• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.5
• /
• pp.967-973
• /
• 2009

Recently, as 3rd-generation mobile communication services using high-speed data rate system are widely employed, the demand for a variety of real-time data services such as VoIP service are also increased. Unlike typical data packets, VoIP packets have delay bound and low loss rate requirement. In this paper we propose a new scheduling algorithm that schedule two deferent kinds of packets efficiently, considering the characteristics of VoIP. Basically this algorithm considers both time delay and channel condition and gives priority depending on the time delay. Simulation results show that the proposed algorithm works more efficiently than conventional algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.5
• /
• pp.611-618
• /
• 1993

A common requirement in digital communication systems is the generation of prescribed shape. The purpose of this paper is implement an efficient digital waveform filter by using the look-up table in the RDS(Radio Data System) encoder. And it has been shown that transmitted data can be recovered without an error. In order to implement an efficient waveform filter, the control algorithm is designed. For the purpose of composing an IC, the digital waveform filter is implemented by using the discrete elements. Moreover in this paper it has been proved that the proposed digital waveform filter can be applied to the RDS encoder.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.7
• /
• pp.782-787
• /
• 2014

Due to the complicated steel structure and safety concern, it is very difficult to deploy wireless networks in power plants. This paper presents a hybrid network, named as $P^2HYMN$ (Power Plant HYbrid Maintenance Network), encompassing PLC (Power Line Communication), TLC (Telephone Line Communication), and Wireless LAN. The design goal of $P^2HYMN$ is to integrate multimedia data such as design drawings of control equipment, process data, and video image data for maintenance operation in electric power plants. A Multiplex Line Communication (MLC) device was designed and implemented to integrate PLC, TLC, and Wireless LAN into $P^2HYMN$. Performance test of $P^2HYMN$ has been conducted on a testbed under various conditions. The throughput of TLC was shown as 39 Mbps. Because the bandwidth requirement per camera is 8.5 Mbps on average, TLC is expected to support more thant four video camera at the same time.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.3
• /
• pp.1-10
• /
• 1997

We present an approach to high-level synthesis for a specific target architecture-partitioned bus architecture. In this approach, we have specific goals of minimizing data transfer length and number of buses in addition to common synthesis goals such as minimizing number of control steps and satisfying given resource constraint. Minimizing data transfer length and number of buses can be very important design goals in the era of deep submicron technology in which interconnection delay and area dominate total delay and area of the chip to be designed. in partitioned bus architecture, to get optimal solution satisfying all the goals, partitioning of operation nodes among segments and ordering of segments as well as scheduling and allocation/binding must be considered concurrently. Those additional goals may impose much more complexity on the existing high-level synthesis problem. To cope with this increased complexity and get reasonable results, we have employed two ideas in ur synthesis approach-extension of the target architecture to alleviate bus requirement for data transfer and adoption of genetic algorithm as a principal methodology for design space exploration. Experimental results show that our approach is a promising high-level synthesis mehtodology for partitioned bus architecture.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.371-377
• /
• 2015

This paper is about the RF transceiver designed and implementation for common data link. The trasmitter is configured as a frequency up-converter, a power amplifier and a duplexer. The receiver is configured as a duplxer, a frequency down-converter and a low noise amplifier. The maximum transmission distance, the reception sensitivity is designed to meet the electrical and temperature characteristics and the like. Using a modeling and simulation in order to meet the requirements of the RF transceiver has been designed and implemented. Transmitting output power and Noise Figure has been measured with 38.58dBm and 5.5dB, respectively. All of the electrical and temperature specifications was meet. Was confirmed all of the requirement specification by electrical characteristics test and temperature characteristics test.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1413-1427
• /
• 2007

The Train Networks has a goal which requires the fast and correct data communication for distributable equipment systems. For this, in 1999, some train makers had established the standard TCN(IEC61375-1) for the inter-operating between equipment systems. Recently, TCN is being used in EU, China and the requirement to use it is growing up by many other countries more and more. The TCN was adopted at Korea High-speed Train with first in Korea, and Rotem Company finished the design of TCMS with TCN network for Istanbul EMU and KTX-2 Train and tests them. TCN(Train Communication Networks) defines the set of communication vehicle buses and train buses. The MVB(Multifunction Vehicle Bus) defines the data communication interface of equipment located in a vehicle and the WTB(Wire Train Bus) defines the data communication interface between vehicles. This paper examines whether the result of on-board test is satisfied with the IEC61375-1(International Electrotechnical Commission 61375-1) which is the international standard of TCN and introduce the results.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.375-377
• /
• 2008

The KOMPSAT2 Terminal Polar Station was recently installed at near North Pole, Tromso, and Toulouse. The K2PS consists of one receiving station and two processing sites. The receiving station has been installed at SvalSat ($N78^{\circ}$, $E15^{\circ}$ ), and the two receiving sites have been installed at KSAT (Kongsberg Satellite Service AS), Tromso, Norway ($N69^{\circ}$ ,$E18^{\circ}$ ) and SISA, Toulouse, France ($N43^{\circ}$ ,$E1^{\circ}$ ). The products ofK2PS system can be classified to two categories: Level 1R product and Level 1G product. The Level 1R product is radiometric corrected product with RPC (Rational Polynomial Coefficients) and the Level 1G product is geometric corrected product with POD (Precise Orbit Data) and PAD (Precise Attitude Data) data based on Level 1R product. To meet a SISA (Spot Image SA)'s requirement, K2PS system has high performance product producing capability. This paper describes overall K2PS systems' production generation flow and the mass production test result of K2PS systems.

• Journal of Korean Association for Spatial Structures
• /
• v.17 no.4
• /
• pp.93-102
• /
• 2017

Wireless MEMS sensors have common features such as wireless communication, data measurement, embedded processing, battery-based self-power, and low cost, and increased measurement effectiveness. Wireless MEMS sensors enable efficient SHM without interfering with location because there is no requirement for triboelectric noise and cumbersome cables. However, there is little research on the communication distance with sensors and data. For instance, existing researches have limited communication distance experiments in civil engineering bridges. It is also necessary to investigate the characteristics of dynamic behavior and the communication distance of architectural structures with different wireless transmission/reception environments. Therefore, in a building structure with walls and slabs instead of open spaces, MEMS sensors and data loggers were used as distance experiments where communication disturbance between the vertical slab and the horizontal wall could actually be communicated.

• International Journal of Ocean System Engineering
• /
• v.1 no.4
• /
• pp.205-210
• /
• 2011

High data-rate underwater communications is demanded. This demand imposes stringent requirements on underwater communication equipment of phase-locked-loop (PLL). Phase noise in PLL is unwanted and unavoidable. In this paper, we investigate the PLL phase noise effect on high order QAM for underwater communication systems. The phase noise model using power spectral density is adopted for performance evaluation. The phase noise components considered in PLL are reference oscillator, voltage controlled oscillator (VCO), filter and divider. The filters in PLL noise are assumed to be second order active and passive low pass filters. Through simulation, we analyze the phase noise characteristics of the four components and then investigate the performance improvement factor of each component. Consequently, we derive specifications of VCO, phase detector, divider to meet performance requirement of high data-rate communication using QAM under phase noise influence.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.532-535
• /
• 2008

The requirement of Digital Culture Content(Movie, Music, Animation, Digital TV, Exhibition and etc.) is increasing so variety and quantity of content is also increasing. The Movie what majority of the digital Content is developing of technology and data. In the result, the efficient retrieval service has required and user want to use a recommendation engine and semantic retrieval methods through the recommendation system. Therefore, this paper will suggest analysing trait element of digital content data, building of retrieval technology, analysing and retrieval technology base on KANSEI vocabulary and etc. For the these, we made a extraction technology of trait element based on semantics and KANSEI processing algorithm based on color information.