• 한국측량학회지
• /
• 제4권2호
• /
• pp.59-75
• /
• 1986

본 연구는 LANDSAT MSS Data를 연안해역의 수리현상파악을 목적으로 이용하는 경우의 가장 효과적인 화상해석방법을 모색한 것이다. 우리나라 인천지역을 대상으로, 육역에 비하여 CCT Data값이 낮은 해역의 LANDSAT MSS Data를 사용하여 화상강조의 기법인 Contrast 강조처리, Color 합성처리 및 비연산처리 등 화상처리를 실행함으로써, 연안해수역의 유동특성을 파악하기 위한 가장 효과적인 LANDSAT MSS Data의 화상해석순서를 제안하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.296-298
• /
• 2008

Currently SCADA System faces various fault situation. Operator must recognize all fault state and management plans. But it is not easy to recognize all category and acquired error data. So it is needed that automatic fault estimation. Automatic fault estimation is possible to data flow control. Data flow control method is two type. One is alarm processing and the other one is topology processing. This paper provide two type processing method in SCADA data flow control.

• 한국CDE학회논문집
• /
• 제2권1호
• /
• pp.11-18
• /
• 1997

Scientific volume visualization addresses the representation, manipulation, and rendering of volumetric data sets, providing mechanisms for looking closely into structures and understanding their complexity and dynamics. In the past several years, a tremendous amount of research and development has been directed toward algorithms and data modeling methods for a scientific data visualization. But there has been very little work on developing a mathematical volume model that feeds this visualization. Especially, in flow visualization, the volume model has long been required as a guidance to display the very large amounts of data resulting from numerical simulations. In this paper, we focus on the mathematical representation of volumetric data sets and the method of extracting meaningful information from the derived volume model. For this purpose, a B-spline volume is extended to a high dimensional trivariate model which is called as a flow visualization model in this paper. Two three-dimensional examples are presented to demonstrate the capabilities of this model.

• 대한전기학회논문지
• /
• 제34권8호
• /
• pp.301-307
• /
• 1985

The first four generations of computers are all based on a single basic design: the Von Neuman Processor, which is sequential and does one operation at a time. Efforts to develop concurrent or parallel computers have been carried on for many years. Data flow approach is significant in these efforts to make high speed parallel machines and expected a great deal of parallelism. In this paper we propose a preliminary data Flow Machine Model operating asynchronously on the base of Node Labelling. We introduce a concept of Node Labeling for this purpose which is relevant to the Data dependency and Parallelism. And we explain how the Node Tokens are fired in the proposed system.

• 상하수도학회지
• /
• 제17권4호
• /
• pp.495-502
• /
• 2003

In order to modify incorrect flow data in the sewage system, the method using the stage-discharge relation and hydraulic characteristic curve of sewer pipe are applied. The modified data were verified with field measured data and the infiltration analysis using the modified data was carried out. When flowrate were measured using the flow-meter in fair weather, the stage data were comparatively consistent but velocity data were very poor for the most part. Therefore, it was recommended that sewage flowrate variation characteristic curve and infiltration were computed using the modified data on the basis of stage data. Especially, in the case of using the hydraulic characteristic curve, extrapolation results of the rainy season flowrate using regression curve on the basis of the data in fair weather were also reasonable.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.136-141
• /
• 2000

A study of counter-current two-phase flow in narrow rectangular channels has been performed. Two-phase flow regimes were experimentally studied in 760 mm long and 100 mm wide test sections with 2.0 and 3.0mm gaps. The resulting data have been compared to previous transition models. For the transition from bubbly to slug flow the superficial velocity of gas increased as the gap width increased. The comparison of experimental data to the transition model developed by Taitel and Barnea showed relatively good agreement for the bubbly-to-slug transition in the case of 2mm gap width. For the criteria of Mishima and Ishii to be applicable to the slug-to-churn transition the distribution parameter should be well defined for narrow channels. Even though the gap width of narrow channels increased the superficial gas velocity did not change for the transition form chum to annular flow regime. For the chum-to-annular transition the model of Taitel and Barnea showed discrepancies with experimental data, especially in the channel with larger gap.

• Bulletin of the Korean Chemical Society
• /
• 제5권2호
• /
• pp.73-78
• /
• 1984

Superplastic alloys generally exhibit a three-stage sigmoidal variation of stress (f) with strain rate (s), the stages being named region 1, 2 and 3 according to the increasing order of stress or strain rate. In the recent years, two different types of papers have been published on the plastic deformation of Zn-22% Al eutectoid in region Ⅰ differing in strain-rate sensitivity m (= dln f/dln s). In this paper, the data of the two groups have been analysed by applying Kim and Ree's theory of superplastic deformation. (1) We obtained the parametric values of $X_{gj}/{\alpha}_{gj}\;and\;{\beta)_{gj}$ (g: grain boundary, j = 1,2 indicating flow units) appearing in Kim and Ree's theory [Eq. (2a)]. (2) It was found that the value of $X_{g^2}/{\alpha}_{g^2}$ is small for the group data with small m, i.e., ${\alpha}_{g^2}$, which is proportional to the size of flow unit g2, is large whereas ${\alpha}_{g^2}$ is small for the groups data with large m, i.e., the size of the flow unit g2 is small. In other words, the two types of behavior occur by the size difference in the flow units. (3) From the ${\beta}_{gj}$ value, which is proportional to the relaxation time of flow unit gj, the ${\Delta}H_{gj}^{\neq}$ for the flow process was calculated, and found that ${\Delta}H_{g^2}^{\neq}$ is large for the group data with small m whereas it is small for the group data with large m. (4) The flow-unit growth was studied, but it was concluded that this effect is not so important for differentiating the two groups. (5) The difference in ${\alpha}_{g^2}$ and in the growth rate of flow units is caused by minute impurities, crystal faults, etc., introduced in the sample preparation.

• 한국항공우주학회지
• /
• 제47권12호
• /
• pp.831-840
• /
• 2019

플러시 대기자료 측정장치는 비행체 표면에서 측정되는 압력 데이터를 이용하여 대기자료를 예측한다. FADS는 돌출된 프로브가 없으므로 고성능 항공기, 스텔스 비행체 및 극초음속 비행체에 적합하다. 본 논문에서는 구-원추 형상을 갖는 비행체에 대해서 아음속부터 초음속 비행까지 대기자료를 예측할 수 있는 FADS의 교정 절차와 계산 알고리즘을 제시한다. 표면 압력 데이터 측정을 위해 노즈부 표면에 5개 플러시 압력공들을 마련하였다. 유동각 예측과 압력 관련 변수의 예측을 분리하는 개념이며, 아음속 유동의 포텐셜 유동해와 극초음속 유동의 수정 뉴톤식을 결합한 압력모델을 사용한다. 교정 압력 데이터는 Euler 방정식을 푸는 전산유체역학 코드를 만들어서 마흐수 0.5 ~ 3.0의 범위에서 구축하였다. 비행 마흐 수 0.6~3.0, 받음각과 옆미끄럼각은 각각 -10° ~ +10°의 범위에서 여러 비행조건에 대해서 테스트를 수행하였다. 예측된 대기자료는 받음각, 옆미끄럼각, 마흐수, 자유류 정압이며 참고 데이터와 비교하여 정확도를 분석하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1998년도 유체기계 연구개발 발표회 논문집
• /
• pp.123-128
• /
• 1998

This study presents the measurement techniques on the periodic fluctuating flow such as the discharge flow of a centrifugal impeller in unstable operating region. During rotating stall, the flow at the exit of a centrifugal compressor impeller fluctuates periodically with lower frequency than that of the blade passing. To observe the blade-to-blade flow characteristics during rotating stall, the phases of all the sampled data sets should be adjusted to those of the reference signals with two processes, in these processes, DPLEAT (Double Phase-Locked Ensemble Averaging Technique) can be used. From these measurement and data processing techniques, the characteristics not only on the blade-to-blade flow with high frequency, but also on the periodic rotating stall flow with low frequency at the centrifugal impeller exit can be clearly observed.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.110-115
• /
• 2000

The mean streamline analysis using the empirical loss correlations has been developed for performance prediction of industrial mixed-flow fan impellers in the present study. New simple, but effective, models for the additional Euler input work characteristic and an internal recirculation loss due to internal flow reversal under the low flowrate conditions are proposed in this paper. Comparison of overall performance predictions with six sets of test data of mixed-flow fans is accomplished to demonstrate the accuracy of the proposed models. Predicted performance curves by the present set of loss models agree fairly well with experimental data for a variety of mixed-flow fan impellers over the entire operating conditions. The prediction method presented herein can be used efficiently in the conceptual design phase of mixed-flow fan impellers.