• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.263-266
• /
• 2001

본 연구는 전력품질을 평가할 수 있는 DSP기반 3상 전력품질 분석장치의 국산화 개발을 목표로 하고 있다. 전력분석 알고리즘은 시간영역의 간단한 평균전력이론을 사용하였고, 독립형 TMS320C31 DSP 보드에 의해 전력을 실시간으로 분석하여 LCD와 D/A 변환기로 출력하였다. 2PH의 모터와 그 구동장치 (인버터)의 전력품질을 분석함으로서 외국산 제품과 비교하여 그 성능과 정밀도 등을 검토하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.268-270
• /
• 2010

Recently, According to increasing interest to original sound Karaoke instrument, MIDI type karaoke manufacturer attempt to make more cheap method instead of original recoding method. In this paper, we developed how to create MR from AR, recorded in stereo, by using the energy difference in the frequency domain and how to implement in DSP(TMS320C6713) were developed. At the output of the DSP board, 6-channel audio output interface designed for real-time stereophonic generating original sound, vocals removed MR, and separated vocals simultaneously. Real-time listening test using DSP show vocal separating and removal task successfully.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.13 no.5
• /
• pp.19-28
• /
• 2017

Various methods for reducing the load on the server have been implemented in performing face recognition remotely by the spread of IP security cameras. In this paper, IP surveillance cameras at remote sites are input through a DSP board equipped with face detection function, and then face detection is performed. Then, the facial region image is transmitted to the server, and the face recognition processing is performed through face recognition distributed processing. As a result, the overall server system load and significantly reduce processing and real-time face recognition has the advantage that you can perform while linked up to 256 cameras. The technology that can accomplish this is to perform 64-channel face recognition per server using distributed processing server technology and to process face search results through 250 camera channels when operating four distributed processing servers there was.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.24-30
• /
• 2009

In this paper, the FPGA modem platform complying with 3GPP Release 7 eHSPA specifications and its regularized verification flow are proposed. The FFGA platform consists of modem board supporting physical layer requirements, MCU and DSP core embedded control board to drive the modem board, and peripheral boards for RF interfacing and various equipment interfaces. On the other hand, the proposed verification flow has been regularized into three categories according to the correlation degrees of hardware-software inter-operation, such as simple function test, scenario test call processing and system-level performance test. When it comes to real implementations, the emulation verification strategy for low power mobile SoC is also introduced.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.6 no.1
• /
• pp.27-33
• /
• 2001

This paper presents a digital instrument for a DSP based power quality analysis in three phase power system where current waveform is non-sinusoidal. it is based on stand alone type TMS320C31 DSP(digital signal processor)board and on a special high-speed data acquisition system. Power quality of low power motor drives are analyzed and processed by using a simple average power algorithm, and result of power analysis are displayed by LCD in the proposed system. This paper also goes on to discuss the performance of an instrument prototype, both in terms of accuracy and speed of measurement under the transient and steady state condition.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.11 no.2
• /
• pp.110-118
• /
• 1997

This paper describes the dissipation factor measuring techniques of insulating oil on operating pole transformers by using digital signal processor. After applying voltage to the condenser which is in¬stalled in a transformer, acquiring source voltage and current of condenser and using cross-correla¬tion techniques, we can check the dissipation factor of insulating oil. To improve measuring accuracy and the speed of process, we use hardware such as TMS320C31 DSP board and software such as cross -correlation techniques. We simulated the measuring accuracy and the degree of the noise effect of this new measuring techniques by using computer simulation, and compared the simplified measuring devices with Schering bridge on degraded insulating oil. The result showed that this measuring tech¬nique can be used as diagnostic method on the pole transformers.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.548-551
• /
• 2003

The adaptive filter is proposed for removing EOG from measured EEG on the frontal lobe. The proposed adaptive filter has been implemented and the feedback output control algorithm has been employed to control the alpha wave ratio on the basis of TMS320C31 DSP board with the on-line and real time performance. The feedback algorithm controls the input voltage of stimulating devices on the portable bio-feedback system. The EEG data are acquired at the $F_{p1}$ and $F_{p2}$ localization and are processed by the proposed adaptive filter. We demonstrated that the proposed adaptive filter could effectively remove EOG from the measured EEG on the frontal lobe and the feedback algorithm is proper to control the output voltage of DSP board using the ratio of the alpha wave.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.187-189
• /
• 2002

A relaying board is developed for the study of digital relay, which is based on Digital Signal Processor(DSP). The present development is capable of understanding and application for digital relay hardware. To support the design of relaying hardware, first A/D convertor MMI and serial port for communication are embedded, and next a booting cables of three types are supplied. More particularly the relaying board that is convinient to test digital relaying algorithm. This paper concludes by implementing the distance relaying algorithm into a relaying board, the hardware test results show practically high performance.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.13-16
• /
• 2001

본 논문에서는 3GPP 규격에 따른 IMT-2000 시스템용 UE AMR 코덱의 소프트웨어 및 하드웨어 개발에 관하여 논한다 UE AMR 코덱은 ASIC 개발을 고려하여 Teak-Lite DSP 칩을 사용하여 개발하였다 AMR 코덱을 구현하기 위한 효율적인 소프트웨어 개발 기법을 설명하고 하드웨어 디자인도 논한다 개발된 UE AMR 코덱에는 음성 데이터 입출력 기능은 물론 리부 호스트 프로세서와의 통신 기능도 포함된다. Teak-Lite EVM보드를 사용하여 실시간으로 동작하는 AMR 코덱 소프트웨어를 개발하였다. 또한 동시에 UE AMR 코덱용 하드웨어도 개발하였다. ETRI에서 개발 및 시험 중인 IMT-2000 시스템 상에서 개발한 UE AMR 코덱의 동작 및 기능을 검증하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.2
• /
• pp.138-147
• /
• 2005

This paper presents a SPMSM(Surface-mounted Permanent Magnet Synchronous Motor) servo drive system using high performance TMS320F2812 DSP for the industrial application. The DSP(Digital Signal Processor) Controller enables an enhanced real time algorithm and cost-effective design intelligent for only exclusively motor drives which can be yield enhanced operation, fewer system components, lower control system cost, increased efficiency and high performance. The suggested system contain speed and current sensing circuits, SVPWM(Space Vector Pulse Width Modulation) and I/O interface circuit. The developed servo drive control system showns a good response characteristics results and high performance features in general purposed 400[w] machine. This system can achieve cost reduction and size minimization of controllers.