• Journal of Advanced Navigation Technology
• /
• v.16 no.1
• /
• pp.96-102
• /
• 2012

The goal of mobile internet system is to provide a high-data-rate, low-latency and optimized packet radio access technology supporting flexible bandwidth deployments. Therefore, network architecture is designed with the goal to support packet-switched traffic with seamless mobility, quality of service and minimal latency. An important requirement for the mobile internet system is improved cell-edge BER performance and data throughput. This is to provide some level of service consistency in terms of geographical coverage as well as in terms of available data throughput within the communication coverage area. In a cellular system, however, the signal to interference plus noise power ratio gap between cell-center and cell-edge users can be of the order of 20 [dB]. The disparity can be even higher in a communication coverage limited cellular system. This leads to vastly lower data throughputs for the cell-edge users relative to cell-center users creating a large QoS gap. This paper proposes a analytical approach that tries to reduce inter-cell interference, and shows the SIR and BER performance according to the OFDM system parameters in mobile Internet environment.

• Journal of Soil and Groundwater Environment
• /
• v.28 no.2
• /
• pp.12-29
• /
• 2023

Conceptual site model (CSM) development and enhancement for contaminated sites assists in identifying data gaps during the site investigation process. In this study, CSM was developed and enhanced for a contaminated site in Korea as a case study. Site Y was scrutinized four times previously. The site profiles for each scrutiny were reorganized based on the scrutiny reports, and the relevant data was utilized to develop and enhance CSMs. CSM for the first investigation was developed in various forms including table, flowchart, diagram, and narrative formats. CSM was enhanced in a stepwise manner by incorporating the updated profile information obtained in next investigation to existing CSM. The hypothetical data gap analysis between each investigation step was established to meet the purpose of the follow-up investigation. This case study showed that CSM is a useful tool to identify the history and current status of contaminated sites and thereby help in planning supplementary investigations for better site characterization.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.2 no.2
• /
• pp.39-45
• /
• 2019

The purpose of this study is to solve the problem of revision or abbreviation of questionnaires based on the previous studies suggested by many existing empirical studies. In addition, this study aims to provide the theoretical basis of the research method which has been variously approached since it presents the methodology that can directly measure the research object. For this purpose, this study proposed a more elaborate analysis method using the differences in perception of individuals who are interested in cognitive research. Specifically, the perception gap(D) can be used as an independent variable, a dependent variable, and a moderating variable. And this study suggested an effective research approach using the measurement of perception difference. The difference of perception suggested that it can be used as a measure to overcome the limitations of existing researches used it as independent variables or mediating variables that measure only one factor of expectation and performance or importance and satisfaction. In addition, it is highly likely that various analyzes on the perception differences, which are the result of measuring target factors for the same person, will be quite effective in the situation where follow-up of respondents is difficult. This study is expected to overcome various limitations reported by empirical studies such as scale utilization problem and follow-up survey difficulty. In future research, it was expected that the limitation of the factor derivation process in the research approach could be complemented by web crawling and text mining of big data analysis.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.1
• /
• pp.77-83
• /
• 2012

Objective: The aim of this paper is to introduce a method that can measure and analyze the judgment gaps between service providers and customers. Background: It is important to understand the good service that service providers and customers are thinking. If there is judgment gap between service providers and customers, it would cause an unsatisfactory service. The judgment gap should be thoroughly investigated for a good service design. Method: Lens model is a human decision making model that was proposed by Brunswick(1952). This study indicates whether the Lens model can be applied to analyze judgment gaps between service providers and customers. As a case study, a library lending service was selected. 5 librarians and 15 customers participated in the experiment that investigates their judgments on a good service. The obtained data were analyzed by a modified lens model. Results: Cue weighting policies of consumers and service providers were similar, except that consumers gave higher weight on tangibility than service providers. Service providers and consumers had a good knowledge on the service quality, but they could not well apply the knowledge to judge it. Conclusion: The lens model may be used to analyze judgment gaps between service providers and consumers in the other service areas. The decision cues that were used in this study can be changed, depending on the characteristics of the target service. Application: The method that is proposed in this study may help to investigate and analyze both consumers' and service providers' judgments on a variety of services.

• Journal of Labour Economics
• /
• v.42 no.3
• /
• pp.1-38
• /
• 2019

This paper investigates the relationship between the occupational gender wage gap and the proportion of high wage earning female workers in Korea. The main idea is that an increase in the number of high wage earning female workers in the workplace could lead to a decrease in the gender wage gap by eradicating the prejudice or reducing the statistical discrimination on female workers. We constructed a panel dataset by using the raw data from the Korean Survey Report on Labor Conditions by Employment between 2009 and 2016. The result shows that greater presences of high wage earning female workers in male dominant occupations have statistically significant negative impacts on residual gender earning dispersion.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.41 no.3
• /
• pp.59-74
• /
• 2016

Electricity sales are directly measured from individual consumers, which could minimize the time gap between data collection and public announcement. Furthermore, industrial electricity sales are highly linked with production and output. Therefore, industrial electricity consumption can be used to track production and output in real time. By using the high-frequency data of industrial electricity sales, this study develops the daily electricity business index (DEBI) to capture the daily economic status. The steps used to formulate DEBI are as follows: (1)selection of the explanatory variables and period, (2) amendment of the seasonal adjustment to eliminate daily temperature and effective day effects, (3) estimation of the weighted value via variables by using PCA, (4) calculation of DEBI and commencement of validation tests. Our empirical analysis and the Hodrick-Prescott filter analysis show that DEBI is highly related to existing economic indices.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.49-51
• /
• 1996

The z-transform method is a basic mathematical tool in analyzing and designing sampled-data control systems. However, since the z-transform method relates only the sampling-instants signals, another mathematical tool is necessary to describe the continous signals between the sampling instants. For this purpose the delayed and the modi fled z-transform methods were developed. The definition of the modi fled z-transform includes a sample in the interval [-T,0] of the original signal in its series expression, where the signal value is always zero for any physical system. From this reason one step skew of the time index always appears in its application formulas. This introduces an unnecessary operation and a gap in linking the mathematical formula and its physical interpretation. Considering the conceptual difficulty and application inconvenience, a method of using the advanced z-transform in analysis of sampled-data control systems is developed as a replacement of the modi fled z-transform. With one formulation of the advanced z-transform, now it is possible to relate both the signals of the sampling instants and those in between without any complication and conceptual difficulty.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.8
• /
• pp.957-968
• /
• 1999

Performance tests of an airfoil fan and measurement of flow fields at the impeller exit are carried out to investigate the effects of the tip clearance between the rotor and inlet casing on the impeller performance. The impeller is twelve bladed of NACA 65-810 airfoils and tested with 3 different size of gap; 1, 2, 4mm. The relative decrease of pressure rising performance of the fan is 15 percent for the design flow rate when the gap size is 1 percent of the impeller diameter. The reduction of performance becomes large as the flow rate increases. The leakage flow through the clearance affects the through flow of the impeller, which results in decrease of the slip factor as well as the impeller efficiency. The data base obtained in the present study can be used for the design and flow analysis of the airfoil fans.

• Journal of Korean Academy of Nursing Administration
• /
• v.12 no.2
• /
• pp.204-212
• /
• 2006

Purpose: The aim of this study was to analyze the gap between the nurse's expectation and perception of internal marketing activities. Methods: The participants of this study were 521 nurses working in four general hospitals. The data were collected by self-reporting questionnaires. They were analyzed using descriptive statistics and paired-t test. Results: First, the mean of the nurse's expectation of internal marketing activities was 3.83, and perception was 2.54, showing a significant difference. Second, in all of the five subcategories of internal marketing activities, there were also statistically significant differences. Regarding the vacation system, the expectation score was highest, and support of academic education programs in education and training, payed-leaves during vacation, discounting of medical fees in employee welfare, distress management and two-way intercommunication, and allowances in reward were followed. Conclusion: These results will be used to develop focused internal marketing strategies to enhance the nurses' motivation.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1650-1657
• /
• 2019

Fluidelastic instability and nonlinear dynamics of tube bundles is a key issue in a steam generator. Especially, once the post-instability motion of the tube becomes larger than the clearance gap to other tubes, effective contact or impact between the tubes under consideration and the other tube inevitable. There is seldom theoretical analysis to the nonlinear dynamic characteristics of a tube array in two-phase flow. In this paper, experimental and numerical studies were utilized to obtain the critical velocity of the flow-induced instability of a rotated triangular tube array. The calculation results agreed well with the experimental data. To explore the post-instability dynamics of the tube array system, a Runge-Kutta scheme was used to solve the nonlinear governing equations of tube motion. The numerical results indicated that, when the flow pitch velocity is larger than the critical velocity, the tube array system is undergoing a limit cycle motion, and the dynamic characteristics of the tube array are almost similar for different void fractions.