• Tuberculosis and Respiratory Diseases
• /
• v.64 no.6
• /
• pp.460-465
• /
• 2008

Incidences of pulmonary thromboembolism markedly increase with age. Risk factors of pulmonary thromboembolism are surgery, trauma, acute medical illness, immobilization, pregnancy, usage of hormone, and advanced age. In the cases of thrombomembolism occurred in young age, the possibility of thrombophilc state is needed to be investigated. Among many diseases or state associated thrombophilic state, homocyteinemia should be considered a cause of thromboembolism before fifth decade. Homocyteinemia is caused by deficiency of N-5-methyltetrahydrofolate, cystathionie ${\beta}$-synthase and vitamin B12. The presence of the mutation of 5,10-methyleneterahydrofolate lead to homocyteinemia by deficiency of N-5-methyltetrahydrofolate. Homocysteine is acknowledged the risk factor of cardiovascular event, and storke. Homocysteinemia can be the cause of thromboemboism via damaging endotheial cell. We present two cases of pulmonary thromboembolism in young age which seem to be associated with homocysteinemia precipitated by mutation of 5,10-methyleneterahydrofolate.

• Journal of Korean Society of Forest Science
• /
• v.35 no.1
• /
• pp.47-55
• /
• 1977

As the development of national lands increase, the necessity to develop less favorable terrain also increases. It also becomes more difficult and complicated to provide access that is both economical and safe from contributing to soil erosion on roadsides and to londscape damages. Because of the increased and justified emphasis upon environmental degradation, proper stabilization of the cut-and bank slopes of roadsides, plant sites and building sites in Korea requires careful planning as well as execution of the constructions. All fill slopes should be compacted to a degree consistent with design standards and material properties. Drainage facilities should be provided to prevent damaging concentrations of surface runoff and to avoid high pore pressures in cuts and fills. All surfaces of cut-fill slopes should be revegetated with suitable species as soon as possible after construction. To stabilize the cut-fill slopes of highway roadsides should be considerded the factor of stabilization as well as landscape conservation especially. Such basic influences as the effects of vegetations on water balance of rain fall, on the control of surface erosion and on the surface slope failures are briefly discussed in the report.

• Archives of Plastic Surgery
• /
• v.47 no.1
• /
• pp.62-69
• /
• 2020

Background Cryolipolysis, a preferred method for minimally invasive body contouring, involves the noninvasive cooling of adipocytes to induce lipolysis without damaging other tissues. This study aimed to evaluate the safety and efficacy of cryolipolysis for the treatment of excessive fat tissue. Methods Between May 2014 and December 2017, 231 patients with 448 areas of interest were enrolled and their records were retrospectively reviewed. We used five different vacuum applicators, and the best-fitting applicator was used for each area. One cycle of cryolipolysis was applied at a cooling intensity factor of 41.6. The efficacy was evaluated 12 weeks after treatment via review of clinical photographs, the pinch test, and ultrasonographic measurements of fat thickness. The occurrence of any complications was also assessed. Results The volume was reduced in all of the areas to which cryolipolysis was applied. The rate of reduction of the fat layer as measured via the pinch test was 19.2%, and the rate of the decrease in fat layer thickness as measured via ultrasonography was 22.8%. Fat reduction of the upper arm differed significantly from that of the abdomen and flank, but no significant difference was found between sexes. The side effects were limited to erythema, edema, bruising, and numbness at the treatment site and resolved without treatment. Conclusions Cryolipolysis, with new and better-fitting applicators, is safe, fast, and effective for the reduction of excessive fat tissue on the abdomen, back, flank, and extremities. It is a good option for treating excess adipose tissue in Asian patients.

• Korean Journal of Environmental Biology
• /
• v.36 no.4
• /
• pp.687-693
• /
• 2018

The active development of the global marine trade industries has been known to increase the inflows of marine invasive species and harmful organisms into the ecosystem, and the marine ecological disturbances. One of these invasive species, Ciona robusta, has now spread to the Korea Strait, the East Sea, and Jeju Island in connection with the climate change but not the Yellow Sea in Korea. Currently, the spread and distribution of C. robusta is increasingly damaging aquaculture and related facilities. Therefore, this study aims to identify the spread of C. robusta and potential habitats and to secure a data for the prevention of effective management measures due to climate change as well as damage the reduction in future through the prediction of spread. We used environmental variables in BioOracle. Also, the potential habitat and distribution of C. robusta was predicted using MaxEnt, a species distribution model. Two different RCP scenarios(4.5 and 8.5) were specified to predict the future distributions of C. robusta. The results showed that the biggest environmental factor affecting the distribution of C. robusta was the salinity as well as the highest distribution and potential habitats existent in the East Sea and around Jeju Island.

• Journal of the Korean Society of Food Culture
• /
• v.34 no.1
• /
• pp.84-92
• /
• 2019

Purpose: The objective of this study was conducted to investigate the effects of rutin, buckwheat components on cell growth and anti-inflammation in adipocyte 3T3-L1 and human colon cancer cell SW-480. Methods: We cultured 3T3-L1 adipocyte and SW-480 colon cancer cell to confluence, at which time starvation was induced with SFM for 1 day. Cells were then cultured in medium containing 0, 25, 50, or $100{\mu}mol/mL$ of rutin 3T3-L1 or 0, 10, 20, or $40{\mu}mol/mL$ SW-480. Cell viability was measured using a cell viability kit. In addition, we examined the expression of mRNA related to inflammation. RT-PCR was used to quantity tumor necrosis factor ($TNF-{\alpha}$), interleukin-$1{\beta}$ ($IL-1{\beta}$), IL-6, inducible nitric oxide synthase (iNOS), and cyclooxygenase-2 (COX-2) mRNA levels. Results: Rutin significantly inhibited 3T3-L1 and SW-480 cell proliferation in a dose and time dependent manner. Rutin also significantly reduced the mRNA expression of $IL-1{\beta}$, IL-6 and $TNF-{\alpha}$ at the highest dose. In addition, rutin treatment caused a significant reduction in COX-2 and iNOS mRNA levels compared to the control group. Conclusion: Overall, our results suggest that rutin has the potential to reduce inflammation, and that these effects are greater during tissue-damaging inflammatory conditions.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.1
• /
• pp.99-109
• /
• 2022

This study is the first report on production and characterization of the enzyme from an Ornithinibacillus species. A 4.2-fold increase in the extracellular protease (called L9^T) production from Ornithinibacillus caprae L9^T was achieved through the one-factor-at-a-time approach and response surface methodological optimization. L9^T protease exhibited a unique protein band with a mass of 25.9 kDa upon sodium dodecyl sulfate-polyacrylamide gel electrophoresis. This novel protease was active over a range of pH (4-13), temperatures (30-80℃) and salt concentrations (0-220 g/l), with the maximal activity observed at pH 7, 70℃ and 20 g/l NaCl. Proteolytic activity was upgraded in the presence of Ag⁺, Ca²⁺ and Sr²⁺, but was totally suppressed by 5 mM phenylmethylsulfonyl fluoride, which suggests that this enzyme belongs to the serine protease family. L9^T protease was resistant to certain common organic solvents and surfactants; particularly, 5 mM Tween 20 and Tween 80 improved the activity by 63 and 15%, respectively. More importantly, L9^T protease was found to be effective in dehairing of goatskins, cowhides and rabbit-skins without damaging the collagen fibers. These properties confirm the feasibility of L9^T protease in industrial applications, especially in leather processing.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.225-230
• /
• 2023

In this study, the porous structure inside the hair were observed using an optical microscope without damaging the hair, and the porosity inside the hair was quantitatively expressed using the results. Experiments were conducted on the effect of the decrease in density inside the hair on the bending and tensile properties of the hair, and experiments on endogenous and extrinsic factors were conducted to find out the causes of the decrease in density inside the hair. As for the endogenous factor, the porosity of gray hair, one of the representative symptoms of aging, was compared with normal hair. As for extrinsic factors, it was observed that the internal density of hair decreased by surfactant and heat, which are factors that can cause hair damage in daily life. In addition, we confirmed whether it is possible to increase the internal density and luster of the hair by using an amino acids and material that can prevent hair lipid predisposition.

• Journal of Periodontal and Implant Science
• /
• v.25 no.1
• /
• pp.167-178
• /
• 1995

It has been believed that the increased release of free oxygen radicals and their tissue damaging potency might be a contributing factor in the pathogenesis of periodontal disease. Antioxidant enzymes such as superoxide dismutase(SOD) and catalase can protect the tissue damage from the free oxygen radicals($O_2^-,H_2O_2$, and $OH^-$). In order to investigate the SOD- and catalase - activity in the blood plasma and red blood cells(RBCs) of the patients with perodontitis, 19 male periodontitis patients($25{\sim}35$ years old) who had good general health, more than 10 teeth with severely inflamed gingiva, attachment loss more than 6mm and bone loss were selected as periodontitis group, and 13 male volunteers($22{\sim}29$ years old) with good general and periodontal health were selected as normal group. After blood plasma and RBC were separated from peripheral blood of 2ml collected from antecubital vein of each subject, SOD- activity in blood plasma and RBCs was measured by the same method that Paoletti et al. did, and catalase - activity in RBC was measured by the same method that Beers et al, did. The difference of SOD- and catalase - activity between the normal and the periodontitis groups was statistically analyzed by Student t-test with SPSS/PC program.The results were as follows : 1. SOD activity in blood plasma was significantly lower in the periodontitis group($1.986{\pm}0.893$) than in the normal group($3.324{\pm}1.044$)(p<0.05). 2. There was no statistical significance in the difference of SOD- activity in RBCs between the periodontitis group($7.753{\pm}3.206$) and the normal group($8.116{\pm}1.192$)(p$242.8{\pm}45.6$) than in the normal group($280.2{\pm}32.6$)(p

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1261-1262
• /
• 2008

Laser-based crystallization techniques are ideally-suited for forming high-quality crystalline Si films on active-matrix display backplanes, because the highly-localized energy deposition allows for transformation of the as-deposited a-Si without damaging high-temperature-intolerant glass and plastic substrates. However, certain significant and non-trivial attributes must be satisfied for a particular method and implementation to be considered manufacturing-worthy. The crystallization process step must yield a Si microstructure that permits fabrication of thin-film transistors with sufficient uniformity and performance for the intended application and, the realization and implementation of the method must meet specific requirements of viability, robustness and economy in order to be accepted in mass production environments. In recent years, Low Temperature Polycrystalline Silicon (LTPS) has demonstrated its advantages through successful implementation in the application spaces that include highly-integrated active-matrix liquid-crystal displays (AMLCDs), cost competitive AMLCDs, and most recently, active-matrix organic light-emitting diode displays (AMOLEDs). In the mobile display market segment, LTPS continues to gain market share, as consumers demand mobile devices with higher display performance, longer battery life and reduced form factor. LTPS-based mobile displays have clearly demonstrated significant advantages in this regard. While the benefits of LTPS for mobile phones are well recognized, other mobile electronic applications such as portable multimedia players, tablet computers, ultra-mobile personal computers and notebook computers also stand to benefit from the performance and potential cost advantages offered by LTPS. Recently, significant efforts have been made to enable robust and cost-effective LTPS backplane manufacturing for AMOLED displays. The majority of the technical focus has been placed on ensuring the formation of extremely uniform poly-Si films. Although current commercially available AMOLED displays are aimed primarily at mobile applications, it is expected that continued development of the technology will soon lead to larger display sizes. Since LTPS backplanes are essentially required for AMOLED displays, LTPS manufacturing technology must be ready to scale the high degree of uniformity beyond the small and medium displays sizes. It is imperative for the manufacturers of LTPS crystallization equipment to ensure that the widespread adoption of the technology is not hindered by limitations of performance, uniformity or display size. In our presentation, we plan to present the state of the art in light sources and beam delivery systems used in high-volume manufacturing laser crystallization equipment. We will show that excimer-laser-based crystallization technologies are currently meeting the stringent requirements of AMOLED display fabrication, and are well positioned to meet the future demands for manufacturing these displays as well.

• Journal of Nutrition and Health
• /
• v.48 no.6
• /
• pp.459-467
• /
• 2015

Purpose: We developed a method to load lycopene into maltodextrin and cyclodextrin in an attempt to overcome the poor bioavailability and improve the anti-inflammatory effect of this polyphenol. Methods: Nanosized lycopenes were encapsulated into biodegradable amphiphillic cyclodextrin and maltodextrin molecules prepared using a high pressure homogenizer at 15,000~25,000 psi. Cell damage was induced by lipopolysaccharides (LPS) in a mouse macrophage cell line, RAW 264.7. The cells were subjected to various doses of free lycopene (FL) and nanoencapsulated lycopene (NEL). RT-PCR was used to quantify the tumor necrosis factor (TNF-${\alpha}$), interleukin-$1{\beta}$ (IL-$1{\beta}$), IL-6, inducible nitric oxide synthase (iNOS), and cyclooxigenase-2 (COX-2) mRNA levels, while ELISA was used to determine the protein levels of TNF-${\alpha}$, IL-$1{\beta}$, and IL-6. Results: NEL significantly reduced the mRNA expression of IL-6 and IL-$1{\beta}$ at the highest dose, while not in cells treated with FL. In addition, NEL treatment caused a significant reduction in IL-6 and TNF-${\alpha}$ protein levels, compared to cells treated with a similar dose of FL. In addition, mRNA expression of iNOS and COX-2 enzyme in the activated macrophages was more efficiently suppressed by NEL than by FL. Conclusion: Overall, our results suggest that lycopene is a potential inflammation reducing agent and nanoencapsulation of lycopene can further improve its anti-inflammatory effect during tissue-damaging inflammatory conditions.