• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.149-150
• /
• 2020

Granting self-sensing performance in a building is an important performance to ensure the degree of damage and safety of the building. Since the current research is being conducted in the state before deterioration loss occurs, it is necessary to confirm whether the self-sensing performance is maintained even in the damaged conductive cement composite. As part of the study, electrical resistance characteristics were analyzed in conductive cement composites in which freeze-thawing and chemical corrosion occurred. As a result, it was found that the change in electrical resistance value due to freeze-thawing was not as large as 1%, and chemical corrosion occurred. It was found that the change in electrical resistance value of the tested specimen increased by about 10%.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.3
• /
• pp.130-139
• /
• 2017

The crop damage caused by strong wind was predicted using the wind speed data available from Korean Meteorological Administration (KMA). Wind speed data measured at 19 automatic weather stations in 2012 were compared with wind data available from the KMA's digital forecast. Linear regression equations were derived using the maximum value of wind speed measurements for the three-hour period prior to a given hour and the digital forecasts at the three-hour interval. Estimates of daily maximum wind speed were obtained from the regression equation finding the greatest value among the maximum wind speed at the three-hour interval. The estimation error for the daily maximum wind speed was expressed using normal distribution and Weibull distribution probability density function. The daily maximum wind speed was compared with the critical wind speed that could cause crop damage to determine the level of stages for wind damage, e.g., "watch" or "warning." Spatial interpolation of the regression coefficient for the maximum wind speed, the standard deviation of the estimation error at the automated weather stations, the parameters of Weibull distribution was performed. These interpolated values at the four synoptic weather stations including Suncheon, Namwon, Imsil, and Jangsu were used to estimate the daily maximum wind speed in 2012. The wind damage risk was determined using the critical wind speed of 10m/s under the assumption that the fruit of a pear variety Mansamgil would begin to drop at 10 m/s. The results indicated that the Weibull distribution was more effective than the normal distribution for the estimation error probability distribution for assessing wind damage risk.

• Journal of Biosystems Engineering
• /
• v.5 no.2
• /
• pp.58-66
• /
• 1980

A survey was conducted to investigate the power tiller accidents. Eight provinces were covered for this study, and 278 power tiller owners were selected randomly by computer random generator. The results are summarized as follows : A. Frequency of accident. (1) Each power tiller had an accident 0.98 times a year and once every 361 hours of use. Higher frequency of accident was found during the miscellaneous operations including the preparation for farming operation, and there was one accident for every 92 hours of use. (2) The power tiller, which are more than six years old, met an accident 1.19 times a year , or one every 311 hours of use. This value was the highest one compared with any other group. (3) Kerosene engine power tillers met an accident 0.97 times a year, or one every 389 hours of use. It was one tie a year, or once every 329 hours of use for diesel engine power tillers. (4) Among diesel-engine power tillers, 10 horse-power group showed a higher frequency tillers. B. Cause of accident (1) The accidents of power tiller were mainly of sefety , which occurred due to the lack of attention during the operation and 47.4% of the total accidents. The next was of accidental, which represented 26.3% of the total accidents. (2) High percentage of safety accidents occurred during the preparation for farming operation including adjustment. Most of the accidental accidents occurred during the transportation. (3) Lower frequency of accident was found in the power tiller group which were operated by the 21-40 years old operator in comparison with that of the power tiller which was operated by other age group. Power tillers which were operated by high school graduates experienced less accidents compared to other education levels. C. Damage by accident (1) Eighty seven pescents of the total accidents caused damage to the power tiller operator , and 13 % of the total accidents caused property damage only. (2) With regard to the damage to the power tiller operator, 73.8% of the total accidents caused light injury but 26.3% caused heavy injury. (3) Accidents which occurred during machine preparation , and farming operations caused minor injury to the operator, but the accidents during transportation caused heavy injury which cost more than 15 days for recovery. (4) Among the 39 accidents , which caused property damage 18 accidents were from the transportation . Among the total property damage accidents 53.8% were light one which cost only less than 1,000 won. (5) The property damage from each accident cost 1,017 won, on the average, with regard to the kinds of operation, the highest property damage occurred during transportation work, with the value of 2, 965won.

• Environmental and Resource Economics Review
• /
• v.23 no.4
• /
• pp.689-718
• /
• 2014

This study analyzes the ripple effects on the national economy of the flood damage using a perfect foresight dynamic CGE model for 2010 as the base year in case that the flood damage reduces the capital of the relevant industrial sectors. The analysis is limited to the items of physical damage such as agricultural land, ships and public facilities, for which statistical data can be obtained. As flood damage scenarios we adopt the minimum, maximum and average value of flood damage's historical data over the period 1991~2010 for each item. The results show that the largest production decline happens to the industry of fishing and transport and the next largest to the agricultural and forestry industry. The GDP reduction in the base year turns out to be from 0.001 to 0.057 percent compared to the benchmark and 11 percent compared to the exogenous shock to capital stock. Dynamically, the GDP gradually decreases until the year of 2030, which shows the long-lasting impact on the national economy of flood damage via the chanel of the capital damage.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.68
• /
• pp.51-65
• /
• 2001

This study is to make LCIA(Life Cycle Impact Assessment) easier as a methodology of environmental scores(called E-score) that integrated environmental load of each emission substance based on environmental damage such as in human health, ecosystem and resources category. The concept is to analyzes the LCI(Life Cycle Inventory) and defines the level of environment damages for human health, ecosystem and resources to objective impact assessment standard, and makes the base of marginal damage to calculate the damage factor, which can present the indication that can establish the standard value of environmental impact. First, damages to human health are calculated by fate analysis, effect analysis and damage analysis to get the damage factor of health effect as a DALY(Disability Adjusted Life Years) unit. Second, damages to ecosystem are calculated by fate analysis, effect analysis and damage analysis to get the damage factor of the effect as a PDF(Potentially Disappeared Fraction) unit through linking potentially increased disappeared fraction. Third, damages to resources are carried out by resource analysis and damage analysis for linking the lower fate to surplus energy conception to get damage factor as a MJ(Mega Joule) unit. For the ranking of relative environment load level each other, LCIA can be carried out effectively by applying this E-score methodology to the particular emission substances. A case study has been introduced for the emission substances coming out of a tire manufacturer in Korea. It is to show how to work the methodology. Based on such study result, product-designers or producers now can apply the E-scores presented in this study to the substances of emission list, and then calculate the environment load of the product or process in advance at any time and can see the environment performance comparatively and expected to contribute to the environmental improvement in view of environmental pollution prevention.

• Smart Structures and Systems
• /
• v.18 no.3
• /
• pp.501-523
• /
• 2016

Electromechanical impedance (EMI) based structural health monitoring is performed by measuring the variation in the impedance due to the structural local damage. The impedance signals are acquired from the piezoelectric patches that are bonded on the structural surface. The impedance variation, which is directly related to the mechanical properties of the structure, indicates the presence of local structural damage. Two traditional EMI-based damage detection methods are based on calculating the difference between the measured impedance signals in the frequency domain from the baseline and the current structures. In this paper, a new structural damage detection approach by analyzing the time domain impedance responses is proposed. The measured time domain responses from the piezoelectric transducers will be used for analysis. With the use of the Time Frequency Autoregressive Moving Average (TFARMA) model, a damage index based on Singular Value Decomposition (SVD) is defined to identify the existence of the structural local damage. Experimental studies on a space steel truss bridge model in the laboratory are conducted to verify the proposed approach. Four piezoelectric transducers are attached at different locations and excited by a sweep-frequency signal. The impedance responses at different locations are analyzed with TFARMA model to investigate the effectiveness and performance of the proposed approach. The results demonstrate that the proposed approach is very sensitive and robust in detecting the bolt damage in the gusset plates of steel truss bridges.

• The Korea Journal of Herbology
• /
• v.29 no.5
• /
• pp.39-43
• /
• 2014

Objectives : The purpose of this sutdy was finding out the origin and daily dose of Allii Fistulosi Bulbus in Treatise on Cold Damage Diseases. Methods : In order to estimate the origin and daily dose of Allii Fistulosi Bulbus, I researched the Treatise on Cold Damage Diseases, Synopsis of Prescription of the Golden Chamber, Classified Emergency Materia Medica, Compendium of Materia Medica, and Huangdi's Internal Classic. Results : According to some important herbal textbooks, Allii Fistulosi Bulbus had no seed, was reproduced by rhizome, and its leaves were soft. Chongbaek in Treatise on Cold Damage Diseases did not include word 'raw'. The unit of the dose of it was the number of article. So Allii Fistulosi Bulbus in Treatise on Cold Damage Diseases was not Daepa but Jokpa, and was dried, and was round shaped bulb bigger than bean. The daily dose was 4, 9, 14 articles in Treatise on Cold Damage Diseases and Synopsis of Prescription of the Golden Chamber. These were estimated equal to 1, 2, 3 Ryang. 1 Ryang equals to 6.5 g in Treatise on Cold Damage Diseases, so the daily dose of Allii Fistulosi Bulbus was estimated 6.5 g, 13.0 g, and 19.5 g. I weighed the middle-sized Allii Fistulosi Bulbuses, the result was remarkably consistent with the estimated numerical value. Conclusions : In Treatise on Cold Damage Diseases, Allii Fistulosi Bulbus was dried bulb of Jokpa of Allium fistulosum Linn$\acute{e}$ and the daily dose was 4 or 9 articles, respectively equaled to 1 Ryang, 2 Ryang and 6.5 g, 13 g.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.11
• /
• pp.1577-1582
• /
• 2003

This study was conducted to determine the effects of prophylactic supplementation of vitamin E and Se on oxidative damage and antioxidant status. Fifteen healthy male buffalo (Bubalus bubalis) calves between the age of 6 to12 months were divided into three groups of five animals each: Group I-control, group II-endotoxic shock group infused with lyophilized E coli endotoxin @ 5 ${\mu}g$/kg body wt, and group III-supplemented with vitamin E @ 250 mg and Se @ 7.5 mg, one month prior to induction of endotoxic shock. All the animals in group II and group III exhibited signs of endotoxic shock. When the endotoxic shock was induced, there was significant (p<0.05) increase in the circulating levels of malonyl dialdehyde MDA (an indicator of lipid peroxidation). In the supplemented group III the magnitude of formation of MDA was also less as compared to group II at every stage of study. There was significant (p<0.05) decrease in circulating levels of SOD, GSH-Px, Catalase and G-6-PD activity from the normal (0 h) value with passage of time. As a result of endotoxic shock, these values reached a lowest value, and then showed a tendency towards the 0 h value. Prophylactic supplementation with vitamin E and Se was successful in reducing the quantum of oxidative damage due to formation of free radicals because of endotoxic shock.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.113-118
• /
• 2010

The split spectrum processing algorithm of an ultrasonic wave on the tire was studied for the damage detection of a driving vehicle's tire. The processing results of normal and damaged tire was compared using the split spectrum algorithm to estimate the maximum value. The result that used Auto-correlation in case of damaged tire, the damage feature point is detected during 81ms intervals at a speed of 100km/h and during 162ms periodicity at a speed of 50km/h. This results was meaned the possibility for the tire's damage decision by damaging material with using periodicity feature point of tire damage according to vehicle speed.

• Journal of the Korean Society of Safety
• /
• v.30 no.3
• /
• pp.7-12
• /
• 2015

CFRP composites are used as primary structural members in various industrial fields because their specific strength and specific stiffness are excellent in comparison to conventional metals. Their usage is expanding to high added-value industrial fields because they are more than 50% lighter than metals, and have excellent heat resistance and wear resistance. However, when CFRP composites suffer impact damage, destruction of fiber and interface delamination occur. This causes an unexpected deterioration of strength, and for this reason it is very difficult to ensure the reliability of the excellent mechanical properties. Therefore, for the destruction mechanism in bending with impact damage, this study investigated the reinforcement data regarding various external loads by identifying the consequential strength deterioration. Specimens were damaged by impact with a steel ball propelled by air pressure. Decrease in bending strength caused by the tension and compression of the impact side, and depending on the lamination direction of fiber and interface inside the specimen. From the bending test it was found that the bending strength reduced when the impact energy increased. Especially in the case of compression on the impact side, as tensile stress occurred at the damage starting point, causing rapid failure and a substantially reduced failure strength.