• Journal of Biosystems Engineering
• /
• v.12 no.3
• /
• pp.7-16
• /
• 1987

This study was carried out to develop a microcomputer-based data acquisition and control system which was able to collect the data of engine performance test automatically and control the speed and load of the engine. The results of the study are summarized as follows: 1. The signal processing devices, which were able to measure cylinder pressure, coolant temperature, compositions of exhaust gas, fuel consumption, engine rpm and torque etc., were developed. The results of calibration showed that all of devices had high accuracy ranging from 0.3% to 0.69% respectively. 2. The PIA (peripheral interface adapter) for interfacing digital signal and PTM (programmable timer module) for displaying real time every 0.0408 sec were designed and developed. 3. An engine-speed control system using a stepping motor and driver was developed. The control system had the stability, and faster settling time than the manual control system. 4. The automatic control system of electrical dynamometer, which was able to control the speed and load of dynamometer, was developed with a SSD (shackleton system driver) and D/A converter. 5. The computer programs, which were able to collect and process the data of engine tests, were developed using both the machine language and BASIC.

• Nuclear Engineering and Technology
• /
• v.54 no.10
• /
• pp.3587-3594
• /
• 2022

A distributed high-speed data acquisition and monitoring system for the RF negative ion source at Huazhong University of Science and Technology (HUST) is developed, which consists of data acquisition, data forwarding and data processing. Firstly, the data acquisition modules sample physical signals at high speed and upload the sampling data with corresponding absolute-time labels over UDP, which builds the time correlation among different signals. And a special data packet format is proposed for the data upload, which is convenient for packing or parsing a fixed-length packet, especially when the span of the time labels in a packet crosses an absolute second. The data forwarding modules then receive the UDP messages and distribute their data packets to the real-time display module and the data storage modules by PUB/SUB-pattern message queue of ZeroMQ. As for the data storage, a scheme combining the file server and MySQL database is adopted to increase the storage rate and facilitate the data query. The test results show that the loss rate of the data packets is within the range of 0-5% and the storage rate is higher than 20 Mbps, both acceptable for the HUST RF negative ion source.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.2
• /
• pp.10-17
• /
• 2009

Transillumination system used by radiation is widely applied to industrial imaging system. In this study, the linear detector array constructed with scintillator and pin diode, and a multi-channel data acquisition system was developed for precision inspection of end-milling. The detector module consists of $16-CdWO_4$crystal scintillator and photodiode array. The detector and data acquisition system was applied to precision inspection of end-mill and the images of the end-mill were successfully reconstructed. The total system can analyze the Detector Quantum Efficiency(DQE) of each system. The performance of developed photodiodes equipment was compared with each other for different crystal geometry and its characteristics. Finally fine details of the end-mill phantom were constructed for industrial application. The image acquired contains several objects on a real time data transfer and the linear X-ray scanning system can be applied to many fields of a industry.

• Journal of Power Electronics
• /
• v.12 no.5
• /
• pp.813-820
• /
• 2012

This paper presents the development of a software supported acquisition system for metrological verification and testing of the equipment for monitoring and analysis of the basic electrical power quality parameters. The described procedure consists of two functionally connected segments. The first segment involves generation of the reference three-phase voltage signals, including the possibility of simulation of the various power quality disturbances, typical for electrical power distribution networks. The second part of this procedure includes the real-time recording of power quality disturbances in three-phase distribution networks. The procedure is functionally supported by the virtual instrumentation concept, including a software application developed in LabVIEW environment and data acquisition boards NI 6713 and NI 9215A. The software support of this system performs graphical presentation of the previously generated and recorded signal waveforms. A number of the control functions and buttons, implemented on the virtual instrument front panels, are provided to adjust the basic signal acquisition, generation and recording parameters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.270-273
• /
• 2006

This paper presents a gas turbine data acquisition and monitoring system using a LabVIEW programming. The developed real-time monitoring system entitled a C-Tune DAS plays an important role to make an analysis of the real-time operation of the gas turbine under maintenance. The LabVIEW based software is divided into three parts according to their original functions; Data acquisition, Data analysis and display, and Data storage. The data acquisition part receives data from a PMS (Plant Management System) server and two cFPs (Compact-Field Point). To verify the validity of the developed system, it is applied to gas turbines in the combined cycle power plant in Korea.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.761-764
• /
• 2001

A conceptual design of marine environmental information system(MEIS) for vessels running in the ocean was carried out. MEIS consists of a remote acquisition system of raw environmental data, a physical and numerical processing system of acquired raw data, and a supporting satellite communication system for data transfer. The efficiency of a remote acquisition system depends on the amount of acquired data and its real-time accessibility, while the efficiency of a data processing system is governed by the flexibility and accuracy of data analysis tools.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1260-1262
• /
• 1996

There has been much interested on the issues of designing and implementing the data acquisition and display system. This paper describes how to acquire and manage the data to be generated from sensor sources in a manufacturing process. The functionality of this data management system is composed of data acquisition, database management, processing and display of the available data. Also, this system has a adaptability to be carried throughout configuration management.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.329-333
• /
• 2008

As construction projects become getting bigger and complicated, the importance of resource management in construction sites is to be emphasized all the more than ever, but the reality is now gone far away leaving data filing and management dependent on the hands of in-field managers, which gives rise to a variety of problems such as decreased productivity. The manually-dependent data management makes it hard to acquire data and information needed for projects both quickly and correctly with abundant cost and endeavor by accumulating the related data, and efficient project management, being exemplified by such practical applications as Bar-code, RFID(Radio Frequency Identification), GPS(Global Positioning System), PDA(Personal Digital Assistants), USN(Ubiquitous Sensor Network) and DAT(Data Acquisition Technology). In this context literature survey is made theoretically, taken into account 14 classification of construction works, 31 types of work classification in CIS, Masterformat as follows;

• Journal of information and communication convergence engineering
• /
• v.13 no.2
• /
• pp.97-104
• /
• 2015

In this paper, we propose a data envelopment analysis (DEA) and analytic hierarchy process (AHP) integrated model to improve the selection process in the acquisition of a weapon system which is the key component to the success of the project. In particular, we applied DEA in the first stage to choose a frontier group among the candidates in the selection process of the next-generation fighter system (the 3rd FX) in Korea. Then, by using the Delphi technique, we surveyed military experts and applied AHP to determine the best choice among the candidates. The results of the study match the actual decision made by the Korean government in the weapon system acquisition. The results of the proposed DEA-AHP integrated method in the selection of the next-generation fighter systems in Korea demonstrate the usefulness of the method. In this paper, we also discuss the future implications of the proposed model.

• Journal of the Ergonomics Society of Korea
• /
• v.7 no.1
• /
• pp.45-52
• /
• 1988

An instrumentation system for the automatic measurement of body sway has been developed. The system consists of a force platform, amplifiers, and data acquisition and display software, operating on a computer. We used only the force platform and electronic amplifying unit in Kistler Biomechanics System to obtain precise measurements, and developed the data acquisition and analysis software using an IBM PC With 12 bit A/D converter. The system can be used in various specialized disciplines, such as ergonomics, rehabilitation, neuromuscular control, as well as sprots biomechanics.