• Korean Journal of Optics and Photonics
• /
• v.8 no.6
• /
• pp.445-449
• /
• 1997

The complex refractive indices of $Ge_2Se_2Te_5$ which show reversible phase change between the crystalline phase and an amorphous one depending upon the annealing process have been determined in the spectral range of 0.7-4.5 eV. The $Ge_2Se_2Te_5$ films were DC sputter deposited on the crystalline silicon substrate. The spectro-ellipsometry data of a thick film were analyzed following the modelling procedure where the quantum mechanical dispersion relation were used for the complex refractive indices of both the cryastalline phase $Ge_2Se_2Te_5$ and and amorphous phase $Ge_2Se_2Te_5$, respectively. On the other hand, with the surface micro-roughness layer whose effective thickness was determined from AFM analysis, the spectro-ellipsometry data were numerically inverted to yield the complex refractive index of $Ge_2Se_2Te_5$ at each wavelength. With these set of complex refractive indices, the reflectance spectra were calculated and those spectra obtained from the numerical inversion showed better agreement with the experimental reflection spectra for both the cryastalline phase and an amorphous phase. Finally, the thin $Ge_2Se_2Te_5$ film which has the optimum thickness of 26 nm as the medium for optical recording was also analyzed and the quantitative result of the film thickness and the surface microroughness has been reported.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.107-115
• /
• 2011

Since 2009 The Korean National Police Agency has been pushed "permissive left-turn" forward in order to making progress in Korean traffic operations system. Preceding researches manuals and guidelines present 6 standards(# of accidents # of lanes, pedestrian volume sight # of permissive left-turn lanes vehicle volume) as installation permissive left-turn. But in practical affairs it is most important that secure enough Gap-time between permissive left-turn vehicle and opposite through lane vehicle to make permissive left-turn vehicle move safer and more efficiently. This study suggests applying gap acceptance theory in microscopic model to permissive left-turn installation standards. Analysis methods of this study are field data survey statistical analysis and microscopic simulation analysis. This study collected field data by using AVI recording and measured permissive left-turn vehicle intersection passing time(T1) and against the opposite through lane vehicle Gap-time(T2). And statistical analysis performed about two values that measured before to predict the functionality between T1 and T2. These studies to overcome the limit of sample size carried out a microscopic simulation(VISSIM) plan and collect more samples to input statistical analysis.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.61-67
• /
• 2016

In this paper, a hardware design method is proposed for high speed high precision neutron radiation measurements. Our system is fabricated to use a high performance A/D Converter for digital data conversion of high precision and high speed analog signals. Using a neutron sensor, incident neutron radiation particles are detected; a precision microcurrent measurement module is also included: this module allows for more precise and rapid neutron radiation measurement design. The high speed high precision neutron measurement hardware system is composed of the neutron sensor, variable high voltage generator, microcurrent precision measurement component, embedded system, and display screen. The neutron sensor detects neutron radiation using high density polyethylene. The variable high voltage generator functions as a 0 ~ 2KV variable high voltage generator that is robust against heat and noise; this generator allows the neutron sensor to perform normally. The microcurrent precision measurement component employs a high performance A/D Converter to precisely and swiftly measure the high precision high speed microcurrent signal from the neutron sensor and to convert this analog signal into a digital one. The embedded system component performs multiple functions including neutron radiation measurement for high speed high precision neutron measurements, variable high voltage generator control, wired and wireless communications control, and data recording. Experiments using the proposed high speed high precision neutron measurement hardware shows that the hardware exhibits superior performance compared to that of conventional equipment with regard to measurement uncertainty, neutron measurement rate, accuracy, and neutron measurement range.

• Research in Community and Public Health Nursing
• /
• v.6 no.2
• /
• pp.173-182
• /
• 1995

Primary health care(PHC) has been established since A Health Law for rural residents has been legislated in 1980 following the WHO declaration, 'Health for All 2000'. in 1978. PHC services are presently assumed to be provided by 2038 Community Health Practitioners(CHP) to about 28% out of rural population in Korea. Most CHPs have confronted the adaptation process to the community being practiced although a CHP's role is to evoke community participation for the improvement of their health by themselves. So the purpose of this study is to describe and explain of the commitment of CHPs into the community. Data were collected by direct interview and tape-recording under subjects' permission till theoretical saturation were occured from 6 CHPs. The subjects were 41 years old and have served in the community for 9 years in average. Main questions and concepts were explored from data according to the procedure of the grounded theory methodology. The results are as follows. 1) The number of the main concepts were twenty four that identified Motive, Desire, Personal characteristics, Unfamiliarity, Denial, Feeling of isolation, Self-sacrifice, Kindness, Patience, Assimilation, Respect for the residents, Support by the family, Support by the residents, Achievement, Acceptance of realities, Use of resources, Inducement of cooperation from the residents, Changes of the difference from time orientation between CHP and residents, Attitude as a official, Technical support, Cost management, Satisfaction level, Acknowledgement by the residents and discrepancy. 2) The twenty four concepts were categorized to seven groups such as Motivation, Feeling of Heterogeneity, Self-discipline, Social support, Induced changes in the attitudes of residents, Familarity and Persistent discrepancy. 3) The categorized groups were analyzed on the base of the Causal Conditions, Central Phenomena, Contexts, Intervening Conditions, Action / Interaction Strategies, and Consequences. Central phenomenon in this study was identified to be the feeling of heterogeneity. Community health practitioners experienced unfamiliarity and denial from the community and felt themselves isolated in the first. In time, they won the trust of residents by their efforts including self-sacrifice, kindness, patience, and assimilation. Afterward, practitioners got self-confidence and familiarity with lesser feeling of heterogeneity. Nevertheless, practitioners could not commit themselves completely because of the persistent discrepancy between CHP and residents. 4) On the commitment process, the CHPs' feeling of heterogeneity were decresed and social support increesed and newly evolved induced change of residents through the continuous interaction between CHP and them The contribution of this study would be concluded as follows. 1) It is expected that effective strategies for more rapid committment into the community can be developed based on this study. 2) More easy committment would be possible for the newly appointed CHP through understanding of the committment process identified on this study.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.11
• /
• pp.593-606
• /
• 2016

Computer simulation is widely used in a variety of computational science and engineering fields, including computational fluid dynamics, nano physics, computational chemistry, structural dynamics, and computer-aided optimal design, to simulate the behavior of a system. As the demand for the accuracy and complexity of the simulation grows, however, the cost of executing the simulation is rapidly increasing. It, therefore, is very important to lower the total execution time of the simulation especially when that simulation makes a huge number of repetitions with varying values of input parameters. In this paper we develop a simulation service system that provides the ability to predict the result of the requested simulation without actual execution for that simulation: by recording and then returning previously obtained or predicted results of that simulation. To achieve the goal of avoiding repetitive simulation, the system provides two main functionalities: (1) storing simulation-result records into database and (2) predicting from the database the result of a requested simulation using statistical machine learning techniques. In our experiments we evaluate the prediction performance of the system using real airfoil simulation result data. Our system on average showed a very low error rate at a minimum of 0.9% for a certain output variable. Using the system any user can receive the predicted outcome of her simulation promptly without actually running it, which would otherwise impose a heavy burden on computing and storage resources.

• Journal of the Korean Society of Earth Science Education
• /
• v.14 no.1
• /
• pp.1-20
• /
• 2021

The purpose of this study was to understand students' representational competence while they engaged in learning in geological field trips with scientific models and modeling(Mt. Gwanak and the Hantan-river were formed). Ten students agreed to participate in this study voluntarily. They were attending the Institute of Gifted Education in the Seoul Metropolitan area. The data were collected for all students' activities during field trips and modeling activities using simultaneous video and voice recording, the interview after classes, written data(note) made by the students. The analysis framework that distinguished levels of representational competence and added the resulting interpretation with the final models in the process of scientific models. Results suggested that representational competence levels varied from one to six. However, students showed relatively low levels of representational competence in outdoor learning environments than indoor learning environments. In other words, it began with a relatively low level of representational competence in outdoor class. Then students developed a higher level of representational competence indoor class. Ultimately, we need to understand students' representational competence implies a tool to explain phenomena in the process of modeling activities.

• The Journal of the Korea Contents Association
• /
• v.19 no.8
• /
• pp.653-666
• /
• 2019

This study is designed to find out the protection system of intangible cultural property as the current national policy and analyze the foundational problems in order to suggest the future vision in a way of transmitting the traditional cultural heritage to the descendants, based on the policy support for the intangible cultural property under the control of Commission for Ibuk 5-do (5 Northern Provinces of Korean peninsula). The research issue is first, the aging of the holders of the important cultural properties in Ibuk 5-do and the overcoming of the incomplete transmission system. The second issue is the protective policy of the transmission from the national perspective and the justification of the government's financial support. The third issue is the development of cultural contents by using the intangible cultural properties in Ibuk 5-do and the suggestion of the creative development for the resourcing of culture. As for the research methods, reference research and analysis on interview data and data from the related entities was done were analyzed and the results were actively adopted. The research results showed the followings to be required; first, the aged holders of the cultural properties shall be treated well and at the same time, the holders recognized to hold the transmission ability shall be dually designated. Second, the training system for the younger generation to keep the traditional cultural heritage shall be established; Third, the educational program and school education shall be extended so that the importance of the transmission of the intangible traditional cultural properties in Ibuk 5-do (northern 5 provinces of Korea) shall be recognized; Fourth, the recording system shall be constructed and its application system shall be required. In the end, in order for such development methods to be implemented effectively, active government support is desperately required.

• The Korean Journal of Archival Studies
• /
• no.3
• /
• pp.65-89
• /
• 2001

We, at The Korea Democracy Movement Archives opened temporarily at SungKongHoe University(SKHU), have currently collected about 100,000 recorded materials of democratization movement related with labor, farmer, civilian, human rights, peace, unification, young people, student and women's movements by investigating, collecting and receiving donations from civil organizations and individuals, and about 70,000 data out of this 100,000 data were converted into computer files. The Korea Democracy Movement Archives(temp) at SKHU has a significance in that it is the first archive opened by an organization. Furthermore, the opening of this Archive means the expansion of awareness on recording culture and accumulation of the achievements of the democratization movement in Korea. However, many obstacles still remain in the establishment of this Archive in a full-scale. This article examined many theoretical and realistic obstacles posed to the archivists, who are the professionals responsible for record management, in process of establishing the Archive, and the role and future perspectives of the archivists at The Korea Democracy Movement Archives(temp). The first obstacles in the process of organizing and separating the recorded materials at the Archive is a difficulty in the description of classifying the different movement organizations. The second obstacle is a difficulty in specifically applying the international standard, ISAD(G), of record description in the process of establishing the description items. Through many trials and errors, we need to try to confirm the description befitting. The Korea Democracy Movement Archives through continuous adjustment and complementary measures. The third obstacle is a difficulty in estimating the range and physical and quantitative amount of the recorded materials since the collection of recorded materials is complete. Thus, the answers to these problems lie in continuous efforts to establish a creative classification system befitting the democratization movement in Korea in the process of many trials and errors and endeavor. The evaluation classification done by archivists is a creative act forming record heritage, and archivists need to form record heritage reflecting the evaluation system of a certain period. Moreover, they transmit the shape of the current era in a maximum scale to the future by using the minimum amount of records. An archivist is responsible for two tasks, i.e., preserving a record and making other people to utilize the record by working with record. However, We, at The Korea Democracy Movement Archives(temp), have an additional task of contributing to the democratization movement in korea that has not ended by collecting, preserving and making people to utilize the fragments of memory in the recent history of Korea by establishing the Archives.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.1
• /
• pp.29-38
• /
• 2019

In order to investigate the behavioral characteristics of Pacific cod (Gadus macrocephalus) released at the entrance of Jinhae Bay, Korea, the direction and range of movement, swimming speed of the fish were measured with an acoustic telemetry techniques in winter, 2015. Three wild Pacific codes WC1 to WC3 (total length 66.0, 75.0, 76.0 cm; body weight 2.84, 2.79, 3.47 kg, respectively) were tagged with the acoustic transmitter. WC1 tagged with an acoustic transmitter internally by surgical method, WC2 and WC3, externally with the acoustic data logger and a micro data logger for recording audible sound waves including timer release unit. The movement routes of the tagged fish were measured more than five hours using VR100 receiver and a directional hydrophone. The directionality of the fish movement was tested by Rayleigh's z-Test, the statistical analysis, and a statistical program SPSS. Three tagged fishes were individually released on the sea surface around the entrance to the Jinhae Bay on 10 to 24 January 2015. WC1 moved about 13.32 km with average swimming speed of 0.63 m/s for six hours. The average swimming depth and water depth of the seabed on the route of WC1 were 7.2 and 32.9 m, respectively. The movement range of WC2 and WC3 were 7.95 and 11.06 km, approximately, with average swimming speed of 0.44 and 0.58 m/s for 5.1 and 5.3 hours, respectively. The average swimming depth of WC2 and WC3 were 18.7 and 5.0 m, and the water depth on the route, 34.4 and 29.8 m, respectively. Three fishes WC1 to WC3 were shown significant directionality in the movement (p < 0.05). Movement mean angles of WC1 to WC3 were 77.7, 76.3 and $88.1^{\circ}$, respectively. There was no significant correlation between the movement direction of fish (WC1 and WC2) and the tidal currents during the experimental period (p >= 0.05). Consequently, three tagged fishes were commonly moved toward outside of the entrance and headed for eastward of the Korean Peninsula, approximately, after release. It may estimate positively that the tidal current speed may affect to the swimming speed of the Pacific cod during the spring tide than the neap tide.

• Conservation Science in Museum
• /
• v.24
• /
• pp.55-74
• /
• 2020

The Sacred Bell of Great King Seongdeok is required digital precision recording of conservation conditions because of corrosion and partial abrasion of its patterns and inscriptions. Therefore, this study performed digital documentation of the bell using four types of scanning and unmanned aerial vehicle (UAV) photogrammetry technologies, and performed the various shape analyses through image processing. The modeling results of terrestrial laser scanning and UAV photogrammetry were merged and utilized as basic material for monitoring earthquake-induced structural deformation because these techniques can construct mutual spatial relationships between the bell and its tower. Additionally, precision scanning at a resolution four to nine times higher than that of the previous study provided highly valuable information, making it possible to visualize the patterns and inscriptions of the bell. Moreover, they are well-suited as basic data for identifying surface conservation conditions. To actively apply three-dimensional scanning results to the conservation of the original bell, the time and position of any changes in shape need to be established by further scans in the short-term. If no change in shape is detected by short-term monitoring, the monitoring should continue in medium- and long-term intervals.