• 제목/요약/키워드: Data Industry

검색결과 11,744건 처리시간 0.042초

임분재적(林分材積) 측정법(測定法)의 효율적(效率的) 개선방안(改善方案)에 관(關)한 연구(研究) (Studies on the Efficient Improvement of Measurement Methods of Stand Volume)

  • 이종락;윤종화;이흥균;김장수
    • 한국산림과학회지
    • /
    • 제76권3호
    • /
    • pp.181-192
    • /
    • 1987
  • 각산정(角算定) 측정법(測定法)으로 임분재적(林分材積)을 추정(推定)할 수 있도록 하기 위하여 경기, 충남북, 강원지역 등의 소나무임분(林分)에서 표준지(標準地) 164개소(個所)를 선정(選定)하여 각(各) 조사인자별(調査因子別)로 실측(實測)하고 Plotless Sampling 방법(方法)으로 측정(測定)한 자료(資料)를 가지고 임분재적(林分材積) 조제방법(調製方法)과 Plotless Sampling 법(法)에 필요한 각종(各種) 표(表)를 조제하여 이를 종합적으로 분석검토(分析檢討)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 각산정(角算定) 측정법(測定法)에 의하여 측정(測定)이 가능(可能)한 임분평균수고(林分平均樹高), ha 당(當) 단면적(斷面積), 단면적수고(斷面積樹高)의 측정치(測定値)와 표준지(標準地)에서 측정(測定)한 실측치(實測値) 사이에는 회귀계수(回歸係數) b 가 거의 1인 Y=bx 의 회귀계수(回歸係數)가 성립(成立) 하였으며 이들 사이에는 유의차(有意差)가 없어 소나무림(林)에서 각산정(角算定) 측정법(測定法)로 임분재적(林分材積)을 추정(推定)할 수 있다. 2. Dendrometer 로 측정(測定)이 가능한 인자(因子)를 이용(利用)하여 구한, 가장 적합(適合)한 임분재적식(林分材積式)은 log V = -0.0208+0.8497 log G. H., log V = -0.0028+0.7981 log G+0.9313 log H 이며 본식(本式)에 의하여 조제된 임분재적표(林分材積表)는 Table 4, 5와 같으며 표(表)에 의한 측정치(測定値)와 실측치간(實測値間)의 추정오차율(推定誤差率)은 1변수재적표(變數材積表)가 9.16%, 2변수재적표(變數材積表)가 8.50%이었다. 3. 각산정(角算定) 측정법(測定法)에 의한 임분재적(林分材積) 추정시(堆定時) 필요(必要)한 인자(因子)인 임분형상고(林分形狀高), 형상단면적(形狀斷面積), 임분형수(林分形數) 등을 구할 수 있는 가장 적합(適合)한 추정식(推定式)은 다음과 같다. FH=D/(1.5205+0.0994 D) log FH=0.0451+0.2429 log D+0.3474 log H log FG=-0.0380+0.7758 log G-0.0066 log H F=H/(-5.1697+2.6013 H) F=FH/(-3.1256+2.7611 FH) log F=-0.0634-0.0848 log GH-0.1224 log Di 4. 이와 같은 식(式)에 의하여 조제한 임분형상고표(林分形狀高表)는 Table 7, 8과 같으며 이의 추정오차율(推定誤差率)은 임분평균직경(林分平均直徑)에 의한 1변수표(變數表)와 임분평균직경(林分平均直徑) 및 임분평균수고(林分平均樹高)에 의한 2변수표(變數表)는 각각(各各) 8.05%, 8.32%이며 단면적(斷面積)과 임분평균수고(林分平均樹高)의 2변수(變數)에 의한 형상단면적표(形狀斷面積表)는 Table 9와 같고 이의 추정오차율(推定誤差率)은 9.76%이었다. 또한 임분형수표(林分形數表)는 Table 10, 11, 과 같으며 이의 추정오차율(推定誤差率)은 임분평균수고(林分平均樹高), 임분형상고(林分形狀高)에 의한 1변수표(變數表)는 각각(各各) 5.58%, 5.39%이고 단면적(斷面績) 수고(樹高)와 수간거리(樹幹距離)에 의한 2변수표(變數表)는 4.30% 이었다.

  • PDF

포항-울산간의 점토자원의 지질과 그 물리화학적 특성에 관한 연구 (A Study on Geology of Clay Mineral Deposits of Pohang-Ulsan Area and their Physico-Chemical Properties)

  • 김옥준;이하영;김서운;김수진
    • 자원환경지질
    • /
    • 제4권4호
    • /
    • pp.167-215
    • /
    • 1971
  • I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

  • PDF

공경호원의 경호대상자 심리상태 인지 (A Study on the Psychological State of the Security Subjects of National Guard)

  • 김화수;강민완;조성구
    • 시큐리티연구
    • /
    • 제31호
    • /
    • pp.73-100
    • /
    • 2012
  • 최근 우리나라는 2012년 3월 26일부터 3일간 서울에서 진행된 2012 핵안보정상회의를 성황리에 끝마친 바 있다. 이것은 국내외 산업계 인사 및 민간기구 전문가 회의를 통하여 국제적 핵안보 증진을 이끌어 내기 위한 것이었는데, 이 행사의 준비를 위하여 가장 중요하게 다루어져야 하는 것 중 하나는 회의에 참석한 각국 정상의 경호였다. 국가정상의 경호는 국가의 명예와 국운을 좌우하는 중요한 과제로 비중 있게 다루어 져야 한다. 국가정상의 경호를 담당하는 공경호원은 성공적인 임무 수행을 위하여 경호대상자에 대하여 높은 이해력을 가지고 있어야 하는데, 이 중 중요하게 다루어져야 할 부분은 경호대상자의 심리상태 인지이다. 이 연구는 현재 공경호원이 경호대상자의 심리상태를 어떻게 인지하고 있는지를 탐색적으로 살펴보았다. 연구를 수행하기 위하여 질적 연구방법 중 하나인 심층면담기법을 사용하였으며, 전사된 자료는 비 수량 데이터 분석 프로그램인 NVivo 8을 활용하여 분석하였다. 이 연구문제의 분석을 실시한 결과 평소와의 비교 방법 39(72.2%), 세밀한 관찰 방법 15(27.7%), 언론매체를 통한인지 방법 41(73.2%), 주변인의 도움 15(26.7%)으로 범주화 되었다. 평소와의 비교방법은 공경호원이 감지하는 경호대상자의 말과 행동 그리고 표정 등에서 경호대상자의 이상심리 상태를 인지하는 것이라고, 세밀한 관찰법은 공경호원이 경호대상자의 심리상태를 인지하는데 있어 미리 철저한 사전 정보가 있어야 가능하다고 하였고 경호대상자에 대한 모든 정보를 입수한 상태에 가능하다고 말하였다. 언론매체의 보도를 통하여 인지방법은 공경호원이 언론매체의 보도를 이해하기 위해서 경호대상자의 정치 상황에 대한 이해가 선행되어야 한다고 하였고, 주변인의 도움을 통한 인지방법은 경호대상자 주변의 수행경호 근무자, 의전담당 비서관 등을 통하여 전파되어야 하고 경호기법 선택에 활용되어야 한다고 하였다.

  • PDF

양계 농업인의 작업장 환경 및 개인보호구 착용 실태조사 (A Survey on the Workplace Environment and Personal Protective Equipment of Poultry Farmers)

  • 김인수;김경란;이경숙;채혜선;김성우
    • 한국환경보건학회지
    • /
    • 제40권6호
    • /
    • pp.454-468
    • /
    • 2014
  • Objectives: This study was conducted to investigate the actual condition of the farm work environment and personal protective equipment as part of the effort to improve livestock work for the safety and health of poultry farmers and provide basic data for establishing plans to improve and develop personal protective equipment. Methods: For this purpose, a questionnaire survey on general information about stables, the poultry work environment, accidents, the wearing of work clothes and personal protective equipment, and the level of awareness related to personal protective equipment was conducted among 148 poultry farmers. Results: As a result, it was found that poultry workplace environment was exposed to such risks as fine dusts; organic dusts; poisonous gases; odorous substances; chicken excrement; contact with chickens, bacteria or viruses; and accidents related to machine operation. Thirteen percent of respondents suffered severe respiratory diseases, and the most frequently injured sites due to accidents were the hands (25.7%), knees (23.8%), arms (17.3%), and head (10.9%). The most frequent type of accident was collisions between the body and obstacles or machinery during movement (36.4%), followed by erroneous machine operation such as feeders and electric shocks (8.5%). Regarding the wearing of work clothes and personal protective equipment, 51.7% of the respondents wore worn-out clothing or everyday clothes, whereas only 32.0% wore work clothes. The percentage of farmers who wore proper protective equipment for the work environment during poultry work was 48.4%. The most frequently used type of protective equipment was boots (38.9%), followed by mask (36.7%), gloves (36.3%), appropriate work clothes (22.6%), quarantine clothes (17.6%), helmets (13.4%), and goggles (12.6%). The rate of wearing goggles was low because they were considered inconvenient and lowered work efficiency. Furthermore, they purchased everyday products available on the market for their personal protective equipment which were not appropriate for maintaining safety in an actual harmful environment and its consequent risks. As a result of the survey of the awareness level related to personal protective equipment, their levels of awareness of accidents and attitude proved to be average or higher, but the practice of wearing protective equipment and the level of knowledge and management of personal protective equipment were lower. Conclusion: This survey found that the wearing status of personal protective equipment among poultry farmers was insufficient even though they were exposed to risks. Most respondents were aware of the necessity of wearing personal protective equipment and of the potential for accidents, but they did not wear proper protective equipment. Their wearing rate was low due to a lack of knowledge about protective equipment, as well as the inconvenience of wearing it. Therefore there is a need to improve and develop specialized personal protective equipment for respiration, hands, and eyes, as well as work clothes that can protect farmers from major harmful matter that is generated in the poultry workplace. Based on the results of this investigation, we will conduct further studies on the required performance and design directions of personal protective equipment while collecting more objective data through field-oriented assessments.

다양한 다분류 SVM을 적용한 기업채권평가 (Corporate Bond Rating Using Various Multiclass Support Vector Machines)

  • 안현철;김경재
    • Asia pacific journal of information systems
    • /
    • 제19권2호
    • /
    • pp.157-178
    • /
    • 2009
  • Corporate credit rating is a very important factor in the market for corporate debt. Information concerning corporate operations is often disseminated to market participants through the changes in credit ratings that are published by professional rating agencies, such as Standard and Poor's (S&P) and Moody's Investor Service. Since these agencies generally require a large fee for the service, and the periodically provided ratings sometimes do not reflect the default risk of the company at the time, it may be advantageous for bond-market participants to be able to classify credit ratings before the agencies actually publish them. As a result, it is very important for companies (especially, financial companies) to develop a proper model of credit rating. From a technical perspective, the credit rating constitutes a typical, multiclass, classification problem because rating agencies generally have ten or more categories of ratings. For example, S&P's ratings range from AAA for the highest-quality bonds to D for the lowest-quality bonds. The professional rating agencies emphasize the importance of analysts' subjective judgments in the determination of credit ratings. However, in practice, a mathematical model that uses the financial variables of companies plays an important role in determining credit ratings, since it is convenient to apply and cost efficient. These financial variables include the ratios that represent a company's leverage status, liquidity status, and profitability status. Several statistical and artificial intelligence (AI) techniques have been applied as tools for predicting credit ratings. Among them, artificial neural networks are most prevalent in the area of finance because of their broad applicability to many business problems and their preeminent ability to adapt. However, artificial neural networks also have many defects, including the difficulty in determining the values of the control parameters and the number of processing elements in the layer as well as the risk of over-fitting. Of late, because of their robustness and high accuracy, support vector machines (SVMs) have become popular as a solution for problems with generating accurate prediction. An SVM's solution may be globally optimal because SVMs seek to minimize structural risk. On the other hand, artificial neural network models may tend to find locally optimal solutions because they seek to minimize empirical risk. In addition, no parameters need to be tuned in SVMs, barring the upper bound for non-separable cases in linear SVMs. Since SVMs were originally devised for binary classification, however they are not intrinsically geared for multiclass classifications as in credit ratings. Thus, researchers have tried to extend the original SVM to multiclass classification. Hitherto, a variety of techniques to extend standard SVMs to multiclass SVMs (MSVMs) has been proposed in the literature Only a few types of MSVM are, however, tested using prior studies that apply MSVMs to credit ratings studies. In this study, we examined six different techniques of MSVMs: (1) One-Against-One, (2) One-Against-AIL (3) DAGSVM, (4) ECOC, (5) Method of Weston and Watkins, and (6) Method of Crammer and Singer. In addition, we examined the prediction accuracy of some modified version of conventional MSVM techniques. To find the most appropriate technique of MSVMs for corporate bond rating, we applied all the techniques of MSVMs to a real-world case of credit rating in Korea. The best application is in corporate bond rating, which is the most frequently studied area of credit rating for specific debt issues or other financial obligations. For our study the research data were collected from National Information and Credit Evaluation, Inc., a major bond-rating company in Korea. The data set is comprised of the bond-ratings for the year 2002 and various financial variables for 1,295 companies from the manufacturing industry in Korea. We compared the results of these techniques with one another, and with those of traditional methods for credit ratings, such as multiple discriminant analysis (MDA), multinomial logistic regression (MLOGIT), and artificial neural networks (ANNs). As a result, we found that DAGSVM with an ordered list was the best approach for the prediction of bond rating. In addition, we found that the modified version of ECOC approach can yield higher prediction accuracy for the cases showing clear patterns.

공유경제 체제로서 컨소시엄 블록체인을 활용한 와인투자 주식플랫폼 프레임워크 (Framework of Stock Market Platform for Fine Wine Investment Using Consortium Blockchain)

  • 정윤경;하예영;이혜인;양희동
    • 지식경영연구
    • /
    • 제21권3호
    • /
    • pp.45-65
    • /
    • 2020
  • 가치가 상승하는 와인에 투자하는 것은 바람직하지만 우리나라에서는 와인 투자 자체가 생소하다. 또한, 와인시장에서의 가격책정은 소수에 의해 이루어지기 때문에 과정 자체가 비합리적이고, 정보가 위조되는 경우가 흔하다. 그러나 올바른 해결책만 있다면 와인시장은 오래 투자할수록 높은 수익을 기대할 수 있다는 점에서 바람직한 투자처가 될 수 있다. 또한, 국내 와인수입량의 꾸준한 증가추세를 통한 국내 와인 소비시장의 확대 또한 기대된다. 본 연구는 앞서 말한 우리나라의 와인 투자 시장의 '올바른 해결책'으로 와인시장 활성화 및 투명성 제고를 위한 컨소시엄 블록체인 프레임워크를 제시한다. 블록체인 거버넌스는 바람직한 의사결정권과 책임성을 보장하기 때문에 와인시장의 단점을 보완해줄 수 있다. 블록체인에 저장된 데이터는 소비자가 모두 확인할 수 있기 때문에 위조와인의 등장 가능성을 낮추고 불합리적으로 가격이 책정되는 과정을 보완한다. 또한 자산의 디지털화로 낮은 현금유동성을 해결하며 스마트 컨트랙트를 통해 공급망 전반의 비용과 시간을 절약하게 되어 와인투자의 진입장벽이 낮아진다. 특히 컨소시엄 블록체인을 통해 블록체인의 거버넌스를 '샤또-유통업자-투자자'로 구성한다면 바람직한 와인 시장을 형성할 수 있다. 생산과정을 블록체인에 저장하여 생산비용을 확보하고 합리적인 출시가를 정하며 유통과정을 블록체인에 저장하여 물류시스템을 효율적으로 운영하고 선물거래 주문량을 예측한다. 마지막으로 투자자들은 이 모든 데이터를 열람함으로써 합리적인 의사결정을 한다. 이는 와인경매시장에 있어서 주요 이해관계자들간의 지식공유체제로서 작동할 수 있는 가능성을 제시하고 있다. 해당 연구에서는 소유권을 주식처럼 다룰 수 있다는 점에서 대체투자의 새로운 관점을 제시했다. 또한 정보의 투명성을 제고시킬 방안으로써 와인 소유 매매 프레임워크를 제시하였고 식품 수입절차의 간소화와 와인 업계 내 신뢰 형성을 가능하게 했다. 해당 프레임워크를 통해 와인 관련 정보들을 투명하게 기록함으로써 활발한 와인투자가 이루어질 수 있을 것이며 이는 지식경영 측면에서 큰 의의를 가진다. 향후 연구에서는 해당 프레임워크를 확장해 적용할 분야를 연구하고자 한다.

한국 환경산업혁신체제의 혁신성과에 대한 영향 분석 (An Analysis of the Influence of Korean Environmental Sectoral System of Innovation on Innovative Performances)

  • 류재호;김근우;박중구
    • 에너지공학
    • /
    • 제29권1호
    • /
    • pp.85-99
    • /
    • 2020
  • 본 논문은 한국의 환경기업을 대상으로 산업혁신체제(Sectoral System of Innovation, SSI)를 구성하는 기술체제·시장수요·네트워크·제도 등의 요소가 제품·공정·조직·마케팅·환경 등의 혁신성과에 미치는 영향을 분석한다. 이를 위해 한국 환경기업을 대상으로 설문조사를 실시하였으며, 201개 기업의 응답자료를 대상으로 다중회귀분석을 실시하였다. 분석의 결과, ① 한국 환경기업의 제품혁신은 환경SSI 요소 중 내부기술축적과 시장수요 대응정도 등에 의해서 긍정적인 영향을 받고 있는 반면, 외부지식활용, 시장경쟁, 시장주체 간과 비시장주체 간 네트워크, 정부지원과 규제 등에 의해서는 영향을 받지 않는 것으로 나타났다. ② 공정혁신은 내부기술축적, 비시장주체 간 네트워크, 규제 등에 의해서 긍정적인 영향을 받고 있으나, 외부지식활용, 시장수요 대응정도, 시장경쟁, 시장주체 간 네트워크, 정부지원 등에 의해서는 영향을 받지 않는 것으로 나타났다. ③ 조직혁신은 내부기술축적, 외부지식활용, 규제 등에 의해서 긍정적인 영향을 받고 있는 반면, 시장수요 대응정도, 시장경쟁, 시장주체 간 및 비시장주체 간 네트워크, 정부지원 등에 의해서는 영향을 받지 않는 것으로 나타났다. ④ 마케팅혁신은 내부기술축적, 비시장주체 간 네트워크, 정부지원 등에 의해서 긍정적인 영향을 받고 있는 반면, 외부지식활용, 시장수요 대응정도, 시장경쟁, 시장주체 간 네트워크, 규제 등에 의해서는 영향을 받지 않는 것으로 나타났다. 마지막으로, ⑤ 환경혁신은 외부지식활용과 규제 등에 의해서 긍정적인 영향을 받고 있으나, 시장경쟁에 의해서는 부정적인 영향을 받고 있으며, 내부기술축적, 시장수요 대응정도, 시장주체 간 및 비시장주체 간 네트워크, 정부지원 등에 의해서는 영향을 받지 않는 것으로 나타났다. 이러한 분석결과에 대응한 정책적 시사점으로는 ① 시장측면에서 융·복합 기술적용과 새로운 규제 도입 등을 통해 창출되는 시장을 개척하여 내수를 확대하는 한편, 해외시장 개척을 지원할 필요가 있다. ② 수요연계형 공동연구개발 등 환경시장주체 간 생태계 구축을 활성화할 필요가 있다. ③ 정부의 정책이 규제 외에 지원을 더욱 강화할 필요가 있다. 본 논문은 기업의 실질통계 확보가 어려워 설문조사를 활용한 분석이라는 점에서 한계가 있으며, 향후 환경SSI 요소들 간의 상호영향관계를 분석하는 추가적인 연구가 필요하다.

KODISA 연구윤리의 표절 판단기준과 글로벌 학술지 가이드라인 (The Standard of Judgement on Plagiarism in Research Ethics and the Guideline of Global Journals for KODISA)

  • 황희중;김동호;윤명길;이정완;이종호
    • 유통과학연구
    • /
    • 제12권6호
    • /
    • pp.15-20
    • /
    • 2014
  • Purpose - In general, researchers try to abide by the code of research ethics, but many of them are not fully aware of plagiarism, unintentionally committing the research misconduct when they write a research paper. This research aims to introduce researchers a clear and easy guideline at a conference, which helps researchers avoid accidental plagiarism by addressing the issue. This research is expected to contribute building a climate and encouraging creative research among scholars. Research design, data, methodology & Results - Plagiarism is considered a sort of research misconduct along with fabrication and falsification. It is defined as an improper usage of another author's ideas, language, process, or results without giving appropriate credit. Plagiarism has nothing to do with examining the truth or accessing value of research data, process, or results. Plagiarism is determined based on whether a research corresponds to widely-used research ethics, containing proper citations. Within academia, plagiarism goes beyond the legal boundary, encompassing any kind of intentional wrongful appropriation of a research, which was created by another researchers. In summary, the definition of plagiarism is to steal other people's creative idea, research model, hypotheses, methods, definition, variables, images, tables and graphs, and use them without reasonable attribution to their true sources. There are various types of plagiarism. Some people assort plagiarism into idea plagiarism, text plagiarism, mosaic plagiarism, and idea distortion. Others view that plagiarism includes uncredited usage of another person's work without appropriate citations, self-plagiarism (using a part of a researcher's own previous research without proper citations), duplicate publication (publishing a researcher's own previous work with a different title), unethical citation (using quoted parts of another person's research without proper citations as if the parts are being cited by the current author). When an author wants to cite a part that was previously drawn from another source the author is supposed to reveal that the part is re-cited. If it is hard to state all the sources the author is allowed to mention the original source only. Today, various disciplines are developing their own measures to address these plagiarism issues, especially duplicate publications, by requiring researchers to clearly reveal true sources when they refer to any other research. Conclusions - Research misconducts including plagiarism have broad and unclear boundaries which allow ambiguous definitions and diverse interpretations. It seems difficult for researchers to have clear understandings of ways to avoid plagiarism and how to cite other's works properly. However, if guidelines are developed to detect and avoid plagiarism considering characteristics of each discipline (For example, social science and natural sciences might be able to have different standards on plagiarism.) and shared among researchers they will likely have a consensus and understanding regarding the issue. Particularly, since duplicate publications has frequently appeared more than plagiarism, academic institutions will need to provide pre-warning and screening in evaluation processes in order to reduce mistakes of researchers and to prevent duplicate publications. What is critical for researchers is to clearly reveal the true sources based on the common citation rules and to only borrow necessary amounts of others' research.

설비공학 분야의 최근 연구 동향: 2014년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research: A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2014)

  • 이대영;김사량;김현정;김동선;박준석;임병찬
    • 설비공학논문집
    • /
    • 제27권7호
    • /
    • pp.380-394
    • /
    • 2015
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

영유아의 예방접종 및 그 관련요인 (Up-to-date or Complete Immunization Coverage and Their Related Factors)

  • 이무식;김은영;김건엽;이진용;장민영;홍지영
    • 농촌의학ㆍ지역보건
    • /
    • 제37권4호
    • /
    • pp.233-245
    • /
    • 2012
  • 이 연구는 지역단위 예방접종률 시범조사를 통해 획득한 다양한 예방접종 자료를 분석하여 예방접종의 수진 관련 요인을 파악, 분석하였다. 2005년 2월부터 4월까지 일개 도농복합 지역사회 영유아 전수를 대상으로 해당 연령의 영유아들이 거주하는 가구를 조사자가 직접 방문하여 보호자를 대상으로 설문조사하였으며, 접종조사력에 대한 확인은 예방접종수첩자료를 우선적으로 하고, 없을 시에는 보호자의 기억력에 의존하여 조사하였다. 또한 2005년 5월부터 7월까지 지역 가구조사에서 확인된 예방접종 의료 기관을 대상으로 예방 접종력 확인 조사를 실시하였는데, 논산 및 대전지역 병의원에 대해서는 조사자가 직접 방문하였고, 타지역의 경우 우편 설문조사를 시행하였다. 예방접종수첩에 근거한 국가필수예방접종률은 DTaP 4차(79.3%)를 제외하고 92.7~96.4%였으며, 국가예방접종 완전접종률은 74.0%, 4:3:1 시리즈 완전접종률은 77.1%였다. 국가필수예방접종의 완전접종은 주 양육자가 부모인 경우(19개월 이상 영유아에서 교차비 0.59, 95% 신뢰구간 0.39-0.87), 출생순위가 셋째 이상에 비해 빠를수록(24개월 이상 영유아에서 교차비 1.79, 95% 신뢰구간 1.05-3.03) 접종률이 유의하게 높았다. 4:3:1 시리즈 완전접종은 19개월 이상 영유아에서 주양육자가 부모인 경우(교차비 0.58, 95% 신뢰구간 0.38-0.88), 출생순위가 첫째아일수록(교차비 1.94, 95% 신뢰구간 1.21-3.14) 접종률이 높았으며, 24개월 이상 영유아에서는 출생순위가 첫째아에서(교차비 2.23, 95% 신뢰구간 1.27-3.91) 유의하게 높았다. 90% 미만의 예방접종률을 보인 부적절한 수준의 예방접종에 대한 대책이 필요하며, 완전접종률을 높이기 위해서는 양육하는 부모의 존재와 출생순위 파악과 이에 대한 중재대책이 필요할 것이다.