• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.2
• /
• pp.102-108
• /
• 2008

AC generator plays an important role of power system. The large AC generator fault may lead to large impacts or perturbations in power system. And then the protection of a generator has very important role in maintaining stability in a power system. In present, the DFT(discrete Fourier transform) based RDR(ratio differential relay) had been widely applied to a internal fault of a generator stator winding. But DFT has a serious drawback. In the course of transforming a target signal to frequency domain, time information is lost. DWT uses a time-scale region. This paper proposes an advanced fault detection algorithm using DWT(discrete Wavelet transform) to enhance the drawback of conventional DFT based relaying. To evaluate the performance of the proposed relaying, we used the test data which were sampled with 720 [Hz] per cycle and obtained from ATP(alternative transient program) simulation. And we made a comparative study of conventional DFT based RDR and the proposed relaying.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.3 no.3
• /
• pp.45-50
• /
• 2010

In this study, Discrete Wavelet Transform(DWT), which can detect more correct QRS complex, approximated through impulse response for reducing complexity to suit real-time system during exercise. Also, rhythm information, which is Arrythmia, Bradycardia and Tachycardia, is provided through continuously monitoring QRS complex. Proposed algorithm is evaluated by computer simulation of ECG signal that is measured during exercise.

• Journal of Korea Multimedia Society
• /
• v.17 no.2
• /
• pp.113-123
• /
• 2014

Electrophysiological recordings are considered a reliable method of assessing a person's alertness. Sleep medicine is asked to offer objective methods to measure daytime alertness, tiredness and sleepiness. As EEG signals are non-stationary, the conventional method of frequency analysis is not highly successful in recognition of alertness level. In this paper, EEG signals have been analyzed using wavelet transform as well as discrete wavelet transform and classification using statistical classifiers such as euclidean and mahalanobis distance classifiers and a promising method SVM (Support Vector Machine). As a result of simulation, the average values of accuracies for the Linear Discriminant Analysis (LDA)-Quadratic, k-Nearest Neighbors (k-NN)-Euclidean, and Linear SVM were 48%, 34.2%, and 86%, respectively. The experimental results show that SVM classification method offer the better performance for reliable classification of the EEG signal in comparison with the other classification methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.11
• /
• pp.993-1000
• /
• 2012

In this research, we proposed an efficient VLSI architecture of the lifting-based 2D DWT (Discrete Wavelet Transform) filter with 100% hardware utilization. The (9,7) filter structure has been applied and extendable to the filter length. We proposed a new block-based scheduling that computes the DWT for the lower levels on an "as-early-as-possible" basis, which means that the calculation for the lower level will start as soon as the data is ready. Since the proposed 2D DWT computes the outputs of all levels by one row-based scan, the intermediate results for other resolution levels should be kept in storage such as the Data Format Converter (DFC) and the Delay Control Unit (DCU) until they are used. When the size of input image is $N{\times}N$ and m is the filter length, the required storage for the proposed architecture is about 2mN. Since the proposed architecture processes the 2D DWT in horizontal and vertical directions at the same time with 4 input data, the total period for 2D DWT is $N^2(1-2^{-2J})/3$.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.1
• /
• pp.59-68
• /
• 2000

This paper proposes efficient VLSI architectures for computation of the 2- D discrete wavelet transform (DWT). The two proposed VLSI architectures for the 2- D DWT are constructed based on block-based computation Each $M{\times}N$ ($N{\times}M$) block DWT is performed along the row (column) direction simultaneously, where M and N denote the number of filter taps and the number of columns (rows), respectively The proposed architectures compute the lowpass and highpass output sequences of the 1 - DWT along the row and column directions using a single architecture In alternate clock cycles Therefore the extra processing units required for the proposed architectures are much smaller than those of the conventional architectures They are modeled In very high speed Integrated circuit hardware description language (HIDL) and Simulated to show their functional validity.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.883-886
• /
• 2003

본 논문에서는 Lifting-Based Scheme을 이용한 DWT(Discrete Wavelet Transform) 의 개선된 행 처리기의 구조를 제안 하였다. 제안된 행 처리기는 3개의 Adder 와 2개의 shifter를 사용 하였고 dual-port RAM을 사용하여 파이프 라인 구조를 취하여 각 클럭마다 열처리기에서 사용할 데이터를 발생 한다. 이러한 행 처리기의 파이프 라인 구조를 개선하여 Adder를 줄이고 행 처리기의 이용률을 최대로 하여 하드웨어의 공간적 비용 절감 효과를 가져 왔다. 제안된 구조는 Verilog를 사용하여 RTL설계를 한뒤 시뮬레이션으로 그 동작을 확인 하였다.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.491-494
• /
• 1999

Introduction of digital communication network such as Integrated Services Digital Networks(ISDN) and digital storage media have rapidly developed. Due to a large amount of image data, compression is the key techniques in still image and video using digital signal processing for transmitting and storing. Digital image compression provides solutions for various image applications that represent digital image requiring a large amount of data. In this paper, the proposed DWT(Discrete Wavelet Transform) filter bank is consisted of simple architecture, but it is efficiently designed that a user obtain a wanted compression rate as only input parameter. If it is implemented by FPGA chip, the designed encoder operates in 12MHz.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.16-18
• /
• 2001

DWT(Discrete Wavelet Transform) 연산을 하는데 있어서, 가장 많은 연산을 수행하는 부분은 계수(Coefficient)값과 입력값의 내적 연산을 하는 부분이다. 내적 연산을 효율적으로 줄이기 위해서 시스톨릭, 파이프라인, 병렬구조등이 연구되었으나, 이러한 기존의 방법들은 내적 연산에 들어가는 곱셈의 수는 줄이지 못했다. 본 연구에서 가산기 기반 분산연산을 이용하여 곱셈연산을 제거하고, 동일한 연산과정을 공유함으로써 가산기의 수를 최대한 줄일 수 있었다. 또한, 한 개의 1-레벨 분해 모듈을 재사용하기 위해서 스케줄링을 사용하였다. 그 결과 기존의 구조보다 게이트 수를 50%이상 줄일 수 있었으며, 속도의 향상을 얻을 수 있었다.

• International Journal of Computer Science & Network Security
• /
• v.23 no.4
• /
• pp.39-47
• /
• 2023

This study compares various transformation techniques for multifocus image fusion. Multi-focus image fusion is a procedure of merging multiple images captured at unalike focus distances to produce a single composite image with improved sharpness and clarity. In this research, the purpose is to compare different popular frequency domain approaches for multi-focus image fusion, such as Discrete Wavelet Transforms (DWT), Stationary Wavelet Transforms (SWT), DCT-based Laplacian Pyramid (DCT-LP), Discrete Cosine Harmonic Wavelet Transform (DC-HWT), and Dual-Tree Complex Wavelet Transform (DT-CWT). The objective is to increase the understanding of these transformation techniques and how they can be utilized in conjunction with one another. The analysis will evaluate the 10 most crucial parameters and highlight the unique features of each method. The results will help determine which transformation technique is the best for multi-focus image fusion applications. Based on the visual and statistical analysis, it is suggested that the DCT-LP is the most appropriate technique, but the results also provide valuable insights into choosing the right approach.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.12
• /
• pp.561-566
• /
• 2005

This paper introduces a compression technique for power qualify disturbance signal via discrete wavelet transform(DWT). The proposed approach is based on a previous estimation of the stationary component of power quality disturbance signal, so that it could be subtracted from the original signal in order to reduce a dynamic range of signal and generate transient events signal, which is subsequently applied to the compression technique. The compression techniques is performed through the difference signal decomposition, thresholding of wavelet coefficients, and signal reconstruction. It presents the relation between compression efficiency and threshold. It shouts that the wavelet transform leads to a power quality data compression approach with high compression efficiency, small compression error and good de-nosing effect.