• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.4
• /
• pp.97-104
• /
• 2010

In this paper, we provide an embedded type non-contact bio-radar heart and respiration rate monitoring system. We implemented the rate finding algorithm into the embedded system. The high-speed and reliable real-time signal processor is then tested. To avoid null-point data loss problem, we applied quadrature demodulation. Among several other combining techniques, we suggest arctangent demodulation for quadrature channel combining and DSP is used for real-time signal processing. We also suggest DC-offset compensation technique to preserve the wanted DC components of the IQ signals for accurate demodulation while keeping the dynamic range of the ADC lower. Using Texas Instrument C6711 series DSP and external 12Bit ADC, we implemented proper elliptic digital filter and autocorrelation detection algorithm for robust commercial hand held device.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.3
• /
• pp.7-14
• /
• 2003

MPEG-1 audio standard is the algorithm for the compression of high-qualify digital audio signals. The standard dictates the functions of encoder and decoder pair, and includes three different layers as the complexity and the performance of the encoder and decoder. In this paper, we implemented the real-time system of MPEG-1 audio layer III decoder(MP3) with the TMS320C541 fixed point DSP chip. MP3 algorithm uses psycho-acoustic characteristic of human hearing system, and it reduces the amount of data with eliminating the signals hard to be heard to the hearing system of human being. It is difficult to implement MP3 decoder with fixed Point DSP because of it's broad dynamic range. We implemented realtime system with fixed DSP chip by using weighted look-up tables to reduce the amount of calculation and solve the problem of broad dynamic range.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.2
• /
• pp.139-144
• /
• 2011

The modern digital logic technology does not yet satisfy the speed requirements of real-time DSP circuits due to synchronized operation of multiplication and accumulation. This operation degrades DSP performance. Therefore, the double-base number system (DBNS) has emerged in DSP system as an alternative methodology because of fast multiplication and hardware simplicity. In this paper, authors propose a novel multiplication architecture. One operand is an output of a flash analog-to-digital converter (ADC) in DBNS format, while the other operand is a coefficient in the IEEE standard floating-point number format. The DBNS digital output from ADC is produced through a new double base number encoder (DBNE). The multiplied output is in the format of the IEEE standard floating-point number (FPNS). The proposed circuits process multiplication and conversion together. Compared to a typical multiplier that uses the FPNS, the proposed multiplier also consumes 45% less gates, and 44% faster than the FPNS multiplier on Spartan-3 FPGA board. The design is verified with FIR filter applications.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.4
• /
• pp.362-368
• /
• 2001

The goal of this paper is development ofa DSP based three phase power quality analyzer. Power analysis algorithm is a correlation function and it is accomplished using stand alone type TMS320C31 DSP(digital signal processor)board. Results of power analysis are displayed by LCD and D/A converter on the proposed system. Finally, this paper also goes on to discuss the performance of an instrument prototype, compared with one of those foreign models, both in terms of accuracy and speed of measurement.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.4
• /
• pp.75-80
• /
• 1998

In this paper, the real time characteristics analyzing system is proposed to analyze characteristics of inverter. The system is consisted of DSP unit and personal computer. Conventionally, power conversion system is designed by the load and the use. And control characteristics for the designed power conversion system is evaluated by the control input. In order to study of control methods, power conversion system is required for a study of control methods and observed system is required for a analyzing of the inverter. Inverter system is consisted to evaluate for proposed real time characteristics analyzing system. And induction motor is driven by control input that is manufactured by personal computer. Output of inverter and control characteristics is variously analyzed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.827-830
• /
• 2011

In this paper, a wind speed & direction module and the DSP(Digital Signal Processor) sensor interface circuit board are proposed. This DSP system accepts and process the informations from a wind speed & direction module, the atmospheric pressure sensor, the ambient air temperature sensor and transfers it to the PC monitering system. Especially, a wind speed & direction module and a DSP hardware are directly designed and applied. A wind speed & direction module have a construction that it have four film type RTD(Resistive Temperature Detectors) or film type Piezo sensors adhered around the circular metal body for obtaining vector informations about wind. By this structure, the module is enabled precise measurement having a robustness about vibration, humidity, corrosion. A sensor signal processing circuit is using TMS320F2812 TI(Texas Instrument) Corporation high speed DSP.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.4
• /
• pp.45-51
• /
• 2000

This paper describes real-time implementation of a multi-channel G.729A speech coder using a 16 bit fixed-point Digital Signal Processor (DSP) and its application to a Voice Mailing Service (VMS) system. TMS320C549 by Texas Instruments was used as a fixed point DSP chip and a 4 channel G.729A coder was implemented on the chip. The implemented coder required 14.5 MIPS for the encoder and 3.6 MIPS for the decoder at each channel. In addition, memories required by the coder were 9.88K words and 1.69K words for code and data sections, respectively. As a result, the developed VMS system that accommodates two DSP chips was able to support totally 8 channels. Experimental results showed that the our multi-channel coder passes all of test vectors provided by ITU-T.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.4
• /
• pp.184-188
• /
• 2006

This paper presents DSP based narrow band satellite communication signal power detector for tracking control of mobile satellite antenna system. An analog filter based conventional power detector has poor performance due to frequency drift of carrier. Also, it is very difficult to change an analog filter bandwidth according to changed bandwidth of transmitted signal. To solve these difficulties, we proposed DSP based signal power detector, which is easy to change bandwidth of filter and to match shifted frequency of carrier. The proposed signal power detector consists of a FFT function to measure frequency drift of carrier, a programmable filter bank function to limit of received signal bandwidth and a power calculation function to measure power of filtered signal in 12-bit linear scale. Test results of implemented signal power detector, based on TMS320C5402 DSP, showed that it satisfied required functions and performances and properly operated.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.19-23
• /
• 2001

DSP-based implementation is pervasive in wireless communication parts for systems and handsets according to developing high-speed and low-power programmable Digital Signal Processor (DSP). In this paper, we present a real-time implementation of multi-channel Adaptive Multi-rate (AMR) speech coder. The real-time implementation of an AMR algorithm is achieved using 32-bit fixed-point TMS320C6202 DSP chip that operates at 250 MHz. We performed cross compile, linear assembly optimization and TMS320C62xx assembly optimization for real-time implementation. Furthermore, speech data input/output function and communication function with external CPU is included in an AMR speech coder. The AMR Speech coder developed using DSP EVM board was evaluated in ETRI IMT-2000 Test-bed system.

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.107-116
• /
• 2001

The speech includes various kinds of information : language information, speaker's information, affectivity, hygienic condition, utterance environment etc. when a person communicates with others. All technologies to utilize in real life processing this speech are called the speech technology. The speech technology contains speaker's information that among them and it includes a speech which is known as a speaker recognition. DTW(Dynamic Time Warping) is the speaker recognition technology that seeks the pattern of standard speech signal and the similarity degree in an inputted speech signal using dynamic programming. ln this study, using TMS320C32 DSP processor, we are to embody this DTW and to construct a security system.