficult, which leads to network congestion. This causes delay in data transmission and might also lead to packet drops in the network. The retransmission of these lost packets would aggravate the situation and jam the network. In this paper, we aim at providing a solution to the problem of network congestion in mobile ad hoc networks [1, 2] by designing a protocol that performs routing intelligently and minimizes the delay in data transmission. Our Objective is to move the traffic away from the shortest path obtained by a suitable shortest path calculation algorithm to a less congested path so as to minimize the number of packet drops during data transmission and to avoid unnecessary delay. For this we have proposed a protocol named as Congestion Aware Selection Of Path With Efficient Routing (CASPER). Here, a router runs the shortest path algorithm after pruning those links that violate a given set of constraints. The proposed protocol has been compared with two link state protocols namely, OSPF [3, 4] and OLSR [5, 6, 7, 8].The results achieved show that our protocol performs better in terms of network throughput and transmission delay in case of bulky data transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1343-1355
• /
• 1997

Full motion video data is the most effective data type that transmits information in multimedia enviornment. VOD service is system that uses network to transmit full motion video data interactively. Therefore VOD service system must satisfy the following requirements. First, it should transmit high quality full motion video. Second, it should be able to control a large quantity of full motion video. Third, a user should be able to retrieve the full motion vide effectively. However the existing VOD service system is established based n file system that not only does it have disadvantages in managment such as transaction control but also it is not suitable for distributed multimedia environment. The goal of this research is to build a VOD service system that provides high-quality full motion video assuming information retrieval. In order to mainly search video data's bibliographical information and to manage related information, VOD service system and DBMS system are to be closely related. Also, to transmit high quality full motion video data, we use MTP$^{TM}$(Media Transfer Protocol) developed by StarLight. MTP$^{TM}$ guarantees high bandwidth that is necessary to tansmit high quality full motion video data effectively. In other hand TCP/IP which is used for information search does not guarentee high bandwidth as that in MTP$^{TM}$. Therfore VOD service system that seraches information managed by DBMS and transmits requried full motion video data should control different kinds of protocol simultaneously. This paper describes the configuration of VODB system that has solved these problems, implementation and efficiency of data applied system.stem.

• The KIPS Transactions:PartC
• /
• v.14C no.5
• /
• pp.395-402
• /
• 2007

Wireless sensor networks have many sensor nodes which response sudden events in a sensor fields. Some efficient routing protocol is required in a sensor networks with mobile sink node. A data-path template is offered for the data announcement and data request from source node and sink node respectively. Sensed data are transferred from source node to sink node using short-distance calculation. Typical protocols for the wireless networks with mobile sink are TTDD(Two-Tier Data Dissemination) and CBPER(Cluster-Based Power-Efficient Routing). The porposed SPDR(Short-Path Data Routing) protocol in this paper shows more improved energy efficiencies from the result of simulations than the typical protocols.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.3
• /
• pp.249-256
• /
• 2017

Recently, application areas based on M2M (Machine-to-Machine communications) and IoT (Internet of Things) technologies are expanding rapidly. Accordingly, water flow and water quality management improvements are being pursued by applying this technology to water and sewage facilities. Especially, water management will collect and store accurate data based on various ICT technologies, and then will expand its service range to remote meter-reading service using smart metering system. For this, the error in flow rate data transmitting should be minimized to obtain credibility on related additional service system such as real time water flow rate analysis and billing. In this study, we have identified the structural problems in transmitting process and protocol to minimize errors in flow rate data transmission and its handling process which is essential to water supply pipeline management. The result confirmed that data acquisition via communication system is better than via analogue current values and pulse, and for communication method case, applying the industrial standard protocol is better for minimizing errors during data acquisition versus applying user assigned method.

• The KIPS Transactions:PartC
• /
• v.18C no.5
• /
• pp.303-316
• /
• 2011

Data aggregation is important in wireless sensor networks. However, it also introduces many security problems, one of which is that a compromised node may inject false data or drop a message during data aggregation. Most existing solutions rely on encryption, which however requires high computation and communication cost. But they can only detect the occurrence of an attack without finding the attacking node. This makes sensor nodes waste their energy in sending false data if attacks occur repeatedly. Even an existing work can identify the location of a false data injection attack but it has a limitation that at most 50% of total sensor nodes can participate in data transmission. Therefore, a novel approach is required such that it can identify an attacker and also increase the number of nodes which participate in data transmission. In this paper, we propose a monitoring-based secure data aggregation protocol to prevent against a compromised aggregator which injects false data or drops a message. The proposed protocol consists of aggregation tree construction and secure data aggregation. In secure data aggregation, we use integration of abnormal data detection with monitoring and a minimal cryptographic technique. The simulation results show the proposed protocol increases the number of participating nodes in data transmission to 95% of the total nodes. The proposed protocol also can identify the location of a compromised node which injects false data or drops a message. A communication overhead for tracing back a location of a compromised node is O(n) where n is the total number of nodes and the cost is the same or better than other existing solutions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.12
• /
• pp.5862-5887
• /
• 2019

In this paper, we propose a two-way relaying scheme using non-orthogonal multiple access (NOMA) technology. In this scheme, two sources transmit packets with each other under the assistance of the decode-and-forward (DF) relays, called as a TWDFNOMA protocol. The cooperative relays exploit successive interference cancellation (SIC) technique to decode sequentially the data packets from received summation signals, and then use the digital network coding (DNC) technique to encrypt received data from two sources. A max-min criterion of end-to-end signal-to-interference-plus-noise ratios (SINRs) is used to select a best relay in the proposed TWDFNOMA protocol. Outage probabilities are analyzed to achieve exact closed-form expressions and then, the system performance of the proposed TWDFNOMA protocol is evaluated by these probabilities. Simulation and analysis results discover that the system performance of the proposed TWDFNOMA protocol is improved when compared with a conventional three-timeslot two-way relaying scheme using DNC (denoted as a TWDNC protocol), a four-timeslot two-way relaying scheme without using DNC (denoted as a TWNDNC protocol) and a two-timeslot two-way relaying scheme with amplify-and-forward operations (denoted as a TWANC protocol). Particularly, the proposed TWDFNOMA protocol achieves best performances at two optimal locations of the best relay whereas the midpoint one is the optimal location of the TWDNC and TWNDNC protocols. Finally, the probability analyses are justified by executing Monte Carlo simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.391-398
• /
• 2011

In this paper, we propose a MAC protocol for visible light wireless LAN using LED light. The proposed MAC protocol has a function of automatic direction optimization for LED transceiver. There is periodical time slot for broadcasting and registration in the proposed MAC protocol. We used polling method for data transfer in the protocol since visible light is hard to detect carrier and collision by other mobile stations; thus we cannot use CSMA/CD method in visible light LAN. We also amended the MAC frame of IEEE 802.11 to propose a revised version for visible light wireless LAN using LED light. We investigate the performance of the proposed MAC protocol. When the bit rate of physical layer is 100 Mb/s, the net data throughput using the proposed MAC protocol is estimated to 94.386 Mb/s.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.351-359
• /
• 2010

In this paper, we propose a transmission algorithm of the TLI protocol of the IEC 61162-4 standard to perform the e-Navigation on ship, and we design and implement the TLI protocol according to the proposed algorithm. The implemented protocol is a TCP/IP based protocol, and is a network protocol with the MAU and LNA components proposed in the IEC 61162-4 standard. In addition, it makes a data transmission over the network architecture based on client/server network model. In the implemented protocol, there are a communication between the MAU and the LNA in one host, and also a communication between the LNA and the LNA in each other hosts. In order to provide a variety of service in a host, every client host has a LNA and multiple MAUs. According to the standard specification and the proposed transmission algorithm, we designed and implemented the TLI protocol using object-oriented mechanism. We carried out the experiment under a simple network model similar to real ship environment, and confirmed that it successfully transmits and receives data between the hosts.