• Journal of Nutrition and Health
• /
• v.55 no.2
• /
• pp.201-210
• /
• 2022

Vitamin A (Vit A) is a lipid-soluble vitamin required for diverse normal body functions, including good vision, reproduction, growth, development, and cellular differentiation. The therapeutic effects of Vit A have been demonstrated for the treatments of inflammation, low immunity, and cancer. The present review discusses the scientific evidence for establishing the 2020 Dietary Reference Intakes for Koreans (KDRI) for Vit A, issues caused by unit change of Vit A, and suggestions for the 2025 KDRI revision. Due to the changes in the standard bodyweight observed in several age groups, the 2020 KDRI had minor revisions as compared to the 2015 KDRI. In the 2015 KDRI, the Vit A unit has changed from retinol equivalent (RE) to retinol activity equivalent (RAE) and the activity of carotenoids became half with RAE compared to RE due to this unit change. Since the Vit A intake of Koreans relies heavily on plant-based carotenoids, the dietary intake of Vit A in Koreans as determined by considering the RAE was much lower than values obtained with RE. The analysis for Vit A intake by the Korean National Health and Nutrition Survey only reflects intakes of retinol and beta-carotene. Thus, it would be necessary to include the consumption of other provitamin A, such as alpha-carotene and beta-cryptoxanthin. Moreover, assessing the amounts of Vit A in foods should be customized to Korean diets since there are seasonal variations in the carotenoid concentration of plants. Moreover, other factors such as age- and sex-specific intake data and considerations of baseline micronutrient status, body mass index, and dietary patterns should be considered for developing more precise KDRI. In particular, the Vit A requirement needs to be met by consuming diverse foods, including animal foods.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.2
• /
• pp.143-150
• /
• 2021

The recent spread of novel and highly variant pathogenic viruses, including the coronavirus (SARS-CoV-2), has increased the demand for diagnostic testing for rapid confirmation. This has resulted in investigating the functional capability of each space, and preparing facility guidelines to secure the safety of medical technologists. During viral evaluations, there is a requirement of negative pressure facilities along with thread separation, during pre-treatment of samples and before nucleic acid amplification. Space composition therefore needs to be planned by considering unidirectional air flow. This classification of safety management facilities is designated as biosafety level 2, and personal protective equipment is placed accordingly. In case of handling dangerous materials, they need to be carried out of the biosafety cabinet, and sterilizers are required for suitable disposal of infectious agents. A common feature of domestic laboratories is maintenance of the sample pre-treatment space at a negative pressure of -2.5 Pa or less, and arranging separate pre-treatment and reagent preparation spaces during the test process. We believe that the data generated in this study is meaningful, and offers an efficient direction and detailed flow for separation of the inspection process and space functions. Moreover, this study introduces construction of the laboratory by applying the safety management standards.

• Journal of Korean Library and Information Science Society
• /
• v.53 no.3
• /
• pp.343-376
• /
• 2022

Continuing education for professionals is the most basic requirement for continuous professional development. The enhancement of the professionalism of librarians will also be possible through the establishment of a systematic continuing education strategy of the national level. In this study, we tried to derive a strategy for continuing education for librarians in Korea by analyzing the internal and external environment of national institutions that are the center of continuing education for librarians. To this end, we proposed a complex framework of PEST-3Cs-SWOT as a systematic environmental analysis methodology and tried to apply it. For PEST analysis, literature related to library, librarian, and librarian education was extensively reviewed, and for 3Cs analysis, in-depth interviews with internal employees, questionnaire data analysis on the demand survey of training subjects, and case studies of similar institutions in Korea and abroad were conducted. Based on this, SWOT analysis was conducted, and finally, 4 strengths-opportunity strategic tasks, 5 weaknesses-opportunity strategic tasks, 5 strength-threat strategic tasks, and 3 weaknesses-threat strategic tasks were derived. This study will be meaningful in that it presents strategic tasks for continuing education institutions in Korea, and at the same time suggests and applies a complex analysis methodology that can be applied to tasks similar to development plans and strategy establishment.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.4
• /
• pp.285-292
• /
• 2022

The education and training system, the ISCO (International Standard Classification of Occupations), and the legal systems of Japan and the United States consider all ophthalmic optometry laboratory personnel as ophthalmologists. They encompass optometrists, orthoptists, optometric technicians, and ophthalmic medical technicians. Data retrieved from the KOSIS (Korean Statistical Information Service) revealed that the number of opticians associated with the department of ophthalmology in 2022 could be appraised by classifying their medical institutions; contrarily, the number of clinical laboratory technologists could not be assessed. However, the current research investigated a general tertiary hospital and determined that clinical laboratory technologists outnumber opticians. Classification in Korea is based on ophthalmic optometry laboratory personnel, ISCO, ISCED (International Standard Classification of Education), the medical service act, the act on medical service technologists, and the higher education act. These results cannot be compared to the optometrists evaluated in the United States. Ophthalmology is a suitable profession for optometric technologists and technicians who perform under the instructions of ophthalmologists and optometrists. The field of eye healthcare would be benefitted by assigning the management based on their qualification according to the requirement of the job title, such as 'Clinical Optometry Technologist' to be given to clinical laboratory technologists and opticians who work in the ophthalmic optometry laboratories after obtaining a private qualification endowed by the Korean Ophthalmological Society and the Korean Optometry Society.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.251-260
• /
• 2023

The construction of free-form structures with intricate curved exteriors necessitates the use of bespoke molds. To fulfill this requirement, a blend of Phase Change Material(PCM) and Ultra-High Performance Concrete(UHPC) is utilized. PCM endows the solution with recyclability, while UHPC facilitates the effortless execution of curvature in the mold fabrication process. However, it's worth mentioning that the melting point of PCM hovers around 58-64℃, and the heat emanating from UHPC's hydration process can potentially jeopardize the integrity of the PCM mold. Hence, experimental validation of the mold shape is a prerequisite. In the conducted experiment, UHPC was poured into two distinct mold types: one that incorporated a 3mm silicone sheet mounted on the fabricated PCM mold(Panel A), and the other devoid of the silicone sheet(Panel B). The experimental outcomes revealed that Panel A possessed a thickness of 3.793mm, while Panel B exhibited a thickness of 5.72mm. This suggests that the mold lacking the silicone sheet(Panel B) was more susceptible to the thermal effects of hydration. These investigations furnish invaluable fundamental data for the manufacturing of ultra-high strength irregular panels and PCM molds. They contribute substantially to the enrichment of comprehension and application of these materials within the realm of construction.

• Journal of Convergence for Information Technology
• /
• v.12 no.2
• /
• pp.81-93
• /
• 2022

The purpose of this study is to understand the meaning of clinical practice experience, including web-based simulation practice, in the context of the corona pandemic era. As for the research method, data were collected through a focus group interview on the experience of web-based simulation practice and subsequent clinical practice and analyzed by content analysis method. The contents of the two interview groups were analyzed, and the results were divided into 2 components, 7 topic groups, and 18 topics. The first component, the clinical practice, was divided into four topic groups: 'The anxious start of practice in a pandemic situation', 'Direct experience through various cases', 'Training opportunities to prepare as a future nurse', and 'The burden of performance and limited experience'. The second component, the web-based simulation practice, was divided into three topic groups: 'Unfinished nursing practice', 'Indirect experience of clinical nursing in virtual space', and 'Requirement of an integrated practice model'. Clinical practice is a very important part of the nursing education curriculum. However, the nursing that students can perform in the field is very limited. Therefore, to supplement the shortcomings of observation-oriented clinical practice and to increase the quality of practical education, it is necessary to consider a hybrid education model including web-based simulation practice.

• Science of Emotion and Sensibility
• /
• v.26 no.1
• /
• pp.17-32
• /
• 2023

This study aims to study the impact of pet attachment on subjective well-being, focusing on individuals who live with pets. In addition, it is to recognize that their basic psychological requirement mediates between pet attachment and subjective well-being. For this purpose, a survey was performed on 358 adults living with pets nationwide. The final data of 319 people were evaluated after excluding invalid information. Dependent on the theoretical approach of the attachment theory, the human-pet relationship was examined by dividing it into two orthogonal dimensions pet attachment prevention and pet attachment anxiety(Zilcha-Mano et al., 2011). The mediating effects were investigated as an in-depth mechanism that mediates between pet attachment and subjective well-being, the mediating effects were examined, in terms of the three basic psychological needs of Self-Determination Theory, which are autonomy, competence, and relatedness. As an outcome, first, pet attachment prevention and pet attachment anxiety both revealed a negative correlation with subjective well-being. Second, basic psychological needs, which are autonomy, competence, and relatedness, are mediated between pet attachment and subjective well-being. Autonomy, competence, and relatedness fully mediated the relationship between pet attachment avoidance and subjective well-being. Meanwhile, in the case of pet attachment anxiety, only autonomy among basic psychological needs is fully mediated between pet attachment anxiety and subjective well-being in the case of pet attachment avoidance. This means that pet attachment prevention or pet attachment anxiety correlates with subjective well-being by satisfying basic psychological needs instead of directly affecting personal well-being. Regarding the pet effect, it is meaningful to find an in-depth mechanism that the human-pet relationship has for an adaptive and positive impact on humans.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.348-355
• /
• 2024

A current source capable of stably supplying current as a measurement medium is required in order to measure and test important facilities that require large-scale measurement current, such as a control element drive mechanism control system(CEDMCS), in case of dismantling a nuclear power plant. However, it can provides only voltage power as a source, not current, although direct voltage controlled constant current source is essential to test major equipment. That kind of source is not available to supply stable constant current regardless of load variation. It is just voltage supplier. Developing current source is not easy other than voltage source. Very large-scale current source up to ampere class more than such ten times of normal current is inevitable to test above mentioned equipment. So, we developed large-scale current source which is controlled by input DC voltage and supplies constant stable current to object equipment according to this requirement. We measured and tested nuclear power plant equipment using given real site data for a long time and afforded long period load test, and then proved its validity and verification. The developed invetion will be used future installed important equipment measuring and testing.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.36 no.2
• /
• pp.50-60
• /
• 2024

To promote the application of reliability-based design within the Korean coastal engineering community, the author conducted reliability analyses and optimized the design of a vertical-type breakwater, considering multiple limit states in the seas off of Pusan and Gunsan - two representative ports in Korea. In this process, rather than relying on design waves of a specific return period, the author intentionally avoided such constraints. Instead, the author characterized the uncertainties associated with wave force, lift force, and overturning moment - key factors significantly influencing the integrity of a vertical-type breakwater. This characterization was achieved by employing a probabilistic model derived from the frequency analysis results of long-term in-situ wave data. The limit state of the vertical-type breakwater encompassed sliding, overturning, and collapse failure, with the close interrelation between wave force, lift force, and moment described using the Nataf joint probability distribution. Simulation results indicate, as expected, that considering only sliding failure underestimates the failure probability. Furthermore, it was shown that the failure probability of vertical-type breakwaters cannot be consistently secured using design waves with a specific return period. In contrast, breakwaters optimally designed to meet the reliability index requirement of 𝛽-3.5 to 4 consistently achieve a consistent failure probability across all sea areas.

• Nuclear Engineering and Technology
• /
• v.55 no.11
• /
• pp.4274-4281
• /
• 2023

Blanket is of vital importance for engineering application of the fusion reactor. Nuclear heat deposition in materials is the main heat source in blanket structure. In this paper, the three-dimensional method for thermal-hydraulics/neutronics coupling analysis is developed and applied for the full-scale module of the helium-cooled ceramic breeder tritium breeding blanket (HCCB TBB) designed for China Fusion Engineering Test Reactor (CFETR). The explicit coupling scheme is used to support data transfer for coupling analysis based on cell-to-cell mapping method. The coupling algorithm is realized by the user-defined function compiled in Fluent. The three-dimensional model is established, and then the coupling analysis is performed using the paralleled Coupling Analysis of Thermal-hydraulics and Neutronics Interface Code (CATNIC). The results reveal the relatively small influence of the coupling analysis compared to the traditional method using the radial fitting function of internal heat source. However, the coupling analysis method is quite important considering the nonuniform distribution of the neutron wall loading (NWL) along the poloidal direction. Finally, the structure optimization of the blanket is carried out using the coupling method to satisfy the thermal requirement of all materials. The nonlinear effect between thermal-hydraulics and neutronics is found during the blanket structure optimization, and the tritium production performance is slightly reduced after optimization. Such an adverse effect should be thoroughly evaluated in the future work.