• Journal of Sasang Constitutional Medicine
• /
• v.25 no.4
• /
• pp.320-329
• /
• 2013

Objectives We carried out this study to know that there is any differences on the health condition of the middle aged women between Sasang coustitution. We used Diagnosis System of Oriental Medicine(DSOM) for diagnosis and determining pattern identification. Methods This research was approved by the Dongeui University Oriental Hospital Institutional Review Board (certificate no. 2011-06). From March 2012 to October 2012, we examined Kupperman's index, the MENQOL, DSOM, and Sasang Constitution of 291 women from the general population, with ages ranging from 40 to 60 years. And we compared the results statistically by the chi-square test and F-test. Results and Conclusions We excluded 4 Taeyangin to analyze because they were few, and analyzed 287 subjects which were 53 Soyangin, 131 Taeeumin, and 103 Soeumin. 1. The pathogenic factors that showed significant differences were deficiency of qi, insufficiency of Yin, heat on the frequency of the output and deficiency of qi, heat, phlegm on the mean of pathogenic factor score. Deficiency of qi was higher in Soeumin, insufficiency of Yin and heat were higher in Taeeumin, and phlegm was higher in Taeeumin and Soeumin. Overall, Soyangin tended to be lower than others on both the frequency of the output and the mean of pathogenic factor score. 2. The middle aged women with ages ranging from 40 to 60 years tended to be dryness, kidney, damp and became to be blood-deficiency, stagnation of qi, heart easily. Soyangin was more health than others, Taeeumin tended to be heat, phlegm, insufficiency of Yang, and Soeumin tended to be deficiency of qi.

• The Journal of Korean Medicine
• /
• v.21 no.3
• /
• pp.213-219
• /
• 2000

We treated a 53 year-old male patient. He had alcoholic liver cirrhosis and diabetes. The main symptoms were fatigue, ascites, edema, anorexia, indigestion, constipation, and abdominal pain. We diagnosed him as 'the retention of pathogenic damp-heat in the liver and gall bladder’ and adminstered Saenggangeonbi-tang three times a day. We observed clinical symptoms, liver function test(AST, ALT, ${\gamma}-GT$, ALP, total bilirubin), nutritional state(total protein, albumin) and capillary blood glucose. After treatment, all the main symptoms disappeared and the patient's nutritional state has improved. Child's grade using the improvement index in liver cirrhosis has changed from B to A. Although the very mechanism of Saenggangeonbi-tang was not proven, we could suggest that Saenggangeonbi-tang is not toxic to the liver and has a good effect on alcoholic liver cirrhosis with diabetes mellitus.

• Current Photovoltaic Research
• /
• v.8 no.1
• /
• pp.12-16
• /
• 2020

This study investigates the degradation characteristics of different material types of ethyl vinyl acetate (EVA) and polyolefin (POE) with combining transparent backsheet. To this end, we fabricated samples with structure of glass/encapsulant/transparent backsheet for each type of encapsulants, and shingled Si modules with the same structure. The samples were then subjected to accelerated test by storing under damp heat condition of 85℃ and 85% RH. As a result, encaplsulant discoloration was observed, which the transmittance of the samples with EVA decreased in a rapid rate than the samples with POE. The discoloration also affected a power degradation of the shingled modules with a reduction of current density, resulting that the module with EVA showed more drop on the efficiency than the modules with POE. Furthermore, corrosion of the soldered ribbon caused by acetic acid produced from the degraded EVA also contributed in fill factor reduction.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.12
• /
• pp.776-791
• /
• 2014

A marvellous solar cell technology system based on organometal halide perovskites has recently shown an unprecedented progress in power conversion efficiency (PCE); the certified one of 17.9% and unconfirmed of 19.3%, as well as the estimated electricity with a generating cost lower than the half of conventional methods based on fossil fuels. In this report the present status of stability with regards to moisture, ambient temperature, ultraviolet and lead toxicity as well as the key technological developments for the early commercialization are covered. Comprehensive understanding of material science for perovskites is required, together with complete encapsulation technologies beyond those for OLEDs, in order to ensure a 20-year-longer-than lifetime of PSCs (perovskite solar cells) and the stability according to the IEC 61646 damp heat test standard, which will result in the replacement of silicon solar cells with PSCs.

• Current Photovoltaic Research
• /
• v.9 no.2
• /
• pp.36-44
• /
• 2021

To endorse the reliability and durability of the solar photovoltaic (PV) device several tests were conducted before exposing to the outdoor field in a non-ideal condition. The PV module has high probability that intend to perform adequately for 30 years under operating conditions. To evaluate the long term performance of the PV module in diversified terrestrial conditions, one should use the outdoor performance data. However, no one wants to wait for 25 years to determine the module reliability. The accelerating stress tests performing in the laboratory by mimicking different field conditions are thus important to understand the performance of a PV module. In this review, we will discuss briefly about different accelerating stress types, levels and prioritization that are used to evaluate the PV module reliability and durability before using them in real field.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.19 no.4
• /
• pp.1082-1087
• /
• 2005

About the case of the cerebral infarction patient who has diagnosed Mitral Regurgitation in valvular heart disease and admissed to our hospital from 26. April. 2004 to 14. May. 2004, we diagnosed and treated him as heart disease due to wind, damp-heat at the point of Oriental Medicine and got the improvement in the chest pain, dyspnea and etc. so we report. We think that the patient must get the screen test exactly and treat the disease properly. and if we apply this result to clinical cases at the point of Oriental Medical base from gathering and researching more cases, it will arouse sympathy-the excellence of Oriental Medicine and make the necessity of the further research and report from now on.

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.2
• /
• pp.157-161
• /
• 2020

Regarding greenhouse gas reduction, BIPV (Building Integrated Photovoltaics) is an important technology that can generate its own power in urban buildings based on clean energy resources. In particular, the perovskite material is attracting attention as a BIPV solar cell because it can have various colors and transparency. However, it is not easy to increase both transparency and efficiency factors because solar cell transparency and efficiency are inversely related to each other. Therefore, in this paper, we propose a semi-transparent perovskite solar cell structure that can improve both transparency and efficiency, and evaluate the stability according to international standard.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.3
• /
• pp.17-24
• /
• 2021

Perovskite solar cells (PSCs) can be fabricated through solution process economically with variable bandgap that is controlled by composition of precursor solution. Tandem cells in which PSCs combined with silicon solar cells have potential to reach high power conversion efficiency over 30%, however, lack of long-term stability of PSCs is an obstacle to commercialization. Degradation of PSCs is mainly attributed to the mass transport of halide and metal electrode materials. In order to ensure the long-term stability, the mass transport should be inhibited. In this study, we confirmed degradation behaviors due to the mass transport in PSCs and designed buffer layers with LiF and/or SnO₂ to improve the long-term stability by suppressing the mass transport. Under high-temperature storage test at 85℃, PSCs without the buffer layers were degraded by forming PbI₂, AgI, and the delta phase of the perovskite material, while PSCs with the buffer layers showed improved stability with keeping the original phase of the perovskite. When the LiF buffer and encapsulation were applied to PSCs, superior long-term stability on 85℃-85% RH dump heat test was achieved; efficiency drop was not observed after 200 h. It was also confirmed that 90.6% of the initial efficiency was maintained after 200 hours of maximum power tracking test under AM 1.5G-1SUN illumination. Here, we have demonstrated that the buffer layer is essential to achieve long-term stability of PSCs.

• Current Photovoltaic Research
• /
• v.5 no.2
• /
• pp.47-54
• /
• 2017

We report finding ways to improve the long-term reliability of PV module including the heterostructure with the intrinsic thin layer (HIT) solar cell. We point out the stability of the products of Panasonic HIT cell. We account for a brief description of the module manufacturing process to investigate the issues of each process and analyze the causes. We carried out the silicon PV module of the glass to glass type under the damp heat test around 1000 hours. However, it degraded around 7% of PV module power after 300 hours exposure in comparison with the initial status (Initial: 12.7 Watt). We investigated possible cause and solutions for the module performance to develop the long-term reliability.

• Journal of the Korean Solar Energy Society
• /
• v.37 no.2
• /
• pp.77-85
• /
• 2017

Thin crystalline silicon (C-Si) solar cell is expected to be a low price energy source by decreasing the consumption of Si. However, thin c-Si solar cell entails the bowing and crack issues in high temperature manufacturing process. Thus, the conventional tabbing process, based on high temperature soldering (> $250^{\circ}C$), has difficulties for applying to thin c-Si solar cell modules. In this paper, a conductive paste (CP) based interconnection process has been proposed to fabricate thin c-Si solar cell modules with high production yield, instead of existing soldering materials. To optimize the process condition for CP based interconnection, we compared the performance and stability of modules fabricated under various lamination temperature (120, 150, and $175^{\circ}C$). The power from CP based module is similar to that with conventional tabbing process, as modules are fabricated. However, the output of CP based module laminated at $120^{\circ}C$ decreases significantly (14.1% for Damp heat and 6.1% for thermal cycle) in harsh condition, while the output drops only in 3% in the samples process at $150^{\circ}C$, $175^{\circ}C$. The peel test indicates that the unstable performance of sample laminated at $120^{\circ}C$ is attributed to weak adhesion strength (1.7 N) between cell and ribbon compared to other cases (2.7 N). As a result, optimized lamination temperature for CP based module process is $150^{\circ}C$, considering stability and energy consumption during the fabrication.