• Journal of Korean Neurosurgical Society
• /
• v.64 no.5
• /
• pp.791-798
• /
• 2021

Objective : The period of mechanical ventilator (MV)-dependent respiratory failure after cervical spinal cord injury (CSCI) varies from patient to patient. This study aimed to identify predictors of MV at hospital discharge (MVDC) due to prolonged respiratory failure among patients with MV after CSCI. Methods : Two hundred forty-three patients with CSCI were admitted to our institution between May 2006 and April 2018. Their medical records and radiographic data were retrospectively reviewed. Level and completeness of injury were defined according to the American Spinal Injury Association (ASIA) standards. Respiratory failure was defined as the requirement for definitive airway and assistance of MV. We also evaluated magnetic resonance imaging characteristics of the cervical spine. These characteristics included : maximum canal compromise (MCC); intramedullary hematoma or cord transection; and integrity of the disco-ligamentous complex for assessment of the Subaxial Cervical Spine Injury Classification (SLIC) scoring. The inclusion criteria were patients with CSCI who underwent decompression surgery within 48 hours after trauma with respiratory failure during hospital stay. Patients with Glasgow coma scale 12 or lower, major fatal trauma of vital organs, or stroke caused by vertebral artery injury were excluded from the study. Results : Out of 243 patients with CSCI, 30 required MV during their hospital stay, and 27 met the inclusion criteria. Among them, 48.1% (13/27) of patients had MVDC with greater than 30 days MV or death caused by aspiration pneumonia. In total, 51.9% (14/27) of patients could be weaned from MV during 30 days or less of hospital stay (MV days : MVDC 38.23±20.79 vs. MV weaning, 13.57±8.40; p<0.001). Vital signs at hospital arrival, smoking, the American Society of Anesthesiologists classification, Associated injury with Injury Severity Score, SLIC score, and length of cord edema did not differ between the MVDC and MV weaning groups. The ASIA impairment scale, level of injury within C3 to C6, and MCC significantly affected MVDC. The MCC significantly correlated with MVDC, and the optimal cutoff value was 51.40%, with 76.9% sensitivity and 78.6% specificity. In multivariate logistic regression analysis, MCC >51.4% was a significant risk factor for MVDC (odds ratio, 7.574; p=0.039). Conclusion : As a method of predicting which patients would be able to undergo weaning from MV early, the MCC is a valid factor. If the MCC exceeds 51.4%, prognosis of respiratory function becomes poor and the probability of MVDC is increased.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.25 no.3
• /
• pp.68-76
• /
• 2021

Storage racks have suffered huge losses due to earthquakes, but related research and regulations are relatively insufficient non-structural elements compared to the structural elements. In this study, we tried to experimentally analyze the behavioral characteristics of storage racks due to external force according to the fixing conditions of the column-foundations connection of storage racks. In general, the column-foundations connection of storage racks is installed according to the user's convenience without installation standards and regulations. For this reason, this study conducted a behavior analysis test on four full-scale storage racks with the condition of column-foundations connection of four typical storage racks. The behavior characteristics analysis test was performed by two-direction of the shake table with El-Centro seismic wave. To confirm the behavior characteristics according to the magnitude of the seismic load, 50% ~ 150% of the seismic waves were increased by 50% for each test. In addition, a resonance search test was conducted to confirm the natural frequency of each storage racks foundations fixing condition. Among the data obtained through the test, the displacement of the top layer and the permanent displacement after the test were compared for each condition to analyze the behavior characteristics of the column-foundations fixed conditions of the storage racks. As a result, the change of natural frequency was small in storage racks due to the change of the conditions of the foundations, and the behavior characteristics were changed due to the difference of the restoring force due to the change of the storage racks foundations condition rather than the influence of the natural frequency of the input load.

• Journal of Internet Computing and Services
• /
• v.21 no.6
• /
• pp.41-50
• /
• 2020

The consequences of wearing high heels can be different according to the heel height, gait speed, shoe design, heel base area, and shoe size. This study aimed to focus on the knee extension and flexion range of motion (ROM) during gait, which were challenged by wearing five different shoe heel types and two different self-selected gait speeds (comfortable and fast) as experimental conditions. Measurement standards of knee extension and flexion ROM were individually calibrated at the time of heel strike, mid-stance, toe-off, and stance phase based on the 2-minute video recordings of each gait condition. Seven healthy young women (20.7 ± 0.8 years) participated and they were asked to walk on a treadmill wearing the five given shoes at a self-selected comfortable speed (average of 2.4 ± 0.3 km/h) and a fast speed (average of 5.1 ± 0.2 km/h) in a random order. All of the shoes were in size 23.5 cm. Three of the given shoes were 9.0 cm in height, the other two were flat shoes and sneakers. A motion capture software (Kinovea 0.8.27) was used to measure the kinematic data; changes in the knee angles during each gait. During fast speed gait, the knee extension angles at heel strike and mid-stance were significantly decreased in all of the 3 high heels (p<0.05). The results revealed that fast gait speed causes knee flexion angle to significantly increase at toe-off in all five types of shoes. However, there was a significant difference in both the knee flexion and extension angles when the gait in stiletto heels and flat shoes were compared in fast gait condition (p<0.05). This showed that walking fast in high heels leads to abnormal knee ROM and thus can cause damages to the knee joints. The findings in this preliminary study can be a basis for future studies on the kinematic changes in the lower extremity during gait and for the analysis of causes and preventive methods for musculoskeletal injuries related to wearing high heels.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.138-147
• /
• 2021

The purpose of this study was to develop a measuring tool for the health promotion behavior of Korean nurses. This would address the lack of a proven tool that reflects the nature of the nurses' nursing environment. This study was conducted on 530 nurses from January to December 2019. A literature review and focus group interview were conducted, data analysis was carried out to measure validity and reliability, and the conceptual framework was constructed by applying the IMB model. Five factors namely self-concept (2 questions), hospital life management (4 questions), knowledge and information regarding health (5 questions), physical and mental stress management (3 questions), and work adaptation (2 questions) were framed into 16 questions. The model fit was 346.23 (��<.001), Parsimonious Normed Fit Index (PNFI) was 0.60, and Parsimonious Comparative Fit Index (PCFI) was 0.63, which met the acceptance criteria, and the Root Mean Square Error of Approximation (RMSEA) was 0.10. Goodness of Fit Index (GFI) was 0.88, Comparative Fit Index (CFI) was 0.85, and Incremental Fit Index (IFI) was 0.85 which were found to be acceptable as per the applicable standards. All items had a Cronbach's �� score of .85, which ensured stable reliability. The nurse's health promotion behavior measurement tool developed in this study will be used to measure the nurse's health promotion behavior in terms of nursing practice which will help in understanding the broad contours of this behavior.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.597-602
• /
• 2021

Even in the era of the 4th industrial revolution, the prevention of industrial accidents is still an important issue in industrial sites. In solving the problem of industrial safety, a product can be difficult to market if there is a lack of standard or method for a reliable performance evaluation. The purpose of this study was to develop and evaluate a test method for a wearable airbag product for protecting the body from falls that was newly developed to respond to fall accidents in industrial sites. As a research method, reliable evaluation standards were developed and applied through four stages of the evaluation and development process (Step 1: Product review, Step 2: Data research, Step 3: Expert meeting, Step 4: Drawing evaluation standard). In addition, the impact force was evaluated according to the developed evaluation standard. The fall impact force obtained through the evaluation showed a reduction effect of approximately 96% compared to the existing impact force. Therefore, the fall impact force was reduced significantly when the airbag was applied. This will enable new convergence products to be launched on the market and produce an environment where industrial workers can work safely.

• Informatization Policy
• /
• v.28 no.1
• /
• pp.3-21
• /
• 2021

Klaus Schwab's discussion on the Fourth Industrial Revolution provides a framework for predicting the direction of legal technology development. Technological convergence, which has emerged as the core concept of the Fourth Industrial Revolution has a significant effect on legal technology. In particular, various new technologies, such as legal chatbots and platforms, are being introduced to enhance efficiency and accessibility in the legal field. However, legal technology is still in its early stage, with institutional improvement needed to vitalize the industry. In this paper, we first specify the concept and classification of legal technology in Chapter 2, followed by trends and limitations in Chapter 3 and ways of vitalizing legal technology in the future in Chapter 4. To invigorate legal technology development, it is necessary to put in place legal regulatory measures that stipulate the active disclosure of legal data, such as precedents, and make free use of such measures. In the law, many issues, such as the safety of artificial intelligence, personal information protection, and ethical standards, will be discussed in the future. Therefore, via this paper, we hope to promote the formation of social consensus and prepare countermeasures, such as legislative measures.

• Analytical Science and Technology
• /
• v.33 no.6
• /
• pp.262-273
• /
• 2020

A fluorine content analysis method for krill oils, which is a representative oil formulation in foods, was developed in compliance with the Korea Food and Drug Ministry's "Guidelines for Validation of Testing Methods Related to Food". Using this method for krill oils, the presence of impurities was evaluated via combustion-ion chromatography (C-IC). A review of published technical data on fluorine in krill oils showed that while the traditional wet potentiometric method was typically used, it was not reliable. Moreover, there was no food testing/analysis laboratory in Korea to perform a fluorine test analysis on such an oil matrix. Therefore, we identified halogen (fluorine) tests, developed to national and international standards, and developed a test method suitable for krill oils by selecting a C-IC method that is sufficiently applicable to the oil matrix. Based on the characteristics of the oil matrix, the optimal test method was established through various experiments by reviewing the concerns related to loss and interference in the preparation and introduction of samples. The fluorine content test was carried out on 11 krill oil products that were purchased online. Most products (with the exception of only one) were found to contain less than the reporting limit obtained by the test method. Furthermore, after additional testing, a high fluorine content of approximately 2,000 ~ 3,000 mg/kg was detected on the krill surface, although the concentration varied depending on the area of the krill. A comparison with samples from two ISO/IEC 17025 testing laboratories confirmed that there was no significant difference in the statistical analysis results obtained by ANOVA among the three laboratories. A testing guide for fluorine content analysis was completed.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.77-87
• /
• 2021

Smart Factory refers to a factory that can be controlled by itself with an intelligent factory that improves productivity, quality and customer satisfaction by combining the entire process of manufacturing and production with digital automation solutions. The manufacturing industry around the world is rapidly changing, with Germany, Europe, and the United States at the center. In order to cope with such changes, the Korean government is also implementing a policy to spread the supply of smart factories for small and medium-sized companies, and related ministries and agencies such as the Ministry of Commerce, Industry and Energy, the Ministry of SMEs and Venture Business, the Korea Institute of Technology and Information Promotion, and local technoparks, as well as large companies such as Samsung, SK and LG are actively investing in smart manufacturing projects to support smart factories[1]. Factory Automation (FA) construction has many issues regarding the connection of heterogeneous equipment. The most difficult aspect of configuring various communications from various equipment is the reason. Although it may not be known if there are standards or products made up of the same company, it is not easy to build equipment that is old, up-to-date, and different use environments through a series of communications. To solve this problem, we would like to propose a method of communication using Modbus, one of FieldBus, which is one of the many industrial devices of PLC, a representative facility control system, and is used as a communication standard.

• Journal of Food Hygiene and Safety
• /
• v.36 no.4
• /
• pp.281-288
• /
• 2021

This study was conducted to analyze and compare the concentrations of heavy metals in 430 different products of 20 types of herbal medicines available in the domestic market in Korea by Graphite Furnace-Atomic Absorption Spectrometry (GF-AAS) and automated mercury analyzer. The accuracy for lead (Pb), arsenic (As), cadmium (Cd), and mercury (Hg) was in the range 92.67-102.56%, and the precision was 0.21-6.00 relative standard deviation (RSD%), which was in compliance with the Codex acceptable range. Furthermore, the Food Analysis Performance Assessment Scheme (FAPAS) quality control (QC) material showed a recovery range of 96.7-102.0% and 0.33-4.93 RSD%. The average contents (㎍/kg) of Pb, As, Cd, and Hg in herbal medicines were 254.9 (not detected (N.D.)-2,515.2), 171.0 (N.D.-2,465.2), 99.2 (N.D.-797.1), and 6.0 (N.D.-83.6), respectively. Based on the quantitative analysis results, the heavy metal contents of 20 types of herbal medicines distributed in Korea are within the acceptable range according to the standards issued by the Ministry of Food and Drug Safety (MFDS). By using the manufacturer of herbal products as the standard for QC, the Pb, As, Cd, and Hg contents were investigated in the packaging process just before distribution to determine the actual conditions of residual heavy metals in herbal medicines. Thus, these result may contribute to monitoring the QC of herbal medicines distributed in Korea and could provide basic data for supplying safe herbal medicines to the public.

• Journal of the Korean earth science society
• /
• v.42 no.6
• /
• pp.717-733
• /
• 2021

This study is aimed to provide basic data to set the direction of polar literacy education and to raise awareness of the importance of polar research. Elementary, middle, and high school students' perception of the polar region was examined in terms of current status of polar information, impression regarding polar regions, and awareness of related issues. The study included 975 students from nine elementary, middle, and high schools, who responded to 16 questions, including close-ended and open-ended items. The results suggest that students had more experiences regarding the polar region on audiovisual media, but relatively limited learning experiences in school education. The impression they had of the polar region was confined to the monotonous image of a polar bear in crisis, following the melting of the glacier due to global warming. The students formed powerful images by combining scenes they saw in audiovisual media with emotions. In terms of recognizing problems in the polar region, the students were generally interested in creatures, natural environment, and climate change, but their interests varied depending on their school level and their own career path. The students highly valued the scientist's status as agents to address the problems facing the region, and gave priority to global citizenship values rather than practical standards. Based on the results, we suggest the following: introducing and systematizing content focusing on the polar region in the school curriculum, providing a differentiated learning experience through cooperation between scientists and educators, establishing polar literacy based on concepts that are relevant to various subjects, earth system-centered learning approach, setting the direction for follow-up studies and the need for science education that incorporates diverse values.