• 제목/요약/키워드: DY

검색결과 578건 처리시간 0.038초

Preparation of Kimchi Containing Bifidobacterim animalis DY-64

  • Chae Myoung-Hee;Jhon Deok-Young
    • Journal of Microbiology and Biotechnology
    • /
    • 제16권3호
    • /
    • pp.431-437
    • /
    • 2006
  • Aero-tolerant microorganisms were isolated from healthy Koreans over the age of 95 years. The microorganisms were then identified based on their morphological and biochemical characteristics and 16S rDNA sequences. The growth properties of the isolated strains were investigated in kimchi. The characteristics of kimchi containing the microorganisms were studied microscopically, physicochemically, and organoleptically. Among 7 aero-tolerant strains, a strain with a 16S rDNA sequence exhibiting 99% homology with Bifidobacterim animalis strain B83 was selected and named B. animalis DY-64. The new strain showed a better acid resistance and salt resistance (p<0.05) than B. animalis ATCC 25527. After 15 days of fermentation in kimchi, the viability of B. animalis DY-64 was about 10%, and the kimchi had a better overall edible quality than conventional kimchi. Thus, it was found that the application of B. animalis DY-64 to kimchi preparation produced a good overall edible quality.

상압소경에 의해 제조된 DyNbO4 소결체의 미세조직과 파괴특성 (Microstructures and Fracture Characteristic of Pressureless-Sintered DyNbO4 body)

  • 김기만;안종관;이병택
    • 한국분말재료학회지
    • /
    • 제9권3호
    • /
    • pp.148-152
    • /
    • 2002
  • The microstructures and indentation fracture of pressureless-sintered $DyNbO_4$ crystalline were investigated as a basic study for the application of weak phase of fibrous monolithic composites. They were comprised with many lamella twins as well as micro-cracks at the grain boundaries. The hardness at room temperature was remarkably low value(575 Hv) due to the low relative density and existence of microcracks at grain boundaries. The main fracture mode was a typical intergranular fracture, and showed remarkable micro-cracking effect. The heavy plastic deformation was observed around the site of indentation. In addition, the $DyNbO_4$ was expected to apply as a weak phase in the fibrous monolithic composites because of the low hardness and easily plastic deformation that could be led the preferable pulled-out and microcracking toughening under the failure.

Flux Growth of $CoFe_{1.9}Dy_{0.1}O_4$ Single Crystals and its Magnetic Properties

  • Kambale, Rahul C.;Song, K.M.;Hur, Namjung
    • 한국자기학회:학술대회 개요집
    • /
    • 한국자기학회 2011년도 임시총회 및 하계학술연구발표회
    • /
    • pp.19-19
    • /
    • 2011
  • We studied the effect of Dy content on the magnetic properties of cobalt ferrite single crystal. The $CoFe_{1.9}Dy_{0.1}O_4$ single crystals were grown by the flux method by using $Na_2B_4O_{7.}10H_2O$ (Borax) as a solvent (flux). The black and shiny single crystals were obtained as a product. The X-ray diffraction test at room temperature confirmed the spinel cubic symmetry with lattice constant a = $8.42{\AA}$ of the single crystals. The presences of constitute elements (Co, Fe and Dy) was endorsedby EDAX analysis. The saturation magnetization (Ms) of $CoFe_{1.9}Dy_{0.1}O_4$ single crystals was measured and is found to be 72emu/g or equivalently $3.2{\mu}B$/f.u. at 300 K. The observed Ms and coercivity (Hc) is found to be lower than that of pure $CoFe_2O_4$.

  • PDF

ZnO-$Pr_{6}O_{11}$-CoO-$Cr_{2}O_{3}-Dy_{2}O_3$계 바리스터의 d.c. 스트레스에 따른 안정성에 관한 연구 (A Study on the Stability of ZnO-$Pr_{6}O_{11}$-CoO-$Cr_{2}O_{3}-Dy_{2}O_3$-Based Varistors with d.c. Stress)

  • 윤한수;류정선;남춘우
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 C
    • /
    • pp.1670-1672
    • /
    • 2000
  • The stability of ZnO-$Pr_{6}O_{11}$-CoO-$Cr_{2}O_{3}-Dy_{2}O_3$ based varistors with d.c. stress were investigated. ZnO varistor doped with 4.0 mol% $Dy_{2}O_3$ exhibited the highest nonlinear exponet, but stability was very poor because of low density. In particular, the varistor containing 0.5 mol% $Dy_{2}O_3$ showed very excellent V-I characteristic, which the nonlinear exponent was 67.39 and leakage current was 1.18 ${\mu}A$, and high stability.

  • PDF

Improvement of Demagnetization by Rotor Structure of IPMSM with Dy-free Rare-Earth Magnet

  • Imamura, Keigo;Sanada, Masayuki;Morimoto, Shigeo;Inoue, Yukinori
    • Journal of international Conference on Electrical Machines and Systems
    • /
    • 제2권2호
    • /
    • pp.141-147
    • /
    • 2013
  • Permanent magnet (PM) motors that employ rare-earth magnets containing dysprosium (Dy) are used in electric and hybrid electric vehicles. However, it is desirable to reduce the amount of Dy used since it is expensive. This study investigates the rotor structure of a PM synchronous motor with a Dy-free rare-earth magnet. Flux barrier shapes and PM thicknesses that enhance the irreversible demagnetization are investigated. In addition, a rotor structure that improves the irreversible demagnetization is proposed. We demonstrate that the proposed rotor structure without Dy improves the irreversible demagnetization.

Na와 Dy 이온 첨가에 따른 MgWO4 형광체의 광학 특성

  • 김문주;강희승;박다정;조선욱
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.199-199
    • /
    • 2016
  • 본 연구에서는 고상반응법을 사용하여 제조한 MgWO4:Dy,Na 형광체의 광학특성과 결정구조를 조사하였다. Fig.1 XRD 주 피크는 $23.9^{\circ}$에서 관측 되었으며 (110) 면에서 발생한 회절신호이다. 결정구조는 단사정계임을 알 수 있었다. Dy,Na의 함량비를 0 mol, 0.02 mol, 0.04 mol, 0.06 mol, 0.08 mol, 0.10 mol로 변화시켜 합성했으나, 함량비와는 관계없이 동일한 XRD 회절 피크 패턴이 관측되었다. Fig.2. 그림의 220-340 nm에서 관찰되는 넓은 밴드는 $O2-{\rightarrow}W6+$에 의해 발생한 LMCT(ligand to metal charge transfer)이고, Dy에서 WO42- 그룹으로 에너지 전달에 의해서 생긴 CTB 이다. 합성한 형광체를 295 nm로 여기 시킨 모든 형광체 분말의 발광 스펙트럼은 Dy 이온의 $4F9/2{\rightarrow}6H15/2$ 전이에 의한 487 nm, $4F9/2{\rightarrow}6H13/2$ 전이에 의한 577 nm, $4F9/2{\rightarrow}6H11/2$ 전이에 의한 668 nm의 발광 스펙트럼이 관측되었다. Dy 이온이 0.02 mol일 때, 발광 세기가 가장 강하였으며, 몰 비가 증가함에 따라 발광의 세기는 감소하는 농도 소광현상이 관측되었다.

  • PDF

HD 처리 및 열처리공정 개선에 의한 (Nd, Dy)-Fe-B 소결자석의 자기특성 향상 (Improvement of the Magnetic Properties of (Nd, Dy)-Fe-B Sintered Magnets by Modification of HD and Annealing Processes)

  • 남궁석;이연호;김문갑;장태석
    • 한국분말재료학회지
    • /
    • 제17권5호
    • /
    • pp.359-364
    • /
    • 2010
  • In an attempt to optimize the magnetic properties of (Nd, Dy)-Fe-B sintered magnets, hydrogenation and post-sintering heat treatment processes were investigated at various hydrogenation temperatures and heat treatment temperatures. The coercivity of (Nd, Dy)-Fe-B sintered magnets hydrogenated at $400^{\circ}C$ increased to about 1.2 kOe without any detrimental effect on the remanence. Moreover, the coercivity of the magnets was enhanced further by a consecutive $2^{nd}$ and $3^{rd}$ step heat treatment. These results eventually leaded to the reduction of the Dy content in a high coercive (> 30 kOe) (Nd, Dy)-Fe-B sintered magnets, as much as 10%.

BaTiO3 세라믹 내 희토류(Dy, Y, Ho) 첨가 효과 (The Doping Effects of Intermediate Rare-earth Ions (Dy, Y and Ho) on BaTiO3 Ceramics)

  • 박금진;김창훈;김영태;허강헌
    • 한국세라믹학회지
    • /
    • 제46권2호
    • /
    • pp.181-188
    • /
    • 2009
  • The electrical property and microstructure in $BaTiO_3$ ceramics doped rare-earth ions with intermediate ionic size ($Dy^{3+},Ho^{3+},Y^{3+}$) were investigated. Microstructures have been characterized using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). Incorporation of rare-earth ions to $BaTiO_3$ ceramics depended on their ionic radius sensitively. Compared to Ho and Y ions, Dy ions provide $BaTiO_3$ ceramics with the high rate of densification and well-developed shell formation, due to their high solubility in the $BaTiO_3$ lattice, but the microstructure of Dy doped $BaTiO_3$ ceramics is unstable at high temperature, because Dy ions could not play a role of grain growth inhibition, leading to diffuse into $BaTiO_3$ lattice continuously after completion of densification during sintering. Comparing electrical property and microstructure, it is shown that the reliability of capacitor improved by high shell ratio.

$ZnO-Pr_{6}O_{11}$계 바리스터 세라믹스의 직류가속열화 특성 (DC Accelerated Aging Characteristics of $ZnO-Pr_{6}O_{11}$ Based Varistor Ceramics)

  • 김향숙;남춘우
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
    • /
    • pp.330-333
    • /
    • 2002
  • The stability against DC accelerated aging stress of $Dy_{2}O_{3}-doped$ $ZnO-Pr_{6}O_{11}-based$ varistor ceramics was investigated. The calculated nonlinear exponent$(\alpha)$ in varistor ceramics without $Dy_{2}O_{3}$ was only 4.9, whereas the $\alpha$ value of the varistors with $Dy_{2}O_{3}$ was abruptly increased in the range of 48.8 to 58.6. The varistor ceramics with $Dy_{2}O_{3}$ content of 1.0 mol% exhibited maximum ${\alpha}$, reaching 58.6, whereas they exhibited very poor stability. While, The varistor ceramics doped with 0.5 mol% $Dy_{2}O_{3}$ exhibited not only the high nonlinearity, which the ${\alpha}$ is 55.3 and the leakage current is $0.1{\mu}A$, but also the highest stability, which the variation rates of varistor voltage and nonlinear exponent are -0.8% and -14.3%, respectively, under DC accelerated aging stress, $0.95 V_{1mA}/150^{\circ}C/24h$.

  • PDF

폴리머 매트릭스를 전구체로 사용한 SrAl2O4:Eu2+,Dy3+ 축광성 형광체의 합성 및 형광 특성 (Synthesis and Photo Luminescent Characteristics of SrAl2O4:Eu2+,Dy3+ Phosphor using Polymer Matrix)

  • 김수종;권혁실
    • 한국전기전자재료학회논문지
    • /
    • 제20권8호
    • /
    • pp.671-679
    • /
    • 2007
  • [ $SrAl_2O_4:Eu^{2+},\;Dy^{3+}$ ] phosphor was synthesized using the impregnation method, and its photoluminescence and long-afterglow properties were investigated, A mixture of $Sr(NO_3)_2,\;Al(NO_3)_2\;9H_2O,\;EuCl_3\;6H_2O,\;DyCl_3\;6H_2O,\;NdCl_3\;6H_2O$ salts were dissolved in distilled water and impregnating into the polymer precursor. After drying, the impregnated mixture was heat treated at $900-1400^{\circ}C$ for 2h in a $N_2-H_2$ reduction atmosphere. The microstructure and crystal structure of the $SrAl_2O_4:Eu^{2+},\;Dy^{3+}$ powders were examined by scanning electron microscopy and X-ray diffraction, respectively. The photoluminescence spectra showed an excitation band along over wide wavelength of 250-450nm, and a broaden emission with a maxima peak at 360nm. In addition, the spectra also showed a good long after glow that decayed over a 1000sec period after 10 min excitation illumination.