• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.224-225
• /
• 2005

The lightness of components required on marine and shipbuilding industry is requiring high strength of components. In particular, fatigue failure phenomena, which happen in metal, bring on danger in human life and property. Therefore, antifatigue failure technology takes an important part of current industries. In this study, it was investigated about endurance and fatigue crack propagation rate of according to stress ratio of SMAW commonly using for welding structures in present. Fatigue crack propagation rate(da/dN) of low load(R=0.1) was lower than of high load(R=0.6) for piping weld. And in stage I, ${\Delta}$Kth, the threshold stress intensity factor of the weld under heavy load is higher than under small load. Fatigue life shows more improvement in the weld of stress ratio R=0.l than in the weld of stress ratio R=0.6.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2001.09a
• /
• pp.243-250
• /
• 2001

Industrial machines are sometimes exposed to the danger of earthquake. In the design of a mechanical system, this factor should be accounted for from the viewpoint of reliability. A method to analyze a complex nonlinear structure system under random excitation is proposed. First, the actual random excitation, such as earthquake, is approximated to the corresponding Gaussian process far the statistical analysis. The modal equations of overall system are expanded sequentially. Then, the perturbed equations are synthesized into the overall system and solved in probabilistic way. Several statistical properties of a random process that are of interest in random vibration applications are reviewed in accordance with nonlinear stochastic problem. The obtained statistical properties of the nonlinear random vibration are evaluated in each substructure. Comparing with the results of the numerical simulation proved the efficiency of the proposed method.

• Journal of Environmental Health Sciences
• /
• v.11 no.1
• /
• pp.9-14
• /
• 1985

This experiment was carried out to study on the effect of SO$_2$ gas to chemical composition of tobacco leaves during flue-curing. The results were as follows: SO$_2$ gas in briquet was the major factor to damage with tobacco leaves. The damage only occured in a presence of moisture in tobacco leaves, it did not occured after color fix'lng stage which is a little leaf moisture. The danger of damage to tobacco leaves lies in 10ppm of SO$_2$ gas concentration. Follow with the SO$_2$ gas concentration increased, sugar and nitrogen contents became higher, polyphenol contents were loss, and the quality of tobacco leaves declined.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.5
• /
• pp.59-67
• /
• 2005

The main objective of the statistical analysis about industrial accidents is to find out what is the dangerous factor in its own industrial field so that it is possible to prevent or decrease the number of the possible accidents by educating those who work in the fields for safety tools. However, so far, there is no technique of quantitative evaluation on danger. Almost all previous researches as to industrial accidents have only relied on the frequency analysis such as the analysis of the constituent ratio on accidents. As an application of data mining technique, this paper presents analysis on the efficiency of the CHAID algorithm to classify types of industrial accidents data and thereby identifies potential weak points in accident risk grouping.

• Journal of Ship and Ocean Technology
• /
• v.12 no.4
• /
• pp.32-39
• /
• 2008

According to the increase of the requirement for the safety and environmental protection at sea, safety is a core design factor of maritime systems. Safety is defined as a perceived quality that determines to what extent the management, engineering and operation of a system is free of danger to life, property and the environment. There are many possible approaches in dealing with the safety of ships. The risk-based approach is one of the most systematic and reasonable way currently in design, operation and regulatory works for ship safety. This paper proposes a concept of total risk management for ship safety, and introduces a prototype system implemented based on this concept as a framework of design and operation of ships.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1964-1966
• /
• 2003

Lighting in the tunnel makes for safe driving of cars taking into account of change in perception arisen in the sight of drivers of cars entering into and passing tunnel, drivers' mental reaction and unique circumstances of a tunnel. There are many variables to satisfy safe driving in the tunnel. Since tunnels are mostly located in the mountainous area and illumination at the approach part differs largely depending on the surrounding circumstances, a standard different from that of common lighting is applied. An accidentin the tunnel, which involves same danger as in underground, may lead to a large mishap. Therefore, control by sensors inside and outside of tunnel ensures prevention of an accident through control of illumination at the approach part and inside of tunnel. It is very important in the aspect of saving energy since such control is available to reduce depreciation factor resulted from early excessive intensity of illumination.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.426-431
• /
• 2006

The case where a drain cannot flow backwards, a sewer institution can be unmanageable in this, and a mad is under water momentarily by local heavy nin by the climate phenomenon in spite of not being a lowlands belt has occurred well more than recently. By the flooded mea since it is in the state which has some human bodies at hand, when a short circuit occurs in street lighting pole which is the electric institution thing of a road, the danger of an electric shock accident becomes higher. In this paper, it was going to show improvement plan for grasping the brittle factor of street lighting pole electricity facilities through the on-site survey of street lighting pole electricity facilities, and improving this.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.4
• /
• pp.43-52
• /
• 2017

The purposes of this study are to analyze risks of construction step BIM(Building Information Modeling) applied project and improve it. Recently, construction industry has emphasized an importance of BIM for efficient utilization of various information. In the whole life cycle of huge construction project, there are cases introducing BIM and projects applying BIM are gradually increased to the work of construction step. However, the process of communication is not established, so the contents of BIM process of construction step are just showing rough fields and concepts of working utilization, so it's restrictive to utilize BIM actively on constructions step. Through results of case study in this research, constructor risks of BIM business should be efficiently treated with Fuzzy-FMEA that is more precise than existing danger evaluation.

• Journal of Ginseng Research
• /
• v.43 no.3
• /
• pp.335-341
• /
• 2019

Background: Inflammation is a host-defensive innate immune response to protect the body from pathogenic agents and danger signals induced by cellular changes. Although inflammation is a host-defense mechanism, chronic inflammation is considered a major risk factor for the development of a variety of inflammatory autoimmune diseases, such as rheumatic diseases. Rheumatic diseases are systemic inflammatory and degenerative diseases that primarily affect connective tissues and are characterized by severe chronic inflammation and degeneration of connective tissues. Ginseng and its bioactive ingredients, genocides, have been demonstrated to have antiinflammatory activity and pharmacological effects on various rheumatic diseases by inhibiting the expression and production of inflammatory mediators. Methods: Literature in this review was searched in a PubMed site of National Center for Biotechnology Information. Results: The studies reporting the preventive and therapeutic effects of ginseng and ginsenosides on the pathogenesis of rheumatic diseases were discussed and summarized. Conclusion: Ginseng and ginsenosides play an ameliorative role on rheumatic diseases, and this review provides new insights into ginseng and ginsenosides as promising agents to prevent and treat rheumatic diseases.

• Convergence Security Journal
• /
• v.18 no.1
• /
• pp.143-155
• /
• 2018

The purpose of this study is to extract the failure attributions to identify the failure factors of the security guards and to derive the risk factor factors through failure cases analysis. Failure attributions were prepared by using semi-structured questionnaires(17) and closed questionnaires(179) starting from the fully open questionnaires(8), and processed through SPSS 21.0 and AMOS 21.O statistical packages. As a result of summarizing the causal relationship between the failure attribution and the failure case (patrol failure pattern factor), In Park Jung-Hee's assassination, lack of experience(2), negative mind(1), lack of work ability(1), lack of experience(2), organizational non-system activeness(2), lack of awareness of mission(1) Failure(2), lack of consciousness(2), and 14 failure patterns were found. Aung-San National Cemetery explosion occurred in eight failure patterns including insecurity(1), negative mind(1), lack of work skills(2), lack of experience(2), individualism(1), There were eight failure patterns in the case of Mr. Yook Young-Su 's sniping, including insincerity(2), negative mind (1), lack of experience(2), lack of awareness of mission(2) and failure to share work(1).