• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.598-601
• /
• 2001

As many sensors and actuators are used in many automated system, various industrial networks are adopted for digital control system. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network delays. This paper presents the implementation scheme of a networked control system via Profibus-DP network. More specifically, the effect of the network delay on the control performance was evaluated on a Profibus-DP testbed, and a GA based PID tuning algorithm is proposed to demonstrate the fesibility of the networked control system.

• International Journal of Precision Engineering and Manufacturing
• /
• v.3 no.3
• /
• pp.12-20
• /
• 2002

As numerous sensors and actuators are used in many automated systems, various industrial networks are adopted for real-time distributed control. In order to take advantages of the networking, however, the network implementation should be carefully designed to satisfy real-time requirements considering network induced delays. This paper presents an implementation scheme of a networked control system via Profibus-DP network fur real-time distributed control. More specifically, the effect of the network induced delay on the control performance is evaluated on a Profibus-DP testbed. Also, two conventional PID gain tuning methods are slightly modified fur fouling controllers fur the networked control system. With appropriate choices for gains, it is shown that the networked control system can perform almost as well as the traditional control system.

• Transactions of Materials Processing
• /
• v.21 no.6
• /
• pp.384-388
• /
• 2012

Sheet metal forming processes induce residual stress in the final product due to plastic deformation. The residual stress leads to elastic recovery of the formed part called springback, which causes shape errors in the final product. This error is a serious issue, especially for high strength steels, which are widely used in auto-body structures. Therefore, the evaluation of the amount of springback becomes critical for high strength steels. This paper investigates the springback behavior of DP780 steel sheets after the U-bending process using the geometry of the standard U-shape tool from the NUMISHEET'93 benchmark problem. The amounts of springback were measured as a function of the intrusion direction, forming speed and blank holding force.

• The Plant Pathology Journal
• /
• v.28 no.2
• /
• pp.212-215
• /
• 2012

Pyrenophora graminea, the causal agent of leaf stripe disease, is an economically important pathogen of barley found worldwide. It is critical to clearly define and standardize the leaf stripe assessment methods to avoid subjectivity and variability between assessors. Therefore, in this study, a comparison between the proportion of diseased plants (DP) and the proportion of diseased leaves (DL) per plant was investigated. Disease assessments were made visually at multiple sample sites in artificially and naturally inoculated research and production fields during four growing seasons. There were significant differences (P = 0.001) among cultivars in mean DP and DL averages, which are consistently higher in susceptible barley. However, DP values increased linearly as DL increased. The slopes and intercepts of the DP-DL relationship were consistent over the four growing seasons. This result might make a significant contribution for leaf stripe assessment in barley breeding programme.

• Journal of Sericultural and Entomological Science
• /
• v.40 no.2
• /
• pp.97-104
• /
• 1998

Mainly due to limited genetic resources available and also urgent need for hybrids suitable to local conditions, conventional theories and regular methods for bivoltine silkworm breeding are not easily applicable in such a tropical country as Sri Lanka which is recently planning to scale-up the silk industry. A simplified but practical methodology was introduced to overcome such constraints. Through application of such modified informal breeding methods, two hybrids named DP0308 and DP0314 were selected for cocoon production. Details of the altered method of germplasm improvement in the silkworm are presented, along with combining ability and heritability estimates for six parental pure lines in a half-diallel cross.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.910
• /
• pp.1265-1272
• /
• 2004

The purpose of this study is to develope wrinkle recovery property, DP rating of Tencel by using BTCA(1,2,3,4-butanetetracarboxylic acid) and MgCl$_2$ that does not make water pollution. The adoptable condition to improve the wrinkle resistance and DP rating was determined 10％ BTCA(o.w.f), 3％ catalyst(o.w.f), 0.5％ softener(o.w.f), 5min padding time, 150$^{\circ}C$ curing temperature, 2min curing time and pH 2.7. It was proven that ester groups were formed and cross-links increased by treating Tencel with BTCA. By XPS diffraction, Tencel treatment using BTCA was proved not to affect crystal formation.

• Textile Coloration and Finishing
• /
• v.13 no.1
• /
• pp.18-22
• /
• 2001

Effects of cationic surfactants old the wetting behavior of the DMDHEU treated cotton fibers were investigated using a technique based on the Wilhelmy principle. The results indicated that Interactions between the fiber and water ill the interface make contributions to wettability of the cotton fiber surface because of reorientation of polar groups at the interface. The effects of types and concentration of cationic surfactant on the wettability of both control and durable press(DP) finished cotton fiber are discussed. Below and near the critical micelle concentration(cmc), the adsorption of hexadecyltrimethylammoniumbromide(HTAB) on the control fiber makes the fiber surface more hydrophobic. Near and above the cmc of octadecyltrimethylammouniumbromide(OTAB) , the decrease in advancing contact angles indicates that the control cotton surface became hydrophilic. By the adsorption of both HTAB and OTAB onto the fiber surface, the hydrophobicity of the DP finished fiber surface became mere hydrophilic.

• Journal of Industrial Technology
• /
• v.29 no.A
• /
• pp.47-54
• /
• 2009

In this paper, we proposed hand detection and hand gesture recognition from USB camera video. Firstly, we extract hand region extraction using skin color information from a difference images. Background image is initially stored and extracted from the input images in order to reduce problems from complex backgrounds. After that, 16-directional chain code sequence is computed from the tracking of hand motion. These chain code sequences are compared with pre-trained models using DP matching. Our hand gesture recognition system can be used to control PowerPoint slides or applied to multimedia education systems. We got 92% hand region extraction accuracy and 82.5% gesture recognition accuracy, respectively.

• Macromolecular Research
• /
• v.13 no.4
• /
• pp.321-326
• /
• 2005

Photochromic diarylethene polymers (DPs) in which 1,2-bis(2-methylbenzo[b ]thiophene-3-yl)hexafluorocyclopentene (BTF6) were covalently grafted onto the polymer main chain as pendant photochromic units were newly synthesized and their photochromic properties were investigated using steady-state and picosecond timeresolved spectroscopies. Polysiloxanes substituted with BTF6 molecules were prepared by sol-gel process using a mixture of tetraethoxysilane (TEOS), a silylated BTF6, and an organically modified silane precursor in the presence of HCl. The polysiloxane film (DP1) prepared from $\omega-methoxy$ poly(ethylene glycol) 3-(triethoxysilyl) propylcarbainate (MPGSC) as the silane precursor showed a much lower glass transition temperature than that (DP2) from heptadecafluorodecyltrimethoxysilane (HDFTMS). The ring-closure quantum yields of DP1 and DP2 were determined to be 0.20 and 0.02, respectively. Such a large difference in the quantum yield was attributed to the polymer matrix environment of the free inner volume.

• Journal of information and communication convergence engineering
• /
• v.13 no.2
• /
• pp.86-96
• /
• 2015

In mobile communication, mobile services [MSs] (e.g., phone calls, short/multimedia messages, and Internet data) incur a cost to both mobile users (MUs) and mobile service providers (MSPs). The proposed model MobPrice consists of dynamic data pricing schemes for mobile communication in order to achieve optimal usage of MSs at minimal prices. MobPrice inspires MUs to subscribe MSs with flexibility of data sharing and intra-peer exchanges, thereby reducing overall cost. The main contributions of MobPrice are three-fold. First, it proposes a novel k-level data-pricing (kDP) scheme for MSs. Second, it extends the kDP scheme with the notion of service-sharing-based pricing schemes to a collaborative peer-to-peer data-pricing (pDP) scheme and a cluster-based data-pricing (cDP) scheme to incorporate the notion of 'cluster' (made up of two or more MUs) in mobile communication. Third, our performance study shows that the proposed schemes are indeed effective in maximizing MS subscriptions and minimizing MS's price/user.