• Structural Engineering and Mechanics
• /
• 제75권6호
• /
• pp.723-736
• /
• 2020

In this paper, acoustic emission (AE) and pattern recognition are utilized to identify the AE signal signatures caused by propagation of stress corrosion cracking (SCC) in a 304 stainless steel plate. The surface of the plate is under almost uniform tensile stress at a notch. A corrosive environment is provided by exposing the notch to a solution of 1% Potassium Tetrathionate by weight. The Global b-value indicated an occurrence of the first visible crack and damage stages during the SCC. Furthermore, a method based on linear regression has been developed for damage identification using AE data.

• 한국재료학회지
• /
• 제20권3호
• /
• pp.148-154
• /
• 2010

It is necessary to develop new methods to prevent catastrophic failure of structural material in order to avoid accidents and conserve natural and energy resources. Design of intelligent materials with a self-diagnosing function to prevent fatal fracture of structural materials was achieved by smart composites consisting of carbon fiber tows or carbon powders with a small value of ultimate elongation and glass fiber tows with a large value of ultimate elongation. The changes in electrical resistance of CF-GFRP/GFRP (carbon fiber and glass fiber-reinforced plastics/glass fiber-reinforced plastics) composites increased abruptly with increasing strain, and a tremendous change was seen at the transition point where carbon fiber tows were broken. Therefore, the composites were not to monitor damage from the early stage. On the other hand, the change in electrical resistance of CP-GFRP/GFRP (carbon powder dispersed in glass fiber-reinforced plastics/glass fiber-reinforced plastics) composites increased almost linearly in proportion to strain. CP-GFRP/GFRP composites are superior to CF-GFRP/GFRP composites in terms of their capability to monitor damage by measuring change in electrical resistance from the early stage of damage. However, the former was inferior to the latter as an application because of the difficulties of mass production and high cost. A method based on monitoring damage by measuring changes in the electrical resistance of structural materials is promising for improved reliability of the material.

• 한국작물학회지
• /
• 제53권spc호
• /
• pp.72-77
• /
• 2008

This study was carried out to determine the response of the rice yield and grain quality by rice leaf folder (RLF, Cnaphalocrocis medinalis G.) and identify the damages caused by different transplanting dates, nitrogen amounts and chlorophyll amounts (SPAD value) of rice leaf. As the damage degree of RLF was getting severer, the ripened grain rate and 1000-grain weight were decreased and due to the increasing of chalky rice rate the rate of head rice was reduced. Therefore, the yield of head rice was decreased by 36% in heavily damaged rice plant. Among the physicochemical characteristics, protein content of rice grain was increased but amylose content was reduced, consequently, the palatability was deteriorated in heavily damaged rice by RLF. The degree of damage of RLF was getting serious as transplanting date was delayed and as the amount of nitrogen was increased. In the relationship between the SPAD value and the damage degree of RLF, as the SPAD value was increased by nitrogen fertilizing, the damage degree was also increased exponential functionally.

• 한국농촌건축학회논문집
• /
• 제13권1호
• /
• pp.37-44
• /
• 2011

The maintenance works for brick-structured buildings are a new field in Korea, and practical cases are yet inadequate so that such works may cause adverse effects of damaging the buildings after all. Therefore, this study has extracted a preservation technology believed to be most desirable in minimizing the damage to the original state of the buildings and preserving the value as the cultural assets through maintenance work details from 1986 to 2010 regarding brick-structured buildings designated as cultural properties. Firstly, a brick replacement method of using the brick used at the time of construction is efficient in replacement and repair of brick material for preserving value of cultural assets and minimizing damage of the original form. Secondly, use of lime mortar through material analysis is effective in repair of masonry joint and mortar but it is not used often due to high experimental cost. Finally, reinforcement of structure using a form for a building with severe damage is most efficient when considering additional problems. However, damage on the original form of a building can be minimized and value of a building can be preserved only when consideration on sufficient case analysis, materials to be used, and conditions of a building is supported.

• 생약학회지
• /
• 제44권4호
• /
• pp.391-396
• /
• 2013

In this study, we investigated the effects of onion(Allium cepa L.) peel extraction aplication on UVB-induced damage of mouse skin. The male C57BL/6 weeks mice were divided into three groups; the control group(Con), the UVB irradiated group(UVB) and the group treated with onion peel extract after UVB irradiation(UVB+Onion peel). Onion peel extraction were topically treated after UVB irradiation(800 $mJ/cm^2$) to dorsal skin. We were measured TEWL, melanin value, erythema index and histological of mouse skin. In the TEWL, melanin value and erythema index observation, UVB+onion peel group were decreased then in the UVB group and 120 and 168 hr groups were similar to the control group. In the histological observation, UVB+onion peel group were indicated hyperkeratosis then in the UVB. These results showed that onion peel extract as a topical application may have preventive effect against UVB-induced skin damage. Therefore onion peel extract might be good material for UVB-damage skin care.

• 한국공작기계학회논문집
• /
• 제13권6호
• /
• pp.64-73
• /
• 2004

A fatigue damage accumulation model based on the continuum damage mechanics theory was developed where modulus decay ratios in tension and shear were used as indicators for damage variables D. In the model, the damage variables are considered to be second-order tensors. Then, the maximum principal damage variable, $D^*$ is introduced. According to the similarity to the principal stress, $D^*$ is obtained as the maximum eigen value of damage tensor [D]. Under proportional tension and torsion loadings, fatigue lives were satisfactorily predicted at any combined stress ratios using the present model in which the Fatigue characteristics only under uniaxial tension and pure torsion loadings were needed. Fatigue life prediction under uniaxial tension and pure torsion loadings, was performed based on the damage mechanics using boundary element method.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권2호통권54호
• /
• pp.231-242
• /
• 2009

통계적 구조물 손상진단에서 기저분포는 구조물에 손상이 없을 때 획득된 동적 응답 특성이 이루는 통계 분포이다. 일반적으로 구조물에 손상이 발생했을 때 손상에 민감한 구조물의 동적 응답 특성은 기저분포의 꼬리 부근에 주로 나타나게 된다. 최근 연구자들은 기저분포의 꼬리 부분을 정확하게 모사하기 위해 극치분포에 주목하고 있으나, 구조물 손상진단의 관점에서 극치분포의 이론적 이해에 대한 연구는 거의 이루어지지 않았다. 이 연구에서는 신뢰성 있는 통계적 구조물 손상진단을 위해 필요한 극치분포의 점근적 수렴성을 매개변수 추정법을 이용하여 규명한다. 특히, 극치 추출에 필요한 표본크기와 극치분포의 점근적 수렴성의 관계를 정량적으로 보인다. 또한, 극치분포 추정에서 표본크기와 통계적 구조물 손상진단에서 발생하는 손상오류경보 빈도에 대한 관계를 정량적으로 규명한다. 차량 이동하중을 받는 2경간 트러스 교량에서 수치해석 기법을 통해 모사된 가속도 데이터를 이용하여 제안된 기법의 타당성을 검증한다.

• 한국생산제조학회지
• /
• 제20권2호
• /
• pp.157-161
• /
• 2011

The study for traffic safety improvement is so necessary to minimize the wound of pedestrian at car impact as to prevent pedestrian from this accident. This study aims at analyzing the behavior affected by impact on which car body hits pedestrian. Load and damage of pedestrian are also investigated. This model is the small car body as frame structure. The pedestrian is modeled with dummy by CATIA as Korean standard body style. The ear impacts the side of pedestrian with the speed from 30 to 90km/h. Behavior and damage of pedestrian at impact are analyzed by ANSYS. In case of 30km/h, The maximum pressure of dummy becomes the maximum value of 100MPa after the elapsed time of 0.1second and then seems to remain at 105MPa constantly. In case of 60km/h, its pressure becomes the maximum value of 110MPa at the elapsed time of 0.05second and decreases at 90MPa until the elapsed time of 0.1second. This value fluctuates after the elapsed time of 0.1second. In case of 90km/h, its maximum pressure becomes the maximum value of 155MPa at the elapsed time of 0.07second and fluctuates after the elapsed time of 0.07second until O.3second. This value seems to remain at 100MPa constantly after 0.3second until 0.5second. But this pressure increases suddenly just after 0.5second. Maximum deformations of dummy increase linearly according to elapsed time at hitting velocities of 30, 60 and 90km/h.

• 대한기계학회논문집A
• /
• 제26권10호
• /
• pp.2122-2129
• /
• 2002

Creep damage using a reference stress(RS) was analyzed for type 316LN stainless steel. The generalized K-R equation was reconstructed into the RS equation using a critical stress value $\sigma$. The RS equation was derived from the critical stress in failure time $t_f$ instead of material damage parameter $\omega$, which indicates the critical condition of collapse or approach to gross instability of materials during creep. For obtaining the reference stress, a series of creep tests and tensile tests were conducted with at 55$0^{\circ}C$ and $600^{\circ}C$. The stress-time data obtained from creep tests were applied to the RS equations to characterize the creep damage of type 316LN stainless steel. The value of creep constant r with stress levels was about 18 at 55$0^{\circ}C$ and 21 at $600^{\circ}C$. This value was almost similar with r = 24 in the K-R equation, which was obtained by using damage parameter $\omega$. Relationship plots of creep failure strain and life fraction $(t_f /t_r)$ were also obtained with different λ values. The RS equation was therefore more convenient than the generalized K-R equation, because the measuring process to quantify the damage parameter $\omega$ such as voids or micro cracks in crept materials was omitted. The RS method can be easily used by designers and plant operator as a creep design tool.

• Earthquakes and Structures
• /
• 제9권4호
• /
• pp.851-873
• /
• 2015

A methodology for estimation of statistical properties (viz. mean and standard deviation) of the expected seismic damage to reinforced concrete framed structures subject to corrosion of reinforcement, over a specified reference time (typically the service life of the structure) is proposed in this paper. The damage to the structure under the earthquake loading is characterised by the damage index, determined using the modified Park and Ang damage model. The reduction in area, yield strength and strain at ultimate of steel reinforcement, and the reduction in compressive strength of cover concrete due to corrosion are taken into account in the estimation of damage. The proposed methodology is illustrated through an example problem. From the results obtained, it is noted that there is an increase of about 70% in the mean value of expected seismic damage to the reinforced concrete frame considered over a reference time of 30 years when effect of corrosion is taken into consideration. This indicates that there is a need to consider the effect of corrosion of reinforcement on the estimation of expected seismic damage.