• Archives of Pharmacal Research
• /
• 제14권2호
• /
• pp.118-123
• /
• 1991

Potentially dangerous nitrosamines have been shown to result from the reaction of sodium nitrogusside with several drugs under physiological conditions (pH 7.3 and $37^\circ{C})$. In each case the products were identical to those produced upon reaction with nitrous acid at much lower pH values. Reaction rates were shown to reflect a first order dependence on both amine and nitroprusside concentrations and to increase at higher pH values, approximately in proportion to concentrations of unprotonated amine. Fast reactions of sodium nitroprusside with reduced glutathione, cysteine, and ascorbate suppress but do not prevent the conversion of amines into N-nitrosamines. These results show sodium nitroprusside to be very potent nitrosating agent under physiological conditions and suggested nitrosamines may be formed during its normal pharmacological administration.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1298-1303
• /
• 2008

In Korea, the management and remedial system of the slope near national road and highway has been studied actively. But in case of the slopes exist at the residential area and local government, there is not exact record of them. So in this study, we carried out analysis about nearly 14000 slopes which were reported by local government as the dangerous area. and went to the field work some of them.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.261-266
• /
• 2003

The growth behavior of the transverse crack, which was one of the most dangerous damages of rail defects, was investigated under mode I and mixed mode loading in rail steel. In the case of variable amplitude loading, the fatigue crack growth behavior was discussed using characteristic stress intensity factor ranges ${\Delta}_{rms}$. In addition, characteristic comparative stress intensity factor ranges ${\Delta}_{V,rms}$ was proposed to evaluate the quantitative effects of the variable amplitude under mixed mode loading. As a result, crack growth rate under variable amplitude loading was faster than that under constant amplitude loading.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.211-214
• /
• 2007

추진제 원료로 알루미늄 분말을 사용하는 고체추진기관은 지상연소시험을 수행하면 slag가 생성되어 연소관 내부에 쌓이게 된다. 연소시간이 긴 대형추진기관은 slag 양이 많아 취약부위에 쌓이게 되면 자칫 추진기관 폭발이 발생할 수도 있다. 이를 개선하고자 본 논문에서는 고체추진기관에서 slag가 축적되기 쉬운 부분에 라이너를 충진하는 공정을 개발하여 소개하려고 한다.

• 설비공학논문집
• /
• 제6권3호
• /
• pp.267-281
• /
• 1994

The Combustion gas behavior induced by fire in a building is numerically investigated. The typical building for this analysis is partially divided by a vertical baffle projecting from the ceiling. The solution procedure includes the low Reynolds number ${\kappa}-{\varepsilon}$ model for the turbulent flow and the discrete ordinates method is used for the calculation of radiative heat transfer equation. The effects of the location and size of fire source and baffle length on velocity and temperature distributions, species mass fraction and flame location are analyzed. As the results of this study, it is found that the case when the fire source is located at the vertical wall is more dangerous than at the bottom wall in view of the combustion products and flame location. It is also found that the radiation effect cannot be neglected in analyzing the building in fire.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.563-570
• /
• 2009

In the future, most military activities will be replaced by robots. Because of many dangerous factors in battlefield, reconnaissance should be performed by robot. Reconnaissance robot should be small for not being detected, be light and simple structure for personal portability and overcome unexpected rough terrain for mission completion. In case of small and light robot, it can't get enough friction force for movement. Therefore small reconnaissance robot need jumping function for movement. In this paper we proposed a biologically inspired jumping mechanism. And we adjusted moment and jumping angle by using four bar linkage, especially varying coupler length.

• 한국시스템다이내믹스연구
• /
• 제3권2호
• /
• pp.113-140
• /
• 2002

The cost-benefit analysis is a technique for assisting with decision about the use of society's scare resources. There exists no detailed assessment like cost-benefit analysis. But recently, many policy analysts criticized the merit of cost-benefit analysis. As it is, it can be said that partial or approximate estimates of benefit and cost may be more dangerous than helpful. The purpose of this study is to overcome the limit of traditional cost-benefit analysis. For this purpose, we use the system dynamics approach for setting up new cost-benefit analysis, which we named that ‘Dynamics Cost-Benefit Analysis'. The usefulness of ‘Dynamics Cost-Benefit Analysis' is as follows; finding structural causal relationship between cost factors and benefit factors, understanding the long-term behavior of systems economic feasibility. In this study, we apply 'Dynamic Cost-Benefit Analysis' to case that is construction investment of funeral house by local government sector.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.478-478
• /
• 2000

In this paper, presents the design of mobile field robot controlled by microcomputer. The computer works as the supervisory system for decision making and sending command to control the field robot. An information from encoder, infrared sensors using for control task of the robot that can be interconnected with the computer through the serial communication RS422 standard. In this case, the user can design the program algorithm base on microcomputer in order to control and define the routing of the mobile robot. Moreover, the robot can be installed other equipment fer collect data such as picture, sound, temperature etc., in order to working in the dangerous area.

• 설비공학논문집
• /
• 제15권3호
• /
• pp.196-202
• /
• 2003

Two dimensional modeling was carried out to find the safety distance between the defrost heater and the plastic inner wall of domestic refrigerator Estimation was processed for the three cases; the estimation of plastic wall temperature (1) without any protection, (2) with an aluminum foil attached on a wall, and (3) with an aluminum shield installed between heater and wall. The former two cases are found to be dangerous during defrosting process, because the temperatures of inner wall reach above 80'C , which is the upper temperature limit of the wall material. The case with an aluminum shield is considered to be safe by maintaining the temperature of the wall in the range of 6$0^{\circ}C$ during defrosting process.

• Journal of Chest Surgery
• /
• 제26권10호
• /
• pp.801-803
• /
• 1993

Surgical correction of patent ductus arteriosus is,under most circumstances,highly successful and carries a low mortality. But infected PDA is yet potentially dangerous due to its frequent recurrence and resistant organisms to antibiotics. And,in surgical correction,surgeon may face the possibility of tearing of ductus arteriosus arterial end due to friability and adhesion of its surrounding tissue.This report demonstrats another problem in treatment of infected patent ductus arteriosus.This thirteen years old female patient received susceptible combined antibiotics intravenously from the day of admission and remitted from 4th.week of therapy.This remission state continued for 12days without relapse.But the pulmonary artery ruptured in this remission period.In autopsy,bacteria was not found in ductal vegetation.Also,there was no pulmonary artery aneurysm,Our experience show that in infected PDA,pulmonary artery can rupture spontaneously during remission period without aneurysmal formation.