• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(I)
• /
• pp.210-215
• /
• 2003

Korean High Speed Train (KHST) has been tested on high speed line in JungBu site since it was developed in 2002. The KHST figured 7 cars was modeled for dynamic simulation with Vampire program. and the data acquisition system was used to test successfully the on-line test for proving the dynamic performance of KHST. The comparison between test and simulation results for dynamic behavior of KHST was tried in this paper and it was very difficult because the environmental conditions and running conditions have an effect on the test results and these conditions are unable to be modeled for dynamic analysis. Also the parameters for data acquisition system for test are usually not same to simulation conditions. Therefor, in this paper the acceleration data after filtering with low pass filter below 1Hz were used to compare between test and simulation results because the low frequency range is useful to evaluate the dynamic performance for railway vehicle system, so as steady state curving acceleration. The results show that both are similar in low frequency range.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2012년도 춘계학술발표대회
• /
• pp.961-963
• /
• 2012

The sound source localization system is used to some area such as robotic system, object localization system, guarding system and medicine. So time delay estimation and angle estimation of sound direction are studied until now. These days time delay estimation is described in LabVIEW which is used to create innovative computer-based product and deploy measurement and control systems. In this paper, the development of signal monitoring platform is presented for sound source localization. This platform is designed in virtual instrument program and implemented in two stages. In first stage, data acquisition system is proposed and designed to analyze time delay estimation using cross correlation. In second stage, data obtaining system which is applied and designed to monitor analog signal processing is proposed.

• Current Optics and Photonics
• /
• 제7권6호
• /
• pp.683-691
• /
• 2023

A typical terahertz time-domain spectroscopy system requires large, expensive, and heavy hardware such as a lock-in amplifier and a function generator. In this study, we replaced the lock-in amplifier and the function generator with a single sound card built into a typical desktop computer to significantly reduce the system size, weight, and cost. The sound card serves two purposes: 1 kHz chopping signal generation and raw data acquisition. A unique software lock-in (Python coding program to eliminate noise from raw data) method was developed and successfully extracted THz time-domain signals with a signal-to-noise ratio of ~40,000 (the intensity ratio between the peak and average noise levels). The built-in sound card with the software lock-in method exhibited sufficiently good performance compared with the hardware-based method.

• 대한의용생체공학회:의공학회지
• /
• 제19권5호
• /
• pp.477-486
• /
• 1998

본 연구에서는 요분석용 스트립을 이용하여 요의 상태를 정량적·정성적으로 측정할 수 있는 요분석시스템을 구현하였다. 요분석시스템의 분석 알고리듬은 온도 변화, 전원 노이즈 통의 외란에 강인한 특성을 나타내기 위하여 퍼지 논리를 적용하였다. 강인하고 안정적인 요분석시스템을 설계하기 위하여 스트립 9가지 패드의 분강학적 특성을 검토하였다. 요분석시스템 하트웨어와 소프트웨어로 구성되었다. 요분석시스템의 하드웨어는 단일칩 마이크로프로세서를 사용하였고, 주변장치들로는 광하부, 트레이 제어, 전치증폭부, PC와의 통신, 열전사 프린터 및 동작 상태 표시기로 구성하였다. 요분석시스템의 소프트웨어는 시스템 프로그램과 분류 프로그램으로 구성하였다. 시스템 프로그램은 시스템 제어와 데이터 취득 및 분석을 수행하도록 하였다. 분규 프로그램은 퍼지추론부와 멤버쉽함수 발생기로 구성되었다 멤버쉽함수 발생기는 정도관리의 통계학적 방법을 이용하여 삼각형 멤버쉽함수를 생성하였다. 측정된 데이터는 PC로 전송되고, 전송된 데이터는 C++로 작성된 데이터 관리 및 취득 프로그램에 의해 저장된다. 요분석시스템의 정확도와 퍼지분류기의 안정성은 표준시료를 이용하여 평가하였다. 실험결과는 검사항목과 만족한 일치를 보였다.

• 한국콘텐츠학회논문지
• /
• 제8권10호
• /
• pp.373-380
• /
• 2008

이 연구의 목적은 한국대학생들의 영어 시제습득에 관한 것이다. 이를 위해 다음과 같이 연구문제를 제시하였다 첫 번째, 영어 시제습득이 실험집단과 통제집단에 차이가 있는가? 두 번째, 영어 능숙도에 따라 영어 시제 습득에 차이가 있는가? 를 조사하였다. 이 연구의 대상은 광주소재의 C 대학교 교양 영어를 수강하는 77명의 학생들이며 실험집단 39명이고 통제 집단은 38명이었다. 이 연구를 위한 자료는 영어 시제에 관한 40문제를 제시하였고 설문지 기법을 이용하였다. 이 연구의 분석방법은 통계프로그램인 SPSS 12.0을 이용하여 t 검정 방법을 실행하였다. 분석 결과 비록 하위 집단에서는 유의미한 차이를 보이지 않았으나, 실험집단과 통제집단은 통계적으로 유의미한 차이가 있었다. 독해지문을 활용한 영어시제 학습을 함으로써 학생들은 수업에 흥미를 가지고 참여 하였고 그 결과 실험집단이 통제집단보다 더 높은 학업 성취도를 보였다.

• 한국식품과학회지
• /
• 제19권2호
• /
• pp.129-133
• /
• 1987

마이크로컴퓨터를 식품가공 공정및 연구에서 자료수집및 제어에 응용하기 위하여 Apple ll 컴퓨터에 접속가능한 접속장치(接續裝置)를 설계 제작하였다. 또한 식품의 여러 공정에 주요한 변수가 되는 온도 및 무게값을 전기적 신호로 감지하는 센서와 A/D변환기(變換器)의 적정 입력전압범위 전환을 위한 증폭회로를 구성하였다. 이들을 연결시켜 필요한 BASIC어(語) 프로그램을 작성하여 식품건조 장치의 온도및 무게값의 측정장치로 활용 가능함을 보였다. 컴퓨터를 응용함으로써 공정자료의 정확성과 신뢰성을 향상시키고 여러가지 공정변수를 다량 수집할 수 있게되고 수집된 많은 자료를 용이하게 저장, 분석할 수 있었다. 본 실험장치에 여러가지 목적에 따라 필요한 측정 센서를 개발하여 부착(附着)함으로 비단 온도와 무게 측정뿐 아니라 제반(諸般)식품(食品)제조 공정과 실험의 자동화에 활용할 수 있는 기초적인 자료를 얻었다.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.658-664
• /
• 2013

In this paper, we present a case study of vibration suppression based on the application of active damping to the small boring process of a boring bar with diameter below ${\Phi}12$. The proposed active damping system consists of an acceleration sensor for real-time monitoring of the vibration signal, a driver for phase control in a computer program, and piezoelectric actuators for damping. In this system, the vibration signals are detected by the acceleration sensor and sent to the computer as an input. The phase shift parameter of the natural frequency of the input signal is sent to the data acquisition board in the computer and calculated by the phase control program. This study confirmed the effectiveness of this damping system, and it opens up the possibility of the development of active damping systems for small boring processes.

• 조명전기설비학회논문지
• /
• 제26권7호
• /
• pp.16-22
• /
• 2012

With the increase of consumption of new renewable energy, the use of Electric Double Layer Capacitor(EDLC) is being gradually widened as the next generation energy storage device. In order to expand the market of EDLC which is recently receiving a lot of attraction as a new promising area, development of a charge/discharge cycle tester to measure and test performance, is essential. Therefore, this research designed a circuit to measure capacity and internal resistance and a circuit to measure voltage maintenance properties, based on EDLC's basic charging/discharging properties so it is able to measure the state of charge and discharge at high speed. When evaluating performance characteristics, the 5[V]/100[A] prototype-EDLC charge/discharge testing system developed for this research showed ${\pm}0.1$[%] of accuracy of voltage and current measurement. It was also proved that the developed charge/discharge testing system for EDLC can be applied to the actual industry, when testing the entire system using a program produced for data monitoring and acquisition.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.315-318
• /
• 2007

Non-Destructive Health Monitoring using PZT sensors is a major concern and has great significance for research about NDT (Non-Destructive Test). In this paper, we study about the guided wave measurement method using PZT sensors to find cracks and estimate locations. Two aluminum beams bonded with PZT sensors were tested for estimating about the guided wave propagation characteristics and shape of each beam are decided in terms of analytical purpose. NI Signal Acquisition Device and specially designed LabVIEW VI program were used for data acquisition and analysis. The measured data were progressed by using a high-pass filtering.

• Smart Structures and Systems
• /
• 제8권1호
• /
• pp.107-117
• /
• 2011

Biological sensory systems continuously monitor and analyze changes in real-world environments that are relevant to an animal's specific behavioral needs and goals. Understanding the sensory mechanisms and information processing principles that biological systems utilize for efficient sensory data acquisition may provide useful guidance for the design of smart-sensing systems in engineering applications. Weakly electric fish, which use self-generated electrical energy to actively sense their environment, provide an excellent model system for studying biological principles of sensory data acquisition. The electrosensory system enables these fish to hunt and navigate at night without the use of visual cues. To achieve reliable, real-time task performance, the electrosensory system implements a number of smart sensing strategies, including efficient stimulus encoding, multi-scale virtual sensor arrays, task-dependent filtering and online subtraction of sensory expectation.