• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2015년도 학술발표회
• /
• pp.521-521
• /
• 2015

This study evaluated the gap filler radar as an implementation of the 1.5 km CAPPI data in Korea. The use of the 1.5 km CAPPI data was an inevitable choice, given the topography of the Korean Peninsula and the location of the radar. However, there still exists a significant portion of beam blockage, and thus there has been debate about the need to introduce the gap filler radar (or, the gap-filler). This study evaluated the possible benefits of introducing gap-fillers over the Korean Peninsula. As a first step, the error of the radar data was quantified by the G/R ratio and RMSE, and the radar data over the Korean Peninsula were evaluated. Then, the gap-fillers were located where the error was high, whose effect was then evaluated by the decrease in the G/R ratio and RMSE. The results show that the mean values of the G/R ratio and RMSE of the 1.5 m CAPPI data over the Korean Peninsula were estimated to be about 2.5 and 4.5 mm/hr, respectively. Even after the mean-field bias correction, the RMSE of the 1.5 km CAPPI data has not decreased much to be remained very high around 4.4 mm/hr. Unfortunately, the effect of the gap-filler on the 1.5 CAPPI data was also found very small, just 1 - 2%. However, the gap-filler could be beneficial, if the lowest elevation angle data were used instead of the 1.5 km CAPPI data. The effect of five gap-fillers could be up to 7% decrease in RMSE.

• 한국정밀공학회지
• /
• 제16권4호통권97호
• /
• pp.37-45
• /
• 1999

Many automated welding equipment are used in the industry. However, there are some problems to get quality welds because of the geometric error, thermal distortion, and incorrect joint fit-up. These factors can make the gap between base plates in case of a thick plate welding. The welding product with the quality welds can not be obtained without consideration of the gap. In this paper, the robot path and welding conditions are modified to get the quality weld by detecting the position and size of the gap. In this work, a low-priced laser range sensor is used. The 3-dimensional information is obtained using the motion of a robot, which holds a laser range sensor. The position and size of the gap is calculated using signal processing of the measured 3-dimensional information of joint profile geometry. The data measured by a laser range sensor is segmented by an iterative end point method. The segmented data is optimized by the least square method. The existence of gap is detected by comparing the data with the segmented shape of template. The effects of robot measuring speed and gap size are also tested. The recognizability fo the gap is verified as good by comparing the real joint profile and the calculated joint profile using the signal processing.

• 정보저장시스템학회논문집
• /
• 제3권1호
• /
• pp.1-4
• /
• 2007

A high density optical data storage device has been required for many years. In the field of the optical data storage, a near-field recording (NFR) technology is considered as a next generation one for achieving the high data density. Due to an evanescent wave effect occurred under 100nm distance which is the excessively small distance between the SIL and the disc, the most significant and difficult problem in this technology is to maintain a gap between a solid immersion lens (SIL) and a disc. Also, maintaining the gap under at least 50nm is required in the NFR gap servo system to use the evanescent wave effect efficiently. There are some institutes that have shown the novel gap servo control. In general, they use a mode switching servo method which consists of approach, hand-over and gap control mode. However there is a critical problem such as an overshoot at the tuning point from the approach mode to the hand-over mode, which may cause a collision between the SIL and the disc. In this paper, we show our NFR system and an improved gap servo system using an exponential function as the approach mode which can reduce the overshoot.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1545-1546
• /
• 2008

In this study, an image processing method with FRANSAC(Fuzzy RANSAC) is presented and discussed for the development of a microscopic gap measuring algorithm. Many problems in edge detection processing are mainly occurred by the illumination system. A serious problem is that the edge set of gap could include the error elements that have relatively larger error than normal. This problem leads to a incorrect measurement of gap. We present a gap measuring algorithm using FRANSAC[1] that is a representative robust estimation algorithm. FRANSAC is peformed by first categorizing all data into good sample set, bad sample set and vague sample set using a fuzzy classification and then sampling in only good sample set. Experimental results show that the presented gap measuring algorithm gives a higher accurate value of gap especially for the more noisy image data.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권5호
• /
• pp.358-365
• /
• 2016

We propose a novel application of random forest, a machine learning-based general classification algorithm, to analyze the influence of design attributes on the silicon-to-SPICE (S2S) gap. To improve modeling accuracy, we introduce magnification of learning data as well as randomization for the counting of design attributes to be used for each tree in the forest. From the automatically generated decision trees, we can extract the so-called importance and impact indices, which identify the most significant design attributes determining the S2S gap. We apply the proposed method to actual silicon data, and observe that the identified design attributes show a clear trend in the S2S gap. We finally unveil 10nm key fin-shaped field effect transistor (FinFET) structures that result in a large S2S gap using the measurement data from 10nm test vehicles specialized for model-hardware correlation.

• Journal of Evidence-Based Herbal Medicine
• /
• 제1권1호
• /
• pp.19-28
• /
• 2008

Consumers have been requiring more higher level of food and agricultural products safety. The system of Good Agricultural Practice(GAP) has been spreaded over the world. Korea also introduced the GAP system in agricultural industry. GAP is related to the production side in the whole traceability system. The establishment of GAP system is a prerequisite to secure food safety. This study reviewed the concept of GAP and necessities and backgrounds of introducing the GAP system. Also, this study analyzed the problems which have been appeared in the GAP program and proposed the policy strategies and directions for the Korean GAP system. So issues for the GAP system are as follows; computerizing of traceability system, forming the cooperative works among the related governmental departments, establishing a certification system to relate with crop features, efficient management, ensuring distribution channel and the research for estimating GAP consumer surplus is need to analyze GAP program more efficient. In addition, It is necessary to keep the records of the data to analyze the GAP program more accurately.

• 정보교육학회논문지
• /
• 제25권6호
• /
• pp.1005-1013
• /
• 2021

코로나 19가 장기화되면서 기존 학력 격차가 더욱 심화되고 있다. 본 연구의 목적은 담임교사에게 학업 성취도 분석을 통해 학년 및 학급 내 학력 격차 실태를 시각적으로 확인하고, 이를 활용하여 학력 격차를 개선하기 위한 수업 설계 및 방안 탐색에 도움을 주기 위함이다. 학생들의 학년 초 국어, 수학 진단평가 점수 데이터를 K-means 알고리즘을 활용하여 클러스터로 시각화하였으며, 그 결과 유의미한 군집이 형성된 것을 확인했다. 또한, 교사 인터뷰 결과를 통해서 학생의 학습 수준 및 학업 성취 확인, 개별 보충지도 및 수준별 학습과 같은 수업 설계 등 학력 격차 개선에 본 시스템이 유의미한 것으로 확인되었다. 이는 곧, 학업 성취도 데이터 분석 시스템이 학력 격차 개선에 도움이 된다는 것을 의미한다. 본 연구가 담임교사에게 학년 및 학급 내 학력 격차 개선 방안을 탐색하는 데에 실질적인 도움을 제공하며, 궁극적으로 학력 격차 개선에 기여하기를 기대한다.

• Journal of the Korean Data and Information Science Society
• /
• 제19권3호
• /
• pp.893-901
• /
• 2008

The disconfirmation paradigm is the earliest researched and the most deeply researched of all the paradigms in marketing. Disconfirmation paradigm deals with the influence of expectation, perceived product performance, and the discord between the two on consumer satisfaction. The GAP-Model is based on the disconfirmation paradigm that tries to understand the effect of the gap between before purchase expectations and after purchase perceptions of the product performance on dependent variables such as customer satisfaction. The purpose of this research is to test whether regression coefficients of a P-Model(performance only model), an E-Model(expectation only model) and GAP(P-E)-Model are equivalent in explaining service value and loyalty. The Chow's F-Test is used to test the excellence of the 3 models. As a result of comparison and analysis, P-Model showed more excellence of service value and loyalty than E-Model or GAP-Model.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권3호
• /
• pp.168-174
• /
• 2004

On-line monitoring system(OMS) has been developed for the pumped storage generator/motor The OMS is applied to diagnosis of the PD(partial discharge) activity of stator insulation, the shorted-turn of rotor winding and the variation of the air-gap between stator and rotor. The OMS consists of DAS(data acquisition system), main server system, gateway and display PC. The DAS measures the PD, the shorted-turn and air-gap from three sensors installed on the generator/motor. The gateway controls the data which sent by DAS. The main server system saves the data, analyzes the data and conducts the diagnostic algorithm. The display PC shows the diagnostic results of partial discharge, shorted-turn and air-gap. Field tests were conducted using PDA(partial discharge analyzer). The results of the OMS and PDA measurements can be directly correlated with normalized quantity number(NQN), PD magnitude(Qm) and PD pattern.

• International Journal of Computer Science & Network Security
• /
• 제21권9호
• /
• pp.261-266
• /
• 2021

The spread of cloud computing, digital computing, and the popular social media platforms have led to increased growth of data. That growth of data results in what is known as big data (BD), which seen as one of the most strategic resources. The analysis of these BD has allowed generating value from massive raw data that helps in making effective decisions and providing quality of service. With Vision 2030, Saudi Arabia seeks to invest in BD technologies, but many challenges and barriers have led to delays in adopting BD. This research paper aims to search in the state of Big Data Analytics (BDA) in Saudi higher education sector, identify the barriers by reviewing the literature, and then to apply the design-reality gap model to assess these barriers that prevent effective use of big data and highlights priority areas for action to accelerate the application of BD to comply with Vision 2030.