• 한국해양공학회지
• /
• 제13권3호통권33호
• /
• pp.100-107
• /
• 1999

Due to the high temperature and pressure, the materials of pipeline in power plant are degraded by creep damage. So far, many conventional measurement techniques such as replica method, electric resistance method, adn hardness test method for creep damage have been used. Among them, the replica method has mainly been used for the inspection of components. But this technique is restricted to the applications at the surface of the objects and cannot be used to material inside. In this paper, the measuring methods of evaluation by using ultrasonic attenuation and electric resistance for the creep detection of creep damage in the form of cavities on grain boundaries or intergranular microcracks were carried out. Absolute measuring method of quantitave ultrasonic attenuation technique for 1Cr0.5Mo material degradation was analyzed for determining the creep degradation steps using life prediction formula. As a result of measurement for creep specimens, we founded that the coefficient of utrasonic attenuation was increased as the increase of creep life fracton(${phi}c$) and the decreasing rate of wlwctric resistance was also increased.

• 대한기계학회논문집A
• /
• 제29권11호
• /
• pp.1480-1487
• /
• 2005

Metal matrix composites(MMCs) have been rapidly becoming one of the strongest candidates for structural materials fur many high temperature application. However, among the various high temperature environments in which metal matrix composites was applied, thermal shock is known to cause significant degradation in most MMC system. Due to the appreciable difference in coefficient of thermal expansion(CTE) between reinforcement and metal matrix, internal stresses are generated following temperature changes. Infernal stresses affect degradation of mechanical properties of MMC by causing microscopic damage in interface and matrix during thermal cycling. Therefore, the nondestructive evaluation on thermal shock damage behavior of SiC/A16061 composite has been carried out using ultrasonics. For this study, SiC fiber reinforced metal matrix composite specimens fabricated by a squeeze casting technique were thermally cycled in the temperature range 298$\~$673 K up to 1000cyc1es. Three point bending test was conducted to investigate the efffct of thermal shock damage on mechanical properties. The relationship between thermal shock damage behavior and the propagation characteristics of surface wave and SH-ultrasonic wave was discussed by considering the result of SEM observation of fracture surface.

• 한국구조물진단유지관리공학회 논문집
• /
• 제11권3호
• /
• pp.159-166
• /
• 2007

본 논문에서는 구조물의 건전성 평가를 위하여 지진하중을 받은 프레임 구조물의 응답 가속도를 웨이블렛펙킷 변환(Wavelet Packet Transform; WPT)을 이용하여 분해한 후 인공신경망을 이용하여 각 부재의 손상도를 평가하였다. 인공신경망에는 응답가속도의 분해된 성분 중 에너지가 가장 큰 5개의 성분이 입력 값으로 사용 되었는데 인공신경망의 출력층에 있는 2개의 노드는 각각 손상된 부재와 손상도를 나타낸다. 이 논문에서 제시된 방법을 이용하여 구조물의 손상된 부재와 손상도를 평가하였고 만족스러운 결과를 얻었다.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.90-98
• /
• 1999

Boiler high-temperature pipelines such as main steam pipe, header and steam drum in fossil power plants are degraded by creep damage due to severe operationg conditions like high temperature and high pressure for an extended period time. Such material degradation lead to various component faliures causing serious accidents at the plant. Conventional measurement techniques such as replica method, electric resistance method, and hardness test method have such disadvantages as complex preparation and measurement procedures, too many control parameters, and therefore, low practicality and they were applied only to component surfaces with good accessibility. In this study, both artificial creep degradation test using life prediction formula and frequency analysis by ultrasonic tests for their preparing creep degraded specimens have been carried out for the purpose of nondestructive evaluation for creep damage which can occur in high-temperature pipelline of fossil power plant. As a result of ultrasonic tests for crept specimens, we confirmed that the high frequency side spectra decrease and central frequency components shift to low frequency bans, and bandwiths decrease as increasing creep damage in backwall echoes.

• Computers and Concrete
• /
• 제11권6호
• /
• pp.541-569
• /
• 2013

There is a wide variety of existing Genetic Algorithms (GA) operators and parameters in the literature. However, there is no unique technique that shows the best performance for different classes of optimization problems. Hence, the evaluation of these operators and parameters, which influence the effectiveness of the search process, must be carried out on a problem basis. This paper presents a comparison for the influence of GA operators and parameters on the performance of the damage identification problem using the finite element model updating method (FEMU). The damage is defined as reduction in bending rigidity of the finite elements of a reinforced concrete beam. A certain damage scenario is adopted and identified using different GA operators by minimizing the differences between experimental and analytical modal parameters. In this study, different selection, crossover and mutation operators are compared with each other based on the reliability, accuracy and efficiency criteria. The exploration and exploitation capabilities of different operators are evaluated. Also a comparison is carried out for the parallel and sequential GAs with different population sizes and the effect of the multiple use of some crossover operators is investigated. The results show that the roulettewheel selection technique together with real valued encoding gives the best results. It is also apparent that the Non-uniform Mutation as well as Parent Centric Normal Crossover can be confidently used in the damage identification problem. Nevertheless the parallel GAs increases both computation speed and the efficiency of the method.

• 산업공학
• /
• 제21권4호
• /
• pp.365-377
• /
• 2008

In this paper, for constructing the Korean Hazard Information System (KHIS), we conceptually design a hazard evaluation process. We first deal with a hazard evaluation process focused on flood hazard to give the most immense damage and loss. The hazard evaluation process is consist of a damage evaluation process and a loss evaluation process, and is used for transforming hazards from natural disasters into economic measures. The proposed process is developed based on the famous FEMA (Federal Emergency Management Agency)'s $HAZAS^{@MH}$methodology. We modify the FEMA's process to be mutually exclusive and collectively exhaustive, that is all losses from the hazards are included into the estimation process but the losses are not duplicated in the process. In addition to this, we define the loss process specifically by considering the characteristics from the hazard environments of Korea. We can expect that KHIS for evaluating economic losses from natural hazards can be developed based on the conceptual design for the economic loss evaluation process, and KHIS can be used as a useful tool for analyzing the feasibilities of mitigation plans in central/local governments.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권6호
• /
• pp.11-20
• /
• 2013

5층 이하 비내진상세를 가지는 철근콘크리트 건축물의 지진시 긴급 위험도 평가를 위한 부재의 정량적 손상도 평가 기준을 제시하기 위하여 실대형 크기의 철근콘크리트 1층 1경간 골조 실험체의 정적실험을 실시하였다. 실험결과, 실험체는 기둥의 휨항복후 전단파괴에 의하여 파괴되었으며, 기둥과 접합부에 균열, 압괴 등의 손상이 발생한 반면, 보에는 균열 등의 손상이 거의 발생하지 않았다. 이와 같이 비내진상세를 가지며 휨항복후 전단파괴하는 철근콘크리트 기둥의 손상도를 5단계로 분류하고 손상단계별 한계상태를 평가하기 위한 정량적 기준으로서 지진시 상대적으로 측정이 용이한 잔류 층간변형각과 잔류 균열폭을 이용하였다. 손상한계상태의 잔류 층간변형각 및 잔류 균열폭은 실험결과에 따른 손상한계상태의 최대 층간변형각과의 관계에 의하여 결정하였으며, 한계 최대 층간변형각은 실험결과에 의한 부재의 하중-변형 관계 및 손상발생 현황을 바탕으로 결정하였다. 한계 잔류 층간변형각은 해당 최대 층간변형각에 의한 잔류 층간변형각 중의 최대값 이상이 되도록 하였으며, 한계 잔류 균열폭은 해당 최대 층간변형각에 의한 잔류 전단균열폭의 최소값 및 잔류 휨균열폭의 평균값으로 결정하였다. 한편, 본 논문을 통하여 제시한 손상한계상태의 잔류 층간변형각과 잔류 균열폭은 지진으로 동일한 부재 변형이 발생할 경우 내진설계가 실시된 부재를 대상으로 하는 국외 손상도 평가 기준에 의한 값보다 작은 것으로 나타났다.

• 콘크리트학회논문집
• /
• 제14권5호
• /
• pp.750-758
• /
• 2002

콘크리트가 하중에 의해 변형을 일으키고, 변형이 허용범위에 있어도 콘크리트 자체가 비균질한 재료이기 때문에 미세한 손상을 받는다. 미세한 손상이 누적되면, 균열로 나타나고 최종적으로 파괴된다. AE의 핵심특성은 육안관찰로 확인할 수 없는 미세한 손상을 검출하고 평가할 수 있으며, 이는 기존의 폭정방법으로부터 확연히 구분되는 강점이다. 본 연구에서는 AE기법을 이용하여 콘크리트의 손상도 해석 및 평가를 수행하였다. 손상도 해석결과에 의하면, 원주형 시험체의 경우, 고강도 콘크리트일수록 낮은 응력비에서 손상을 더욱 많이 받음을 확인할 수 있었고, 이것은 취성성질을 반영한 AE기법만의 평가결과이다. 또한, 철근콘크리트 휨시험체에서는 카이저효과 및 펠리시티효과가 분명히 존재함을 확인할 수 있었고, 철근과 콘크리트의 계면분리시점은 펠리시티비, AE 활동성 및 재하이력을 상호비교함으로써 평가 가능함을 확인하였다. 본 연구 결과로부터 펠리시티비(FR)를 이용하면, 철근콘크리트 구조물의 성능저하정도 평가가 가능할 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.3.1-11
• /
• 2003

Recently the problems related to the failure of the retaining wall structure has become great concern since the damage to the properties and human losses have occurred in the rainy season. However, a detail guideline on safety inspection and appropriate diagnosis on the retaining wall structure have not yet proposed and therefore, the inspection process and results are mainly dependant upon the engineers. The objective of this study is to propose objective and quantitative evaluation method for the condition based on the damage shapes and material types. In this purpose, composing materials of retaining wall are divided Into concrete, gabion, stone and reinforced earth, and then the evaluation items and method are suggested on the basis of the materials and structural characteristics of the retaining wall.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제4권1호
• /
• pp.31-37
• /
• 2001

In this paper, an integrated damage identification system (IDIS) is proposed to locate and size damage in real structures. The application of the IDIS to real structures includes the measurement of modal responses, the construction of damage-detection models, and the implementation of measurements and models into the damage-detection process. Firstly, the theory of the damage identification method is outlined. Secondly, the schematic and each component of the IDIS are described. Finally, the practicality of the IDIS is verified from experiments on two different bridge-models, a model plate-grider and a model truss.