• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.345-348
• /
• 1999

본 논문에서는 내장형 응용에 적합한 RISC 마이크로프로세서와 DSP 프로세서의 기능을 유기적으로 결합한 구조를 연구하고 이를 설계한다. 프로그램의 크기를 줄이기 위해 RISC 명령어는 16비트 명령어 집합을 설계하고 분기 명령어로 인한 손실을 줄이기 위해 한 개의 지연 슬롯을 갖고 있다. DSP 명령어는 32비트 길이를 갖고 한 명령어로 곱셈, 덧셈(뺄셈), 두 가지 데이터 이동을 할 수 있어서 한 사이클에 최대 네 가지 동작을 할 수 있다 파이프라인 단계는 IF, ID, EX, MA, WB/DSP의 다섯 단계로 구성된다. DSP 기능을 지원하기 위해 내부 루프 버퍼를 갖고 정수 실행부에서는 주소 발생을 위한 전용 하드웨어와 DSP 유닛에서는 곱셈 및 누적 기능을 지원하기 위한 17 × 17 비트 곱셈기가 내장된다. 제안된 구조의 설계는 Verilog-HDL을 이용하여 top-down 설계 방식으로 설계되었고 각 기능 검증을 마친 후 3.3V, 0.6㎛ CMOS triple metal single poly 공정을 이용하여 합성하고 레이아웃 하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.983-991
• /
• 2009

While H.264/AVC is in wide use for multimedia applications such as DMB and IPTV service, we have limited usage cases for embedded real-time applications due to its high computational demand. The paper provides judicious guide line for optimization method selection, by presenting the detailed experiments data through the development process of a real time H.264 software encoder on embedded DSP. The experimental analysis includes an intensive profiling analysis, fast algorithm application, optimal memory assignment, and intrinsic-based instruction selection. We have realized a real-time software that encodes CIF resolution videos 15 fps on TMS320DM64x processors.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.1
• /
• pp.21-26
• /
• 2004

Recently with the development of power switching device and DSP which has peripheral devices to control AC servo system, the servo technology has met a new development opportunity. Those things make it possible to reduce the time of developing a AC servo system. Fixed point DSP such as TMS320F240x, and TMS320F28x series have a disadvantage in calculating floating number where TMS320C32 or TMS320C31 are floating point DSP. However they usually become a complex hardware system to implement the AC servo system and it increases the cost. In this study, a DSP based AC servo system with a 3-phase PMSM is proposed. The newly produced DSP TMX320F28l2-version C which has the performance of fast speed, 150MIPS, and a rich peripheral interface such as a 12bit high speed AD converter, QEP(Quadrature Encoder Pulse) circuit, PDPINT(Power Drive Protect Interrupt), SVPWM module and dead time module are used. This paper presents a method to overcome fixed point calculating using scaling all parameters. Also space vector pulse width modulation (SVPWM) using off-set voltage and a digital PI control are implemented to the servo system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.97-104
• /
• 1999

In this study we show a telemedicine system using a DSP, which gives fast and exact medical data such as the ECG signal of the external emergency patient and enables the patient to get temporary treatments under the direction of a doctor in the hospital. This transceiver, which is able to treat the real time transmission of dynamic medical data captured by the measuring instrument and bidirectional communication of voice signal, is implemented using DSB-SC as modulation and demodulation technique and digital filter of each terminal are implemented as FIR filter. The system designed with DSP in this study is very small and compact and it can k, furthermore, to support additional biomedical signals just by renewing the software.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1207-1212
• /
• 2011

This paper presents a study on the DSP(Digital Signal Processor) controller for the PBW(power-by-wire) system using BLDC(Brushless Direct Current) servo motor pump. The PBW hydraulic actuator was realized with hydraulic pump driven by BLDC servo motor, hydraulic cylinder and controller. This PBW system needs speed control of servo motor for linear thrust action of hydraulic cylinder. This paper implements a servo controller with vector control algorithm and MIN-MAX PWM technique. As CPU of a controller, TMS320F2812 DSP was adopted because it has PWM waveform generator, A/D converter, SPI(Serial Peripheral Interface) port and many input/output port etc.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.4
• /
• pp.543-552
• /
• 1996

The goal of this paper is to developed a DSP based power analyzing and control system by 3-Dimensional (3-D) space current co-ordinates. A developed system is made up of 486-PC and DSP (Digital Signal Processor) board, Active Power Filter, Non-linear thyristor load, and Power analyzing and control program for Windows. Power is analyzed using signal processing techniques based on the correlation between voltage and current waveforms. Since power analysis algorithm is performed by DSP, power analysis is achieved in real-time even under highly dynamic nonlinear loading conditions. Combining control algorithm with power analysis algorithm is performed by DSP, power analysis is achieved in real-time even under highly dynamic nonlinear loading conditions. Combining control algorithm with power analysis algorithm, flexibility of the proposed system which has both power analysis mode and control mode, is greatly enhanced. Non-active power generated while speed of induction motor is controlled by modulating firing angle of thyristor converter, is compensated by Active Power Filter for verifying a developed system. Power analysis results, before/after compensation, are numerically obtained and evaluated. From these results, various graphic screens for time/frequency/3-D current co-ordinate system are displayed on PC. By real-time analysis of power using a developed system, power quality is evaluated, and compared with that of conventional current co-ordinate system. (author). refs., figs. tabs.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.109-115
• /
• 2005

This paper addresses the CAN based networked intelligent multi-motor control system using DSP2812 microprocessor. CAN built in DSP2812 microprocessor is used to control and monitor the multi-motor system with the inverter driving system CAN network implementation schemes and the algorithm for multi-motor control and monitoring is also developed. We configure the multi-motor control experimental system to verify the proposed algerian and the reliability of CAN networks system in the various operation of two induction motors. The experimental results show that CAN based networked intelligent multi-motor control system using DSP2812 microprocessor can carry out the real-time network based control in various speed range and the position control of induction motors.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.72-81
• /
• 2008

High Performance DSP usually supports cache and internal memory. For an optimal implementation of a multimedia stream application on such a high performance DSP, one needs to utilize the cache and internal memory efficiently. In this paper, we investigate performance analysis of cache, and internal memory configuration and placement necessary to achieve an optimal implementation of multimedia stream applications like motion picture encoder on high performance DSP, TMS320C6000 series, and propose strategies to improve performance for cache and internal memory placement. From the results of analysis and experiments, it is verified that 2-way L2 cache configuration with the remaining memory configured as internal memory shows relatively good performance. Also, it is shown that L1P cache hit rate is enhanced when frequently called routines and routines having caller-callee relationships with them are continuously placed in the internal memory and that L1D cache hit rate is enhanced by the simple change of the data size. The results in the paper are expected to contribute to the optimal implementation of multimedia stream applications on high performance DSPs.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.69-72
• /
• 1997

A universal controller is designed using a DSP (digital signal processor). The design objectives of the system are to implement control algorithms that require a lot of calculations and to develop a convenient user-interface environment. To demonstrate the efficiency of the system, the time delay control algorithm is implemented for the 2 D.O.F.SCARA type robot and the experimental results are presented.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.258-261
• /
• 2003

This paper is a studying of the vector control of AC servo motor using a high performance DSP(TMX320F2812). This DSP has many special peripheral circuits to drive a AC Servo motor as AD converter, QEP and so on. It makes us reduce the time of developing a control system and also can be simple size controller. We use vector control algorithm for instantaneous torque control and SVPWM algorithm by offset voltage methods.