• 제목/요약/키워드: Data collector

검색결과 192건 처리시간 0.02초

국내 최대 경사면일사량 분석 (Analysis of Maximum Solar Radiation on Inclined Surfaces in Korea)

  • 조덕기;윤창열;김광득;강용혁
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
    • /
    • pp.3-7
    • /
    • 2009
  • The amount of incident rays over inclination according to direction has been widely utilized as important data in installing solar thermal systems. To optimize the incident solar radiation, the slope, that is the angle between the plane surface in question and the horizontal, and the solar azimuth angles are needed for these solar thermal systems. This is because the performance of the solar thermal systems in much affected by angle and direction of incident rays. Recognizing that factors mentioned above are of importance, actual experiment on the moving route of the sun have been performed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. After all, the standard for designing highly optimized solar thermal systems will be provided for designers and employees working in the solar collector related industries.

  • PDF

Synergy of monitoring and security

  • Casciati, Sara;Chen, Zhi Cong;Faravelli, Lucia;Vece, Michele
    • Smart Structures and Systems
    • /
    • 제17권5호
    • /
    • pp.743-751
    • /
    • 2016
  • An ongoing research project is devoted to the design and implementation of a satellite based asset tracking for supporting emergency management in crisis operations. Due to the emergency environment, one has to rely on a low power consumption wireless communication. Therefore, the communication hardware and software must be designed to match requirements, which can only be foreseen at the level of more or less likely scenarios. The latter aspect suggests a deep use of a simulator (instead of a real network of sensors) to cover extreme situations. The former power consumption remark suggests the use of a minimal computer (Raspberry Pi) as data collector.

Sensitive analysis of design factor for the optimum design of PVT system

  • Jeong, Yong-Dae;Nam, Yujin
    • KIEAE Journal
    • /
    • 제15권4호
    • /
    • pp.5-11
    • /
    • 2015
  • Purpose: Recently, renewable energy system has been widely used to reduce the energy consumption and CO2 emission of building. A photovoltaic/thermal(PVT) system is a kind of efficient energy uses, which is combined with photovoltaic module and solar thermal collector. PVT system removes heat from PV module by through thermal fluid to raise the performance efficiency of the PV system. However, though PVT system has the merit of the improved efficiency in theoretical approach, there have been few performance analysis for PVT system using the dynamic energy simulation. In this study, in order to establish the optimum design method of this system, simulation was conducted by using individual system modules. Method: For the dynamic simulation, TRNSYS17 was used and local weather data was utilized. Furthermore, the system performance in various installation condition was calculated by case studies. Result: As a result, the amount of electric generation and heat production in each case was found by the simulation. The gap of system performance was also evident according to the installation condition.

원심펌프의 회전차 출구 유동 특성 (Flow characteristics at the Impeller Exit of a Centrifugal Pump)

  • 홍순삼;강신형
    • 유체기계공업학회:학술대회논문집
    • /
    • 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
    • /
    • pp.36-44
    • /
    • 2000
  • The flow at the impeller exit is important to validate engineering design and numerical analysis of pumps. We installed axisymmetric collector instead of the volute casing, so there is no interaction between the impeller and casing. A hot-film probe and a high response pressure transducer are used to investigate the flow at impeller exit and vaneless diffuser region for design and off design flow rate. For a single suction centrifugal pump of low specific speed, the flow field such as velocity, flow angle, and total pressure are measured by traversing the probe across the vaneless diffuser. These data can be used for performance prediction, design, and numerical analysis of pumps.

  • PDF

예방정비의 필요성 (Not Preventive Maintenance, But Predictive Maintenance)

  • 전형식;글렌화이트
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1994년도 춘계학술대회논문집; 영남대학교, 20 May 1994
    • /
    • pp.109-115
    • /
    • 1994
  • 지난 날에는 생산공장 기기들의 정비에 진동분석 이용은 거의 전무한 상태이었으며 과학이 발달된 이 즈음에도 고장이 날 때까지 기기를 혹사하고 고장이 난 후에야 많은 시간과 경비를 들여 기기를 재가동 함은 물론 공장가동 중단으로 인한 생산성 상실이 산업계에 주는 영향은 크다. 경우에 따라서는 기기전체를 교체하는 큰 대형사고로 이어질 수 있기 때문에 공장 전면 조업에 큰 차질을 빚게된다. 시태크(Time tech)와 Re-Engineering과 같은 최첨단 경영방침에 부응하기 위해서는 구태의연한 가동파괴정비나 정기점검 정비방법을 탈피하여 최신 진동분석 기술을 이용한 예방정비(predictive maintenance)를 채택하는 것이 바람직하다. 과학기술 발전에 힘입어 정확한 진동자료를 수집할 수 잇는 주파수분석기(FFT analyzer)나 자료수집기 (data collector)와 진동자료를 심층분석하여 정확한 진동해결방안을 제시할 수 있는 software가 개발되어 사용화 되어 있는바 관계기술 요원들의 진동에 대한 이해와 기술습득으로 한차원 높은 기기정비를 통해 효율적인 생산성증가, 정비비용감소, 안전사고 미연방지등 많은 것을 함께 얻을 수 있다.

  • PDF

Instability of Electrically Driven Polymer Liquid Jets

  • Lee Min-Hyung;Kang Seung-Baik;Park Joo-Hyuk
    • Journal of Mechanical Science and Technology
    • /
    • 제20권3호
    • /
    • pp.409-417
    • /
    • 2006
  • Polymer nanofibers can be generated by a electrospinning process. The process involves electrically charged jet of polymer solutions evolving from a droplet. The jet stretches in vertical direction due to the difference between charged particle and constant current located at the collector, while the Coulomb and viscoelastic forces start to contribute to radial and azimuthal (torsional) stretching. In this paper, the unstable dynamics of the liquid polymer jet is examined experimentally and theoretically. A complex viscoelastic rheological model has been adopted to analyze the behavior of a charged liquid jet. The model includes complex phenomena of stress relaxation of the liquid jet resulting from the competing force components. The experimental data of the jet paths captured by high-speed videocamera also confirm the similar behavior with the predictions.

태양열시스템 설치를 위한 방위별 경사면일사량 분석 (Analysis of Solar Radiation on Inclined Surfaces with various Directions for the Installation of Solar Thermal Systems)

  • 조덕기;강용혁
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2008년도 추계학술대회 논문집
    • /
    • pp.171-173
    • /
    • 2008
  • The amount of incident solar rays on inclined surfaces with various directions has been widely utilized as important data in installing solar collector, hot water system, and designing solar buildings and house. This is because the performance of the solar energy applied systems is much affected by angle and direction of incident rays. Recognizing those factors mentioned above are of importance, actual experiment has been performed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. The results obtained in this research could be used in designing optimal solar thermal systems.

  • PDF

국내 태양열시스템 설치를 위한 시스템 최적 설치각 산출을 통한 최대 경사면일사량 분석 (Analysis of Maximum Solar Radiation on Inclined Surfaces for the Installation of Solar Thermal Systems in Korea Using the Optimum Installation Angle)

  • 조덕기;강용혁
    • 한국태양에너지학회 논문집
    • /
    • 제29권2호
    • /
    • pp.47-54
    • /
    • 2009
  • The amount of incident rays over inclination according to direction has been widely utilized as important data m installing solar thermal systems. To optimize the incident solar radiation, the slope, that is the angle between the plane surface in question and the horizontal, and the solar azimuth angles are needed for these solar thermal systems. This is because the performance of the solar thermal systems in much affected by angle and direction of incident rays. Recognizing that factors mentioned above are of importance, actual experiment on the moving route of the sun have been performed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. After all, the standard for designing highly optimized solar thermal systems will be provided for designers and employees working in the solar collector related industries.

방위별 경사면일사량 분석에 관한 연구 (A Study on the Analysis of Solar Radiation on Inclined Surfaces)

  • 조덕기;전일수;전명석;강용혁;오정무
    • 한국태양에너지학회 논문집
    • /
    • 제21권3호
    • /
    • pp.19-24
    • /
    • 2001
  • The amount of incident solar rays on inclined surfaces with various directions has been widely utilized as important data in installing solar collector, hot water system, and photovoltaic module, and designing solar buildings and house. This is because the performance of the solar energy applied systems is much affected by angle and direction of incident rays. Recognizing those factors mentioned above are of importance, actual experiment has been peformed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. The results obtained in this research could be used in designing optimal solar systems.

  • PDF

Study on the Characteristics of the Korea Internet AS-Level Topology Using Node Degree and Node Connectivity Metrics

  • 오동익;이강원
    • 한국통신학회논문지
    • /
    • 제38B권6호
    • /
    • pp.417-426
    • /
    • 2013
  • The Korea Internet AS-level topology was constructed using three data sources: Border Gateway Protocol (BGP) trace collector, Internet Routing Registry (IRR), and Internet Exchange Point (IXP). It has 685 nodes and 1,428 links. The Korea Internet AS-level topology is a small regional subgraph of the massive global one. We investigate how well the Korea Internet preserves the topological characteristics of the global one or how different they are. We carefully select several topology metrics that can analyze the characteristics of the Korea Internet AS-level topology. We also investigate how well Internet topology generators can represent the characteristics of the Korea Internet AS-level topology.