• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.462-463
• /
• 1996

This study describes the dissipation factor measuring techniques of insulating oil on the operating, transformer by using digital signal processing. After applying voltage to the sensor which is installed in a transformer, acquiring source voltage and current of sensor and using cross-correlation techniques, we can check the dissipation factor of insulating oil. To improve measuring accuracy and the speed of process, we use hardware such as TMS320C31 DSP board and analog filter and software such as fast cross-correlation techniques, rectangular window, and digital filtering techniques. We simulated the measuring accuracy and the degree of the noise effect of this new measuring techniques by computer simulation, and compared the simplified measuring devices with Schering Bridge on degraded insulating oil. The result showed that this measuring technique can be used as diagnostic method on the pole transformers.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.163-166
• /
• 2001

본 논문에서는 ITS(Intelligent Transportation System) 기술중의 하나인 차량 충돌 방지 시스템의 신호처리부를 설계 구현하였다. 제안된 시스템은 FMCW (Frequency Modulated Continuous Wave)방식의 770Hz 밀리미터파 레이더를 기준으로 파라미터 값을 설계하여 거리와 속도를 실시간 검출하도록 구현되었다. 제안된 시스템은 TI사의 TMS320C31-40 DSP 와 AT89C52 Bbit 마이크로프로세서로 구현되어 10Hz 이상의 갱신율, 0.2m의 거리 분해능 및 2knvh의 속도 분해능을 제공하고 있다. 실험 환경으로 주파수 발생기(Function Generator)에서 비트주파수(Beat Frequency)를 생성하여 동작을 확인하였다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.31-40
• /
• 2019

This paper proposes an adaptive PCIe system for TI C66x DSPs. Conventionally, the PCIe system provided by the C66x is a system dependent on the structure in which the primary core writes an application to the DSP memory through the PCIe interface, then activate the secondary core. Due to the dependency between the cores, when developing a project using a PCIe interface, the remaining cores have to be programmed with a concern of the primary core used as the PCIe interface. Therefore, in order to de-couple the connections among the cores, an adaptive PCIe system is proposed, in the paper, in which the cores operate independently compared to the conventional system. Since the core used as the PCIe interface only runs PCIe related operations in the new system, the remaining cores can be fully utilized without concerning the connections with the core for PCIe interface. In order to verify the feasibility of the proposed adaptive PCIe system, the implementations of LTE-A down link, and IEEE 802.11ac are carried out using the evaluation board which includes a TMS320C6670 chip. Altogether, these results support that we demonstrated that the digital signal processing systems with the PCIe Interface can be developed more rapidly by applying the proposed system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.969-972
• /
• 2000

In this paper, a controller design for brushless linear motor is proposed. The designed controller is mainly composed of speed and current controller, which are carried out by the high-speed digital signal processor(DSP). In addition the PWM inverter is controlled by space voltage PWM method. This system is implemented using by 32-bit DSP(TMS320C31), a high-integrated logic device(EPM7128), and IPM(Intelligent Power Module) for compact and powerful system design. The experimental results show the effective performance of controller for the brushless linear motor.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.7
• /
• pp.22-28
• /
• 1998

This paper includes AC servo motor speed control usig the predictive control strategy. Generally, AC servo motor control should have the fast response characteristics. For the issue, sliding mode control and PID control have been applied. However, the former has the speed ripple response due to the chattering and the latter requires the many trial efforts. Originally, the predictive control which has been used in process control area does not need the priori knowledge for the application system and it is easy to compute the optimal gain with the prediction. In this paper, the TMS320C31 DSP pocessor is used for AC motor control with fst dynamics and the tuning guid-line for the parameters of the predictive control algorithm is given in order to reduce the computation load. Also, the actuator saturationis implemented uisngthe QP(Quadratic Programming) method and the transient response is improved by the identified intertia coefficient when AC motor is drived at forward/reverse rotation.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.1
• /
• pp.48-53
• /
• 2000

In this paper, we develop a TMS320C31 (60MHz) digital signal processor (DSP) board to synthesize gradient waveforms for Spiral Scan Imaging (SSI), which is one of the ultra fast magnetic resonance imaging (MRI) methods widely used. In SSI, accurate gradient waveforms are very essential to high quality magnetic resonance images. For this purpose, sampling rate for synthesizing the gradient waveforms is set twice as high as the data sampling rate. With the developed DSP boards accurate gradient waveforms are obtained. Ultra fast spiral scan imaging with the developed with the developed DSP board is currently under development.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.645-650
• /
• 2000

this paper deals with HVDC Light(High Voltage Direct Current) system using space vector PWM(SVPWM) method. Because the system of this paper has d-q control scheme for HVDC Light system. HVDC Light system represented in this paper is capable of controlling active and reactive power independently. For this system. V-I curve and control methods are proposed. Also this paper describes the design of a digital system for applications in power converters such as those that would be used in the next generation of HVDC system. Finally HVDC system is implemented using DSP TMS320C31

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.08a
• /
• pp.442-445
• /
• 1998

TMS320C31 DSP를 사용하여 다채널 음성신호를 실시간으로 압축/저장 및 재생 시스템을 구현하였다. 각각의 전화선으로부터 입력되는 DAM성신호는 실시간으로 VSELP 음성 부호화 알고리즘을 이용하여 8Kbps 의 전송률로 압축된다 압축 음성 데이터는 host computer 로 전송되어 각각의 채널별로 HDD 나 MOD 같은 저장 장치에 저장되어진다. PC microsoft windows95 환경에서 동작하는 호스트프로그램은 압축 음성 데이터를 하드 디스크나 광자기 디스크에 저장하고, 저장된 압축 음성 데이터는쉽게 검색하여 재생이 가능하다.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.340-343
• /
• 1995

This paper consists of the position control of induction motor using Generalized Predictive Control. Full order flux observer is also used for the purpose of estimating rotor fluxes. By using Generalized Predictive Control algorithm, the improved position control is realized in this paper. The proposed control method has been implemented by a 32 bit floating point TMS320C31 DSP chip.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4E
• /
• pp.52-60
• /
• 2001

This paper describes real time implementation of subband sound localization system on a floating-point DSP TI TMS320C31. The system determines two dimensional location of an active speaker in a closed room environment with real noise presents. The system consists of an two microphone array connected to TI DSP hosted by PC. The implemented sound localization algorithm is Subband CPSP which is an improved version of traditional CPSP (Cross-Power Spectrum Phase) method. The algorithm first split the input speech signal into arbitrary number of subband using subband filter banks and calculate the CPSP in each subband. It then averages out the CPSP results on each subband and compute a source location estimate. The proposed algorithm has an advantage over CPSP such that it minimize the overall estimation error in source location by limiting the specific band dominant noise to that subband. As a result, it makes possible to set up a robust real time sound localization system. For real time simulation, the input speech is captured using two microphone and digitized by the DSP at sampling rate 8192 hz, 16 bit/sample. The source location is then estimated at once per second to satisfy real-time computational constraints. The performance of the proposed system is confirmed by several real time simulation of the speech at a distance of 1m, 2m, 3m with various speech source locations and it shows over 5% accuracy improvement for the source location estimation.