• International Journal of Highway Engineering
• /
• v.3 no.3 s.9
• /
• pp.119-133
• /
• 2001

The stiffness of chemcrete modified asphalt mixtures increase rapidly with time in the presence f oxygen and high temperature, Sometimes the asphalt pavements that have chemcrete modified asphalt mixture applied on the surface none show premature cracking because of the excessive increase in the stiffness f the asphalt mixtures. To mitigate this premature cracking, the chemcrete modified mixtures have been used as a base course material. In this study, the performance of the chemcrete modified asphalt binder and mixtures are investigated through a course of various laboratory tests including dynamic shear rheometer and bending beam rheometer tests for binders and uniaxial tensile fatigue, wheel tracking, and moisture damage tests for the mixtures. And also the resilient modulus of the conventional and chemcrete modified mixtures are compared based on the test results conducted on the specimens obtained from various in-situ test sections. It can be concluded from the tests results that the chemcrete modified mixtures show better rutting resistance than conventional mixtures. The chemcrete modified mixtures may have low temperature cracking when it is applied in the cold region. The stiffness of chemcrete modified mixtures is approximately 50 percent higher than that of conventional mixtures more than two years after the chemcrete modified mixture was applied in the base course.

• The Journal of Internal Korean Medicine
• /
• v.33 no.2
• /
• pp.126-144
• /
• 2012

Background : Peripheral nerves more rapidly recover than central nerves. However, it has been known that the degree of reaction of axons of peripheral nerves is affected by distinctive characteristics of axons and environmental factors near the axons. Taxol is a widely used medicine as for ovarian, breast, lung and gastric cancer. However it causes patients difficulties under treatment due to its toxic and side effects, which include persistent pain. Objectives : This study reviewed how SJT extract in vitro and in vivo affects nerve tissues of a sciatic nerve damaged by Taxol. It also studied how SJT extract in vivo affects axons of the sciatic nerve after the sciatic nerve was damaged by pressing. Methods : After vehicle, Taxol, and Taxol plus SJT were treated respectively for tissue of the sciatic nerve in vitro and then tissues were observed using Neurofilament 200, Hoechst, ${\beta}$-tubulin, $S100{\beta}$, caspase-3 and anti-cdc2. SJT was also oral medicated by injecting Taxol into the sciatic nerve of in vivo rats. Tissues of the sciatic nerve and axons of DRG sensory nerves were then observed using Neurofilament 200, Hoechst, ${\beta}$-tubulin, $S100{\beta}$, caspase-3 and p-Erk1/2. After inflicting pressing damage to the sciatic nerve of in vivo rats, tissues of the sciatic nerve and DRG sensory nerve were observed using Neurofilament 200, Hoechst, $S100{\beta}$, caspase-3, anti-cdc2, phospho-vimentin, ${\beta}1$-integrin, Dil reverse tracking and p-Erk1/2. Results : The group of in vitro Taxol plus SJT treatment had meaningful effects after sciatic nerve tissue was damaged by Taxol. The group of in vivo SJT treatment had effects of regenerating Schwann cells and axons which were damaged by Taxol treatment. The group of in vivo SJT had effects of regenerating axons in damaged areas after the sciatic nerve was damaged by pressing, and also had variations of distribution in Schwann cells at DRG sensory nerves and axons. Conclusions : This study confirmed that SJT treatment is effective for growth of axons in the sciatic nerve tissues and improvement of Schwann cells after axons of the sciatic nerve tissues was damaged. After tissues of sciatic nerve was damaged by pressing in vivo, SJT treatment had effects on promoting regeneration of axon in the damaged area and reactional capabilities in axons of DRG sensory nerves.

• Korean Security Journal
• /
• no.53
• /
• pp.109-133
• /
• 2017

The purpose of this study is to provide a general trends in recent terrorism in North America and Europe over the last five years. In particular the terrorism which occurred after 2012 shows the transition in trends as terrorists attacks civilians and public places(soft target) rather than targeting national facilities or specific people. For instance, the Parris terror attack and Barcelona vehicle attack shows this changes clearly. The terrorists appeared to attack ordinary people in urban places with high population density. Although the trends are changing, there are still few studies focusing on the current situation, and most of the previous studies have focused on changing in strategies and counter-terrorism in each country after the 9.11 terror. Meanwhile, studies examining the trends of terrorism have been limited to analyzing few cases or using relatively monolithic data of Global Terrorism Data(GTD). While the types of terrorism that occur recent years including 'new terrorism' in many respects, it seems to be difficult to classify with GTD data and/or case studies. Therefore, it is necessary to construct new data that perhaps grasp the recent trend of terrorism from different perspectives. In this point of view, this Based on this, this study collects terrorism data from North America and Europe for the past five years, by using the National Intelligence Service's annual report on terrorism as a sampling framework and analyse the trends and changes. The result shows similarities in the methods of attack, and the type of weapon they used. As vehicle attacks has been raised in few years, damage area has been widen and casualties also have been increased.

• Journal of Digital Convergence
• /
• v.20 no.4
• /
• pp.377-388
• /
• 2022

Metaverse, realistic virtual space technology has become a hot topic. However, due to the lack of an institutional system to the metaverse environment, concerns are rising over the leakage of industrial confidentiality, including digital assets produced, stored, processed, and transferred within the metaverse. Digital forensics, a technology to defend against hacking attacks in cyberspace, cannot be used in metaverse space, and there is no basis for calculating the extent of damage and tracking responsibility, making it difficult to respond to human resources leakage and cyberhacking effectively. In this paper, we define the scope of industrial confidentiality information and leakage scenario and propose policy and institutional measures based on problems in each metaverse scenario. As a result of the study, it was necessary to prepare a standardized law on Extra-territorial search and seizure issues and a system for collecting cryptocurrency evidence to respond to industrial confidentiality leaks in the metaverse. The study expects to contribute to industrial technology development by preparing in advance for problems that may arise in metaverse technology.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.25-25
• /
• 2022

Drought becomes frequent and severe because of continuous global warming, leading to a significant loss of crop yield. In soybean (Glycine max [L.]), most of quantitative trait loci (QTLs) analyses for drought tolerance have conducted by investigating yield changes under water-restricted conditions at the reproductive stages. More recently, the necessity of QTL studies to use physiological indices responding to drought at the early growth stages besides the reproductive ones has arisen due to the unpredictable and prevalent occurrence of drought throughout the soybean growing season. In this study, we thus identified QTLs conferring wilting scores and moisture contents of soybean subjected to drought stress in the early vegetative stage using an recombinant inbred line (RIL) population derived from a cross between Taekwang (drought-sensitive) and SS2-2 (drought-tolerant). For the two traits, the same major QTL was located on chromosome 10, accounting for up to 11.5% of phenotypic variance explained with LOD score of 12.5. This QTL overlaps with a reported QTL for the limited transpiration trait in soybean and harbors an ortholog of the Arabidopsis ABA and drought-induced RING-D UF1117 gene. Meanwhile, one of important features of plant drought tolerance is their ability to limit transpiration rates under high vapor pressure deficiency in response to mitigate water loss. However, monitoring their transpiration rates is time-consuming and laborious. Therefore, only a few population-level studies regarding transpiration rates under the drought condition have been reported so far. Via employing an Arduino-based platform, for the reasons addressed, we are measuring and recording total pot weights of soybean plants every hour from the 1^st day after water restriction to the days when the half of the RILs exhibited permanent tissue damage in at least one trifoliate. Gradual decrease in moisture of soil in pots as time passes refers increase in the severity of drought stress. By tracking changes in the total pot weights of soybean plants, we will infer transpiration rates of the mapping parents and their RILs according to different levels of VPD and drought stress. The profile of transpiration rates from different levels of severity in the stresses facilitates a better understanding of relationship between transpiration-related features, such as limited maximum transpiration rates, to water saving performances, as well as those to other drought-responsive phenotypes. Our findings will provide primary insights on drought tolerance mechanisms in soybean and useful resources for improvement of soybean varieties tolerant to drought stress.

• Journal of Radiation Protection and Research
• /
• v.48 no.4
• /
• pp.167-174
• /
• 2023

Background: A nondestructive test is commonly used to inspect the surface defects and internal structure of an object without any physical damage. X-rays generated from an electron accelerator or a tube are one of the methods used for nondestructive testing. The high penetration of X-rays through materials with low atomic numbers makes it difficult to discriminate between these materials using X-ray imaging. The interaction characteristics of neutrons with materials can supplement the limitations of X-ray imaging in material discrimination. Materials and Methods: The radiation image acquisition process for air-cargo security inspection equipment using X-rays and neutrons was simulated using a GEometry ANd Tracking (Geant4) simulation toolkit. Radiation images of phantoms composed of 13 materials were obtained, and the R-value, representing the attenuation ratio of neutrons and gamma rays in a material, was calculated from these images. Results and Discussion: The R-values were calculated from the simulated X-ray and neutron images for each phantom and compared with those obtained in the experiments. The R-values obtained from the experiments were higher than those obtained from the simulations. The difference can be due to the following two causes. The first reason is that there are various facilities or equipment in the experimental environment that scatter neutrons, unlike the simulation. The other is the difference in the neutron signal processing. In the simulation, the neutron signal is the sum of the number of neutrons entering the detector. However, in the experiment, the neutron signal was obtained by superimposing the intensities of the neutron signals. Neutron detectors also detect gamma rays, and the neutron signal cannot be clearly distinguished in the process of separating the two types of radiation. Despite these differences, the two results showed similar trends and the viability of using simulation-based radiation images, particularly in the field of security screening. With further research, the simulation-based radiation images can replace ones from experiments and be used in the related fields. Conclusion: The Korea Atomic Energy Research Institute has developed air-cargo security inspection equipment using neutrons and X-rays. Using this equipment, radiation images and R-values for various materials were obtained. The equipment was reconstructed, and the R-values were obtained for 13 materials using the Geant4 simulation toolkit. The R-values calculated by experiment and simulation show similar trends. Therefore, we confirmed the feasibility of using the simulation-based radiation image.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.715-728
• /
• 2023

Tracksite of pterosaurs, birds, and dinosaurs in Chungmugong-dong in Jinju was designated as a natural monument in 2011 and is known as the world's largest in terms of the number and density of pterosaur footprints. This site has been managed by installing protection buildings to conserve in 2018. About 17% of the footprints of pterosaur, theropod, and ornithopod in this site under management in the 2nd protection building are of great academic value, but observation of footprints has difficulties due to continuous physical and chemical damage. In particular, the accumulation of milk-white contaminants is formed by the gypsum and air pollutant complex. Gypsum remains evaporated with a plate or columnar shape in the process of water circulation around the 2nd protection building, and the dust is from through the inflow of the gallery windows. The aqueous solution of gypsum, consisting of calcium from the lower bed and sulfur from grass growth, is catchmented into the groundwater from the area behind the protection building. Pollen and a few minerals other constituents of contaminants, go through the gallery window, which makes it difficult to expel dust. To conserve the fossil-bearing beds from two contaminants of different origins, controlling the water and atmospheric circulation of the 2nd protection building and removing the contaminants continuously is necessary. When cleaning contaminants, the steam cleaning method is sufficiently effective for powder-shaped milk-white contaminants. The fossil-bearing bed consists of dark gray shale with high laser absorption power; the laser cleaning method accompanies physical loss to fossils and sedimentary structures; therefore, avoiding it as much as possible is desirable.

• Maritime Security
• /
• v.7 no.1
• /
• pp.31-60
• /
• 2023

This study proposes a new convergence weapon system that combines the covert placement and detection abilities of a self-propelled mobile mine with the rapid tracking and attack abilities of supercavitating rocket torpedoes. This innovative system has been designed to counter North Korea's new underwater weapon, 'Haeil'. The concept behind this convergence weapon system is to maximize the strengths and minimize the weaknesses of each weapon type. Self-propelled mobile mines, typically placed discreetly on the seabed or in the water, are designed to explode when a vessel or submarine passes near them. They are generally used to defend or control specific areas, like traditional sea mines, and can effectively limit enemy movement and guide them in a desired direction. The advantage that self-propelled mines have over traditional sea mines is their ability to move independently, ensuring the survivability of the platform responsible for placing the sea mines. This allows the mines to be discreetly placed even deeper into enemy lines, significantly reducing the time and cost of mine placement while ensuring the safety of the deployed platforms. However, to cause substantial damage to a target, the mine needs to detonate when the target is very close - typically within a few yards. This makes the timing of the explosion crucial. On the other hand, supercavitating rocket torpedoes are capable of traveling at groundbreaking speeds, many times faster than conventional torpedoes. This rapid movement leaves little room for the target to evade, a significant advantage. However, this comes with notable drawbacks - short range, high noise levels, and guidance issues. The high noise levels and short range is a serious disadvantage that can expose the platform that launched the torpedo. This research proposes the use of a convergence weapon system that leverages the strengths of both weapons while compensating for their weaknesses. This strategy can overcome the limitations of traditional underwater kill-chains, offering swift and precise responses. By adapting the weapon acquisition criteria from the Defense force development Service Order, the effectiveness of the proposed system was independently analyzed and proven in terms of underwater defense sustainability, survivability, and cost-efficiency. Furthermore, the utility of this system was demonstrated through simulated scenarios, revealing its potential to play a critical role in future underwater kill-chain scenarios. However, realizing this system presents significant technical challenges and requires further research.