• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.633-636
• /
• 1986

We have developed an automated ECG interpretation technique by micro-computer for rapid analysis of ECG data in the clinical hospital. This system is consisted of 16 bit microcomputer including bandpass-filter, comparator, A/D converter in order to obtain the QRS width, R-R interval.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.795-796
• /
• 2007

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.314-317
• /
• 2012

최근 차량의 멀티미디어 장치들이 증가하면서 이 장치들을 광 네트워크로 연결하여 멀티미디어 데이터를 송 수신해서 사용할 수 있는 MOST(Media Oriented Systems Transport) 네트워크를 적용한 차량들이 늘어나고 있다. MOST 네트워크는 최근 자동차 멀티미디어 시스템에 넓게 사용되고 있는 통신 시스템으로서, 동기 및 비동기 데이터를 동시에 전송할 수 있고, 최근에는 150Mbps를 전송할 수 있는 MOST150 네트워크를 이용한 연구가 활발히 진행되고 있다. 본 논문에서는 MOST150 네트워크에서 Audio 데이터 입출력을 제어하기 위한 알고리즘을 설계 및 구현하였다. Audio 데이터를 제어하는 방식은 ADC(Analog to Digital Converter)를 통해 Audio 데이터가 들어오면 IOC(IO Companion)를 통해 INIC으로 Audio데이터를 전달한다. INIC은 MOST150 네트워크로 데이터를 전송하고 그렇게 보내진 Audio 데이터를 MOST150 네트워크 내부의 다른 장치에서 INIC을 통해 데이터를 수신하여 DAC(Digital to Analog Converter)를 통해 Audio 장치에서 소리가 나는 것을 테스트하여 정상적으로 동작함을 확인하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.4
• /
• pp.513-528
• /
• 2013

A floating Oscillating Water Column (OWC) wave energy converter, a Backward Bent Duct Buoy (BBDB), was simulated using a state-of-the-art, two-dimensional, fully-nonlinear Numerical Wave Tank (NWT) technique. The hydrodynamic performance of the floating OWC device was evaluated in the time domain. The acceleration potential method, with a full-updated kernel matrix calculation associated with a mode decomposition scheme, was implemented to obtain accurate estimates of the hydrodynamic force and displacement of a freely floating BBDB. The developed NWT was based on the potential theory and the boundary element method with constant panels on the boundaries. The mixed Eulerian-Lagrangian (MEL) approach was employed to capture the nonlinear free surfaces inside the chamber that interacted with a pneumatic pressure, induced by the time-varying airflow velocity at the air duct. A special viscous damping was applied to the chamber free surface to represent the viscous energy loss due to the BBDB's shape and motions. The viscous damping coefficient was properly selected using a comparison of the experimental data. The calculated surface elevation, inside and outside the chamber, with a tuned viscous damping correlated reasonably well with the experimental data for various incident wave conditions. The conservation of the total wave energy in the computational domain was confirmed over the entire range of wave frequencies.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.335-341
• /
• 2004

HTML that is language that web technology is center expression these day that use of internet and quantity of information by fast development increase rapidly brought limit to use information of web and XML that express meaning or corelation of data itself in W3C by standard for free document transmission and exchange in World Wide Web by the alternative as long as is deviation appeared. There is many efforts to use storing this XML document in RDBMS but to relation style DB because XML document is tree structure structurally data SQL and perfect disaster caused by things that is language to ask a question accomplish. In this paper XML document XML informations that is stored to RDBMS via Parsing and DOM tree process SQL quality through converter called XQuery2SQL of by change and embody XQuery2SQL conversion algorithm that draw information in RDBMS.

• Journal of Sensor Science and Technology
• /
• v.24 no.3
• /
• pp.169-174
• /
• 2015

In this study, we developed a system to detect the various defects in the metallic objects using the phenomenon that the defects cause the changes of the natural resonant frequencies. Our system consists of a FFT Amp, an Auto Impact Hammer, a Hammer controller and a PC. Auto Impact Hammer creates vibrations in the metallic objects when tapped on the surface. These vibrational signals are converted to the voltage signals by an acceleration sensor attached to the metallic part surface. These analog voltage signals were fed into an ADC (analog-digital converter) and an FFT (fast fourier transform) conversion in the FFT Amp to obtain the digital data in the frequency domain. Labview graphical program was used to process the digital data from th FFT amp to display the spectrum. We compared those spectra with the standard spectrum to find the shifts in the resonant frequencies of the metal parts, and thus detecting the defects. We used PCB's acceleration sensor and TI's TMS320F28335 DSP (digital signal processor) to obtain the resolution of 2.93 Hz and to analyze the frequencies up to 44 kHz.

• Journal of Radiation Protection and Research
• /
• v.12 no.1
• /
• pp.12-25
• /
• 1987

A basic multichannel analyser (MCA) system have been designed and constructed with the successive approximation type ADC (Analog to Digital Converter). Linear Gate, window, and palse stretcher consist of mainly linear and logic IC's, and are properly combined together to achieve short dead time and good linearity of the system. ADC 1211 (analysing time: $120{\mu}sec$) and S-RAM (static random acess memory) 6264 are used in ADC module. Two 6264 memories are connected in parallel in order to-provide enough counting capacity ($2^{16}-1$). Interfaced microcomputer Apple II controls this system and analizes the counted data. The system is tested by input pulses between 0V to 10V from oscillator.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.942-946
• /
• 2009

A scan order converter has to be placed before the JPEG encoder to provide $8{\times}8$ blocks from the pixels in raster scan order. Recently a hardware architecture has been proposed to implement a scan converter based on the single line memory. Since both read and write accesses happen at each cycle, however, the largest part of the entire power budget is occupied by the SRAM itself. In this paper, the data packing and unpacking procedure is inserted in the processing chain, such that the access frequency to the SRAM is reduced to 1/8 by adopting a packed larger data unit. The simulation results show that the resultant power consumption is reduced down to 16% for the SXGA resolution.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.6 no.1
• /
• pp.10-16
• /
• 2009

Automatic power transmission systems consisted of a torque converter and several planetary gear sets, clutches and brakes are controlled by a hydraulic shift control circuit and an electronic transmission control unit. The hydraulic circuit serves for the operation of the torque converter and lubrication oil supply of the transmission system as well as for the actuation of clutches for the automatic gear shift. The complicated hydraulic control circuit constructed by many spools, solenoids, orifices and flow passages are integrated into one small valve block and it is powered by one hydraulic pump. In this paper, a test equipment was developed to measure the oil consumption of each component at various wide operating conditions. Test data about 730 sets acquired from five test items are analyzed and discussed on the oil capacity of the circuit.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.4
• /
• pp.186-191
• /
• 2012

DC Bus Electrolytic capacitors have been widely used in power conversion system because they can achieve high capacitance and voltage ratings with volumetric efficiency and low cost. This type of capacitors have been traditionally used for filtering, voltage smoothing, by-pass and other many applications in power conversion circuits requiring a cost effective and volumetric efficiency components. Unfortunately, electrolytic capacitors are some of the weakest components in power electronic converter. Many papers have proposed different methods or algorithms to determinate the ESR and/or capacitance C for fault diagnosis of the electrolytic capacitor. However, both ESR and C vary with frequency and temperature. Accurate knowledge of both values at the capacitors operating conditions is essential to achieve the best reference data of fault judgement. According to parameter analysis, the capacitance increases with temperature and the ESR decreases. Higher frequencies make the ESR and C to decrease. Analysis results show that the proposed electrolytic capacitor parameter estimation technique can be applied to reference signal of capacitor diagnosis systems successfully.