• 항공우주시스템공학회지
• /
• 제15권6호
• /
• pp.42-49
• /
• 2021

To develop a high-resolution electro-optical/infrared (EO/IR) payload to be mounted on a high-speed and performance fighter aircraft in an external POD for acquiring daytime and nighttime image information on tactical targets, simulations, including flight environments and maneuvers, should be performed. Such simulations are pertinent to predicting the performance of several variables, such as aerodynamic force and inertia load acting on the payload. This paper describes the development of a flight data acquisition and analysis system based on flight simulation software (SW) for mission simulation of super-maneuverability fighter equipped with EO/IR payload. The effectiveness of the system is verified through comparison with actual flight data. The proposed flight data acquisition and analysis system based on FlightGear can be used as an M&S tool for system performance analysis in the development of the EO/IR payload.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.439-440
• /
• 2012

New analysis methods complement classical approaches in the vehicle NVH development by reducing and accelerating iteration steps to obtain a target sound. Therefore, tools are required that allow an integrative approach of sound engineering and structural analysis and enable a precise simulation and modification based on measured data. The Response Modification Analysis (RMA) is such a hybrid solution, which provides indications of relevant transfer paths taking into account the sensitivity of response channels to modifications of reference channels.

• 분석과학
• /
• 제5권3호
• /
• pp.295-301
• /
• 1992

IBM-PC를 위한 다목적용 데이타 채집 및 컨트롤 장치를 개발하였다. 개발된 데이타 채집 및 컨트롤 장치는 컴퓨터를 이용한 데이타 채집 및 기기 컨트롤에 필요한 주요 기능을 대부분 보유하고 있다. 아날로그 신호는 최고 4쌍의 차동신호를 받을 수 있으며 실험조건에 따라 두 개의 12-bit A/D 컨버터를 선택하여 처리할 수 있다. 또한 2개의 12-bit D/A 컨버터와 3채널의 16-bit 카운터/타이머, 그리고 24-bit 디지탈 입출력장치 등 실험실에서 컴퓨터를 이용한 실험자동화에 필요한 대부분의 기능을 가지고 있어 다목적용으로 사용될 수 있다.

• 상하수도학회지
• /
• 제31권3호
• /
• pp.249-256
• /
• 2017

Recently, application areas based on M2M (Machine-to-Machine communications) and IoT (Internet of Things) technologies are expanding rapidly. Accordingly, water flow and water quality management improvements are being pursued by applying this technology to water and sewage facilities. Especially, water management will collect and store accurate data based on various ICT technologies, and then will expand its service range to remote meter-reading service using smart metering system. For this, the error in flow rate data transmitting should be minimized to obtain credibility on related additional service system such as real time water flow rate analysis and billing. In this study, we have identified the structural problems in transmitting process and protocol to minimize errors in flow rate data transmission and its handling process which is essential to water supply pipeline management. The result confirmed that data acquisition via communication system is better than via analogue current values and pulse, and for communication method case, applying the industrial standard protocol is better for minimizing errors during data acquisition versus applying user assigned method.

• 디지털산업정보학회논문지
• /
• 제5권4호
• /
• pp.127-137
• /
• 2009

This paper is proposed that in-output Digital module is acquired a vibration signal of a rotating machinery by Data Acquisition System. The module is designed to get ride of nose through low pass filter on the vibration signal from sensors and set the gain value for being able to sampling AC to DC, and also the sampled data by sampler and the conversed data by DIP/FPGA is supplied to the analyzer for analysis at a software tool. The DIP(Digital Signal Processor) of the Digital input/output Board makes Average voltage, Peak to Peak voltage, RMS(Root Mean Square) and Gap voltage, also FFT(Fast Fourier Transform) for rotating vibration diagnosis.

• 한국정보통신학회논문지
• /
• 제10권6호
• /
• pp.1082-1087
• /
• 2006

본 논문에서는 LabVIEW 기반의 가스터빈 데이터 취득 및 모니터링 시스템을 제안한다. C-Tune DAS로 명명된 실시간 모니터링 시스템은 가스터빈의 유지/보수시 실시간 동작을 분석하는데 중요한 역할을 담당한다. LabVIEW 소프트웨어는 고유 기능별로 데이터 취득부, 데이터 분석 및 표시부, 데이터 저장부로 구성된다. 데이터 취득부를 통해 PMS 서버와 두 대의 cFP로부터 데이터를 취득한다. 복합화력 발전소의 상용 가스터빈에 적용하여 개발된 모니터링 시스템의 타당성을 검증한다.

• Bulletin of the Korean Chemical Society
• /
• 제29권10호
• /
• pp.2017-2022
• /
• 2008

Of the experiments to shorten NMR measuring time by sparse sampling, non-uniform sampling (NUS) is advantageous. NUS miminizes systematic errors which arise due to the lack of samplings by randomization. In this study, I report the real-time acquisition of 3D NMR data using NUS and maximum-entropy (MaxEnt) data processing. The real-time acquisition combined with NUS can reduce NMR measuring time much more. Compared with multidimensional decomposition (MDD) method, which was originally suggested by Jaravine and Orekhov (JACS 2006, 13421-13426), MaxEnt is faster at least several times and more suitable for the realtime acquisition. The designed sampling schedule of current study makes all the spectra during acquisition have the comparable resulting resolutions by MaxEnt. Therefore, one can judge the quality of spectra easily by examining the intensities of peaks. I report two cases of 3D experiments as examples with the simulated subdataset from experimental data. In both cases, the spectra having good qualitie for data analysis could be obtained only with 3% of original data. Its corresponding NMR measuring time was 8 minutes for 3D HNCO of ubiquitin.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권7호
• /
• pp.123-129
• /
• 2020

The objective of this study is to examine the differentiated influence of sell-side advisors and buy-side advisors on mergers and acquisitions (M&A). Unlike prior studies on M&A advisors, the study addresses different roles of target and acquirer advisors, and explores their influences on the cumulative abnormal returns (CAR) and acquisition premiums with an empirical analysis of longitudinal data of M&As conducted by Japanese listed firms except financial companies from 1995 to 2012. M&A data were obtained from the Securities Data Corporation's (SDC) database, and the individual firm data were collected from the Nikkei Economic Electronic Databank System (NEEDS), which provides a wide range of corporate information including financial status, operational performance, and strategy. Using a sample of 452 cases for the CAR and 498 cases for the analysis of acquisition premiums, the empirical results support the hypotheses of the target advisor's positive association with CAR and acquirer advisor's positive association with acquisition premiums. The findings of this study indicate the target advisor's positive contribution to the success of acquisition process and performance, and acquirer advisor's negative influence on the deal progress. The study provides theoretical implications on M&A research and practical insights into the investment banking industry.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.229-234
• /
• 2006

Acquisition is to detect the presence of the GPS signal. Once the signal is detected, the estimated frequency and code phase are passed to a tracking loop to demodulate the navigation data. In order to detect the weak signal, multiple length of data integration is always needed. In this paper, we present five different acquisition approaches based on circular correlation and Fast Fourier Transform (FFT), using coherent as well as non-coherent integration techniques for the multiple length of collected GPS satellite signal. Moreover a general approach of determining the acquisition threshold is introduced based on noise distribution which has been proved effective, and independent of the hardware. In the end of this paper, the processing speed and acquisition gain of each method are illustrated, compared, and analyzed. The results show that coherent approach is much more time consuming compared to noncoherent approaches, and in the case of multiple length of data integration from 2ms to 8ms, the processing times consumed by the fastest non-coherent acquisition method are only 25.87% to 1.52% in a single search, and 34.76% to 1.06% in a global search of those in the coherent acquisition. However, coherent acquisition also demonstrates its better performance in the acquisition gain, and in the case of 8ms of data integration it is 4.23 to 4.41 dB higher than that in the non-coherent approaches. Finally, an applicable scheme of combining coherent and non-coherent acquisition approaches in the development of a real-time Software GPS receiver in the University of Tokyo is provided.

• Smart Structures and Systems
• /
• 제15권4호
• /
• pp.1019-1039
• /
• 2015

Shanghai Tower is a composite structure building with a height of 632 m. In order to verify the structural properties and behaviors in construction and operation, a structural health monitoring project was conducted by Tongji University. The monitoring system includes sensor system, data acquisition system and a monitoring software system. Focusing on the health monitoring in construction, this paper introduced the monitoring parameters in construction, the data acquisition strategy and an integration structural health monitoring (SHM) software. The integration software - Structural Monitoring/ Analysis/ Evaluation System (SMAE) is designed based on integration and modular design idea, which includes on-line data acquisition, finite elements and dynamic property analysis functions. With the integration and modular design idea, this SHM system can realize the data exchange and results comparison from on-site monitoring and FEM effectively. The analysis of the monitoring data collected during the process of construction shows that the system works stably, realize data acquirement and analysis effectively, and also provides measured basis for understanding the structural state of the construction. Meanwhile, references are provided for the future automates construction monitoring and implementation of high-rise building structures.