• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9A
• /
• pp.669-677
• /
• 2003

In spite of many advantages of Meteor Burst Communications(MBC) on its transmission channel, the fact that its duty rate is less than10 percents is a considerable deficiency of MBC. To overcome with this deficiency without paying large cost, we use a direct sequence(DS)-spread spectrum(SS) method applying a reference code to improve the duty rate on the transmission channel. This method doesn't need to add the components for acquisition or tracking the signal so that it keeps the cost efficiency the MBC has as well as improves the duty rate on the transmission channel. The improvement by this method is more significant when the received signal is weak. Simulation results show that if we increases the process gain (Gp) by 10 dB when the average burst length is 50ms, the burst length tends to be extended more than 220% of its average length, 160ms, and the frequency of generating this phenomenon increases 3.1 times more.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9A
• /
• pp.874-881
• /
• 2008

This paper presents an automatic frequency control algorithm for RTLS DS-SS modem based on the standard of ISO/IEC 24730-2. The presented automatic frequency control algorithm consists of frequency acquisition mode and frequency tracking mode, and the frequency acquisition mode is divided into the angle estimation step for frequency offset estimation and the verification step for removing the angle ambiguity. In the angle estimation step, three different sub-bit angles are estimated according to the timing intervals, then the estimates are used to re move the angle ambiguity in the verification step. The theoretical analysis and the simulation results of the proposed frequency control algorithm are presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10C
• /
• pp.1433-1443
• /
• 2004

The power line modem proposed in this paper transmits the remote control signal using CSK(Code Shift Keying) and DS/SS method. The CSK technique provides the increased capacity of transmission and robustness towards noise. Besides, the DS/SS technique provides protection against narrow-band Gaussian interference and multi-path interference. The modem supports full-duplex communication using FDD(Frequency Division Duplex) and the modem structure for forward link is same with that for reverse link. To switch each sub-controlled unit smoothly, 4/$\pi$-DQPSK is adopted for noncoherent demodulation. The PN code for spreading spectrum seues to divide each group which consists of sub-controlled units and Walsh code is used for the M-ary CSK technique. Each block is designed and verified with TMS320C5402 DSP. We show the superiority of the proposed method by analyzing numerically the system performance for the factors of the DS/SS and CSK method ullder additive white Gaussian noise and PBI.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1347-1350
• /
• 2004

현재 디지털 이동통신에서 사용되고 있는 DS/CDMA 방식은 멀티미디어 통신과 같은 고속 데이터 전송에 적용할 경우 다중경로 페이딩 채널하에서 인접심볼간 간섭 및 다중접속간섭이 심해지는 문제점을 갖고 있다. 본 논문에서는 이러한 점을 보안하기 위하여 Hybrid DS/FH CDMA 방식을 이용한 시스템에 고속전송을 위한 Multi-Code 시스템을 적용하여 Hybrid DS/FH Multi-Code Spread Spectrum System을 제안하였으며, 컴퓨터 시뮬레이션을 통하여 성능을 분석 검증 하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.83-91
• /
• 2008

To design the light control system using the PLC(Power Line Communication) with the ballasts of MH(Metal Halide) lamps, we analyzed the noise effect on the power line by the electronic ballast. For the power line characteristics are changed by the loads, the ballast have to be designed to be suitable to the PLC. Therefore, this paper proposed the optimal ballast and designed two kinds of PLM(Power Line Modem) which one is ASK type and the other is FSK type. Two type of PLM have used the manchester codes or DS/SS code. Experimental results have shown that the FSK type modem by the DS/SS coding technique have the best characteristics.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.4
• /
• pp.467-473
• /
• 1999

We have realized the two kinds of power line communication systems by the FSK MODEM. The first approach is the DS-SS (Direct suquence-spread spectrum) technique using 8 bits pseudo noise, the other is Convolutional coding method by the new algorithm. Their characteristics are comparied with each other by experimenting their Bit Error Rates (BER) in high level of Noise. The results have showed that two systems are useful to the application of HA (Home Automation) systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.931-941
• /
• 2000

We propose a serial acquisition scheme using antenna arrays for initial acquisition of direct sequence spread spectrum (DS-SS) signals, which can lower substantially the range of detectable signal-to-noise ratio (SNR). The proposed scheme uses the sum of the independent decision samples form psedo-noise (PN) co-phased noncoherent I-Q matched filters (MFs) associated with antenna arrays as a decision variable in order to enhance SNR of the resulting signal. We analyze its mean acquisition time performance under an additive white Gaussian noise (AWGN) channel and a flat Rayleigh fading channel by deriving the expressions for the probabilities of detection and false alarm. From mumerical results, we see that the acquisition performance of the proposal scheme becomes improved continually as the number of antennas increses.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.125-128
• /
• 2003

CSK(Code Shift Keying) 방식은 전송 용량을 높이고, 잡음에 더욱 견고히 할 수 있다[1,2]. 전통적으로 다중 경로 페이딩, 예측 불가능한 위상과 진폭의 왜곡, 협대역 간섭 신호 및 예측 불가능한 시변 재밍 신호에 의한 간섭 등을 특징으로 하는 채널상에서는 DS-BPSK 방식이 사용되었지만 본 논문에서는 코드열의 반복적 특성을 적용한 CSK/SS(Code Shift Keying/Spread Spectrum) 방식을 제안하고 성능을 분석한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.1
• /
• pp.47-55
• /
• 1994

This paper investigates the performance analysis of the packet DS/SS receiver with a PJED(phase-jump error detector) using the block signal processing(BSP) methods. The conventional packet DS/SS block receiver has a high probability of mistaking the phase-jump detection, which causes the frequency estimation error. The conventional receiver uses a Matched-Pulse Timing Extractor which has a complicated structure. The proposed packet DS/SS block receiver with the PJED which uses libearity of the phase has little probability of mistaking the phase-jump detection. The proposed Matched Pulse Timing Extractor gas the more simple structure but obtains the same performance on the exact matched-pluse timing as the conventional one does. The simulation results show that the proposed receiver gives about 2dB improvement in the BER compared with the conventional receiver.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.2
• /
• pp.62-69
• /
• 1984

The performance of direct-sequence spread spectrum(DS-SS) receiver may be enhanced by using the digital whitening filter. In this paper, the hard limited feedback whitening filter that whiten the interference and noise alone is proposed to obtain the additional resistance to narrowband interference. The recursive solution for the calculation of tap weights is presented and the expression for SNR and BER is derived and compared with the conventional digital whitening filter. As the result of computer simulation it is proved that the error performance is improved considerably.