• Journal of the Korea Society of Computer and Information
• /
• v.14 no.8
• /
• pp.59-64
• /
• 2009

This paper is intended to study how well the routing protocol supplied in wireless mesh networks can evade interference path along the applied routing metric. Wireless mesh networks, unlike existing network techniques, has the characteristics that node movement is less and energy effect is limited. Therefore. this type of network requires path configuring technique to reflect such network characteristics and new routing metric to determine proper path. Routing metric proposed recently is designed to produce link quality accurately, but it configures path not considering the traffic situation of adjacent nodes. Thus. this technique has the problems of reduced transfer rate and delay between terminals occurring due to frequent traffic chaos by the interference of adjacent nodes. Therefore, this paper proposes metric that configures routing path by finding like metric that can transfer data effectively by considering the traffic situation of adjacent nodes. We confirmed through simulation that the proposed routing metric reduces the delay between terminals via the path that evades the traffic interference of adjacent node.

• Journal of the Society of Disaster Information
• /
• v.10 no.2
• /
• pp.254-262
• /
• 2014

KISStool is developed and established by KIGAM, in order to link and share the earthquake data easily with institutes related, this study includes the development of a KISStool program format and protocol supporting Kit. The Kit has functions such as transforming and sending a seismic data. The functions of the kit are implemented in modules, which are running on the realtime basis. The firmware is embedded into the Kit, which transforms the seismic data into the formats, miniSEED and QSCD20. These data are sent to KISStool program. We have confirmed the results of the data transforming, transmissions and storage functions are conducted normally, the speed of transmission shows same level when comparing with a standard system. We expect that the firmware developed in this study will have high usability not only for linking with KISStool program through being embedded into incompatible digitizers, but also for improving performance of older ones.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.444-448
• /
• 2005

This paper presents a developing procedure of the CAN-based real-time simulator for car body control, aiming at replacing the actual W/H (Wiring Harness) and J/B(Junction Box) couple eventually. The CAN protocol, as one kind of field-bus communication, defines the lowest 2 layers of the ISO/OSI standard, namely, the physical layer(PL) and the data link layer(DLL), for which the CSMA/NBA protocol is generally adopted. For CPU, two PIC18Fxx8x's are used because of their built-in integration of CAN controller, large internal FLASH memory (48K or 64K), and their costs. To control J/B's and actuators, 2 controller boards are separately implemented, between which CAN lines communicate through CAN transceivers MCP255. A power motor for washing windshield, 1 door lock motor, and 6 blink lamps are chosen for actuators of the simulator for the first stage. For the software architecture, a polling method is used for the fast global response time despite its slow individual response time. To improve the individual response time and to escape from some eventual trapped-function loops, High/Low ports of the CPU are simply used, which increases the stability of the actuator modules. The experimental test shows generally satisfactory results in normal transmitting / receiving function and message trace function. This simulator based on CAN shows a promising usefulness of lighter, more reliable and intelligent distributed body control approach than the conventional W/H and J/B couple. Another advantage of this approach lies in the distributed control itself, which gives better performance in hard real-time computing than centralized one, and in the ability of integrating different modules through CAN.

• Journal of KIISE
• /
• v.43 no.10
• /
• pp.1094-1103
• /
• 2016

Physical Web and Eddystone can be serviced by a single integrated application on the device by using their servers' URL. However, they have a limitation that their servers must be customized for service characteristics on a case by case basis. In other words, regardless of the service selected for BLE, it should have a modified linkage application for each device. Hence, we think that a new integrated service platform, which is able to link and support its Beacon from the central server and is also able to support its application, is needed for achieving better service quality. This platform consists of push (Broadcasting for Beacon service) parts and pull (Connection) parts to establish communication. Especially, Pull should be operated and controlled under the authorization (secure) management for safe and trustable communication. It means that BLE must have its new authorization communications protocol to protect its data as much as possible. In this paper, we propose a BLE integrated authorization protocol for a BLE device control server based on Physical Web and Eddystone.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8A
• /
• pp.858-870
• /
• 2007

TCP is popular protocol for reliable data delivery in the Internet. In recent years, wireless environments with transmission errors are becoming more common. Therefore, there is significant interest in using TCP over wireless links. Previous works have shown that, unless the protocol is modified, TCP may perform poorly on paths that include a wireless link subject to transmission errors. The reason for this is the implicit assumption in TCP that all packet losses are due to congestion which causes unnecessary reduction of transmission rate when the cause of packet losses are wireless transmission errors. In this paper, we propose a new LDA that monitors the network congestion level using ROTT. And we evaluate the performance of our scheme and compare with TCP Veno, Spike scheme with NS2(Network Simulator 2). In the result of our experiment, our scheme reduces the packet loss misclassification to maximum 55% of other schemes. And the results of another simulation show that our scheme raise its transmission rate with the fairness preserved.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.3
• /
• pp.59-64
• /
• 2023

Fire and disaster broadcasting systems are divided into analog, digital, and network-based digital public address systems, and important specifications in network-based digital public address systems are low-latency audio, high sampling rate, and multi-channel input and output. In the past, it has been widely used to the AoE method for distinguishing based on the MAC address of the data link layer. However, this method has a problem of increasing complexity and cost. This proposal is an AoIP/UDP method, which allows communication to be easily distinguished by IP address without the need for a separate redundant network, so that the network can be freely used and configured, and cost can be reduced by reducing complexity. After implementing the AoIP/UDP method, the experimental results showed that the cost was improved with the equivalent performance with 2.66ms latency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.1
• /
• pp.185-191
• /
• 2015

This paper suggest the safety class communication board in order to design the safety network of the nuclear safety class controller. The reactor protection system use the digitized networks because from analog system to digital system. The communication board shall be provided to pass the required performance and test of the safety class in the digital network used in the nuclear safety class. Communication protocol is composed of physical layer(PHY), data link layer(MAC: Medium Access Control), the application layer in the OSI 7 layer only. The data link layer data package for the cyber security has changed. CRC32 were used for data quality and the using one way communication, not requests and not responses for receiving data, does not affect the nuclear safety system. It has been designed in accordance with requirements, design, verification and procedure for the approving the nuclear safety class. For hardware verification such as electromagnetic test, aging test, inspection, burn-in test, seismic test and environmental test in was performed. FPGA firmware to verify compliance with the life-cycle of IEEE 1074 was performed by the component testing and integration testing.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.12
• /
• pp.447-454
• /
• 2016

The research on multipath routing has been studied to solve the problem of frequent path breakages due to node and link failures and to enhance data delivery reliability in wireless sensor networks. In the multipath routing, mobile sinks such as soldiers in battle fields and rescuers in disaster areas bring about new challenge for handling their mobility. The sink mobility requests new multipath construction from sources to mobile sinks according to their movement path. Since mobile sinks have continuous mobility, the existing multipath can be exploited to efficiently reconstruct to new positions of mobile sinks. However, the previous protocols do not address this issue. Thus, we proposed an efficient multipath reconstruction protocol called LGMR for mobile sinks in wireless sensor networks. The LGMR address three multipath reconstruction methods based on movement types of mobile sinks: a single hop movement-based local multipath reconstruction, a multiple hop movement-based local multipath reconstruction, and a multiple hop movement-based global multipath reconstruction. Simulation results showed that the LGMR has better performance than the previous protocol in terms of energy consumption and data delivery delay.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.2
• /
• pp.179-192
• /
• 2019

Additional frequencies are allocated in maritime digital data exchange to alleviate overload of the VHF data link. The shipborne ad-hoc network (SANET) for this frequencies was subsequently proposed, which provides various IP-based services to ships on behalf of satellite communications. In SANET, a ship should determine its own IP address to achieve IP connectivity to the shore. Accordingly, this paper proposes a SANET configuration (SANETconf) protocol as an IP configuration protocol. SANETconf propagates non-overlapping IP addresses across the network from the shore to ships. A ship obtains its IP address by exchanging Request and Response messages with its neighbors. Therefore, SANETconf eliminates the process of DAD and managing the movement of ships. Extensive simulations were performed to verify the applicability of SANETconf. Based on results, 85% of the ships can determine their own IP address within one frame. Also, SANETconf has a high resource efficiency by using 0.024 percent of resources for IP configuration.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.56-63
• /
• 2012

The WBAN technology means a short distance wireless network which provides each device interactive communication by connecting devices inside and outside of body. Standardization on the physical layer, data link layer, network layer and application layer is in progress by IEEE 802.15.6 TG BAN. Wireless body area network is usually configured in energy efficient using sensor and zigbee device due to the power limitation and the characteristics of human body. Wireless sensor network consist of sensor field and sink node. Sensor field are composed a lot of sensor node and sink node collect sensing data. Wireless sensor network has capacity of the self constitution by protocol where placed in large area without fixed position. Mobile sink node distribute energy consumption therefore network life time was increased than fixed sink node. The energy efficient is important matter in wireless body area network because energy resource was limited on sensor node. In this paper we proposed cluster topology algorithm for efficient data transmission in wireless body area network based mobile sink. The proposed algorithm show good performance under the advantage of grid routing protocol and TDMA scheduling that minimized overlap area on cluster and reduced amount of data on cluster header in error prone wireless sensor network based on mobile sink.