• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.3
• /
• pp.1-9
• /
• 1994

In this paper as a new approach for real-time multitarget tracking, a hybrid OptoNeural multitarget tracking system based on optical BJTC and neural networks data association algorithm is suggested. In the proposed hybrid tracking system, an optical BJTC is introduced as a preprocessor to reduce the massive input target data into a few correlation peak signals and then the neural networks data association algorithm is used for the massively parallel data association between measurement signals and targets in real-time. Finally, new hybrid type OptoNeural target tracking system is constructed and then some experimental results on multitarget tracking is included. The real-time implementation method of the proposed hybrid system is also discussed.

• Journal of Information Technology Applications and Management
• /
• v.13 no.3
• /
• pp.59-74
• /
• 2006

According to developing Wireless Communication, not only a location based service at the outside but also a location based service at the inside was more increased socially. This paper proposes the efficient algorithm to locate a transfer object in frequent change of indoor environment using indoor location tracking system we develop ourself. Proposing algorithm in this paper can locate a transfer object using the Fingerprint, one of the Location Tracking techniques which are used in general to minimize error data between Location Tracking System and Fingerprint, using this way that corrects location data as KF apply to result data can improve accuracy of a transfer object. At last we are going to compare and analyze existing typical triangulation with proposed Indoor location tracking system to demonstrate algorithm efficiency for proposed Indoor location tracking system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.4
• /
• pp.399-406
• /
• 2008

Tracking system is developed to receive both telemetry data and video data which are transmitted by radio frequency for the flight test of high manuvering vehicle. Tracking method of tracking system is the phase comparative monopulse that produce tracking data by measuring the phase difference of signal which is received by four patch antennas. The performance of tracking system is verified by flight test for RC helicopter and rocket.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.171-181
• /
• 2012

As a sub-system of an air traffic control system, SDP(Surveillance Data Processor) provides with the system tracks of aircraft using the surveillance sensor data from various air traffic surveillance sensors, such as radars. Therefore, the high accuracy of tracking results is a crucial requirement for safe flights, and verification of the required system performance of SDP is an essential step in development. Moreover, the quantitative evaluation of target tracking accuracy is important for newly developed SDP, since there are several tracking methods for Multi-Sensor Multi-Target Tracking, such as MRT(Multi Radar Tracking), inevitably required as the main function of SDP. In this study, definition of required system performances, establishment of test environment, and test results for MRT performance evaluation of SDP, which is being developed in KARI(Korea Airspace Research Institute) are presented.

• Aerospace Engineering and Technology
• /
• v.10 no.1
• /
• pp.116-121
• /
• 2011

The tracking radar systems in NARO space center are used in order to acquire the TSPI (Time, Space, and Position Information) data of the launch vehicle. The tracking radar produce the measurements of tracked targets in the radar-centered coordinate system. When the tracking radar is in the Cartesian/Polar tracking mode, the state vector data is sent in radar-centered Cartesian/Polar coordinate system to RCC. RCC also send the slaving data in Test Range coordinate system to the tracking radar. So, the tracking radars have to transform the slaving data in Test Range coordinate system into in radar-centered coordinate system. In this study, we described the coordinate transformation between radar-centered coordinate system and Test Range coordinated system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.12
• /
• pp.1159-1166
• /
• 2010

Today, detecting the location of moving object has been traced as various methods in our world. In this paper, we preset the system to improve the estimation accuracy utilizing detail localization using radar sensor based on WSN and situational awareness for a calibration (context aware) database, Rail concept. A variety of existing location tracking method has a problem with receiving of data and accuracy as tracking methodology, and since these located data are the only data to be collected for location tracing, the context aware or monitering as the surrounding environment is limited. So, in this paper, we enhanced the distance aware accuracy using radar sensor utilizing the Doppler effect among the distance measuring method, estimated the location using the Triangulation algorithm. Also, since we composed the environment data(temperature, illuminancem, humidity, noise) to entry of the database, it can be utilized in location-based service according to the later action information inference and positive context decision. In order to verify the validity of the suggested method, we give a few random situation and built test bed of designed node, and over the various test we proved the utilizing the context information through route tracking of moving and data processing.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.3
• /
• pp.31-39
• /
• 2014

In KSLV-I launch mission, real-time data from the tracking stations are acquired, processed and distributed by the Mission Control System to the user group who needed to monitor processed data for safety and flight monitoring purposes. The processed trajectory data by the mission control system is sent to each tracking system for target designation in case of tracking failure. Also, the processed data are used for decision making for flight termination when anomalies occur during flight of the launch vehicle. In this paper, we propose the processing mechanism of slaving data which plays a key role of launch vehicle tracking mission. The best position data is selected by predefined logic and current status after every available position data are acquired and pre-processed. And, the slaving data is distributed to each tracking stations through time delay is compensated by extrapolation. For the accurate processing, operation timing of every procesing modules are triggered by time-tick signal(25ms period) which is driven from UTC(Universial Time Coordinates) time. To evaluate the proposed method, we compared slaving data to the position data which received by tracking radar. The experiments show the average difference value is below 0.01 degree.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.12
• /
• pp.55-61
• /
• 2017

In this paper, we propose a novel tracking method using target separation and detection that are based on discriminative correlation filter (DCF), which is studied a lot recently. 'Retainability' is one of the most important factor of tracking. There are some factors making retainability of tracking worse. Especially, fast movement and occlusion of a target frequently occur in image data, and when it happens, it would make target lost. As a result, the tracking cannot be retained. For maintaining a robust tracking, in this paper, separation of a target is used so that normal tracking is maintained even though some part of a target is occluded. The detection algorithm is executed and find new location of the target when the target gets out of tracking range due to occlusion of whole part of a target or fast movement speed of a target. A variety of experiments with various image data sets are conducted. The algorithm proposed in this paper showed better performance than other conventional algorithms when fast movement and occlusion of a target occur.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1281-1286
• /
• 2014

This paper presents an iterative learning control (ILC) approach for tracking problems with specified data points that are desired points at certain time instants. To design ILC systems for such problems, unlike traditional ILC approaches, an algorithm which updates not only the control signal but also the reference trajectory at each trial will be developed. The relationship between the reference trajectory and ILC control in tracking problems where there are specified data points through which the system should pass is investigated as the rate of convergence. In traditional ILC, the desired data is stored in a tracking profile file. Due to the huge size of the data file containing the target points, it is important to reduce the computational cost. Finally, simulation results of the presented technique are mentioned and compared to other related works to confirm the effectiveness of proposed scheme.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.4
• /
• pp.388-396
• /
• 2011

Sun tracking system is the most important subsystem in parabolic dish type solar thermal power plant, since it determines the amount of thermal energy to be collected, thus affects the efficiency of solar thermal power plant most significantly. Various types of sun tracking systems are currently used. Among them, use of photo sensors to located the sun(which is called sensor type) and use of astronomical algorithm to compute the sun position(which is called program type) are two of the mostly used methods. Recently some uses CCD sensor, like CCD camera, which is called image processing type sun tracking system. This work is concerned with the analysis of sun tracking performance of various types of sun tracking systems currently used in the parabolic dish type solar thermal power plant. We first developed a sun tracking error measurement system. Then, we evaluate the performance of five different types of sun tracking systems, sensor type, program type, hybrid type(use of sensor and computed sun position simultaneously), tracking error compensated program type and image processing type. Experimentally obtained data shows that the tracking error compensated program type sun tracking system is very effective and could provide a good sun tracking performance. Also the data obtained shows that the performance of sensor type sun tracking system is being affected by the cloud significantly, while the performance of a program type sun tracking system is being affected by the sun tracking system's mechanical and installation errors very much. Finally image processing type sun tracking system can provide accurate sun tracking performance, but costs more and requires more computational time.