• 전력전자학회논문지
• /
• 제21권2호
• /
• pp.126-133
• /
• 2016

This paper proposes a new PWM method to reduce the common mode voltage change in three-level Vienna rectifier. This new proposed PWM method uses medium voltage vector for the three-level Vienna rectifier to determine the sum of three-phase voltage zero, and the common mode voltage variation is decreased. Using the carrier comparison method, the switching function generator for three-level Vienna rectifier has been proposed. The effects of the proposed PWM method have been verified through simulation using the PSIM.

• Journal of Electrical Engineering and Technology
• /
• 제8권4호
• /
• pp.911-919
• /
• 2013

This paper reports the development of test bed with the energy recovering technique using two-step boost converter. The device is utilized for LDC aging test of Hyundai Motor's LPI AVANTE HEV in mass production. The developed power recycle type test bed is designed as 1.5 kW class to test up to the maximum load power of LDC and is also designed to supply scant power supply up to 500 W after power recycle. The theoretical design analysis and operational characteristics analysis results of test bed are reported, and its practicality and reliability are verified through the test result. Also, the finally developed test bed confirms approximately 79~85 % energy saving effect compared to the usual traditional aging test system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.309-310
• /
• 2012

본 논문은 풍력발전시스템의 발전기 측 컨버터로 3상 단방향 전력변환기인 비엔나 정류기를 적용하는 연구에 대하여 기술한다. 본 논문에서는 기존의 발전기 측 컨버터로서, 3레벨의 3상 단방향 정류기인 비엔나 정류기를 적용 하여, 그 효과를 모의해석을 통하여 확인한다. 모의해석은 MATLAB/SIMULINK를 이용하여 풍력발전시스템의 발전기 측을 구현하여 풍력 발전에 적용된 비엔나 정류기 성능을 분석하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.17-19
• /
• 2010

In this paper, new PWM method is proposed to reduce input current THD of PWM Rectifier. In general, the carrier comparison PWM method is used for PWM rectifier in which triangle wave is used as a carrier wave. However, large d-axis current ripple by this method can be a source of large THD. In this paper, new carrier comparison PWM method is proposed in which sawtooth wave is used as a carrier wave. Depending on the phase of the voltage commands, the rising or falling sawtooth wave is selected to reduce the THD. The simulation results verified the performance of the proposed method.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.183-185
• /
• 2010

In this paper, carrier comparison SVPWM method for voltage control of vienna rectifier is proposed. Two carrier waves are used to compare voltage commands. The feasibility of the proposed PWM method is proven by the simulation. In the simulation results, it is shown that vienna rectifier can be controlled easily by the proposed method.

• 전력전자학회논문지
• /
• 제17권4호
• /
• pp.345-352
• /
• 2012

This paper proposes a new method to reduce 120Hz output voltage ripple of LLC converter using resonant voltage controller. This method can reduce the 120Hz output voltage ripple with very high gain at this frequency by the resonant controller with previous PI voltage controller. The reason why the voltage ripple can be reduced is explained by the Bode diagram comparing with the previous PI controller. The simulation with Matlab/Simulink is carried out for this resonant controller and the simulation results show that resonant controller can reduce the 120Hz output voltage ripple. Experiments with DSP controller also carried out and the experimental results also show that the usefulness of the proposed voltage controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.942-943
• /
• 2008

The boost converter is usually used in power factor correction. The dynamic losses of its output diode are produced during the reverse recovery time. The power efficiency is decreased due to the losses and also it generates the noise. These disadvantages have been remarkably improved by ZCS and ZVS techniques of power factor improvement circuit. Some benefits lead to the achievement of higher power density and the development cost can be decreased. In this paper work, the reverse recovery suppression(RS) PFC method is used. A inductor and a diode are added into the conventional circuit. The switching device, MOSFET is turned off after the reverse recovery current has come to the zero level. The Zero Current Switching(ZCS) is implemented at that time. This power conversion technique improves the efficiency to about 1% and reduces the noise obviously. And the additional inductor can be designed using an original filter core in the circuit. The converter size is reduced effectively.

• 대한전자공학회논문지SD
• /
• 제37권1호
• /
• pp.19-28
• /
• 2000

고장에 대한 강인성, 높은 출력 전류 특성 및 모듈화의 용이성 때문에 병렬 인버터 시스템은 그활용도가 점차 높아지고 있다. 이러한 병렬 인버터 시스템에서 전체 시스템 전력균형 제어는 주로 주파수 드롭과 전압 드룹 제어 또는 유효전력 과 무효전력 제어를 통하여 이루어지고 있다. 그러나 이러한 제어방법들은 시스템 변수 변동 및 부하변동에 따라 늦은제어 응답특성을 가지는 단점을 가지고 있다. 이러한 단점을 해결하기위해, 본논문에서는 병렬 인버터 시스템의 각모듈 출력전력을 균등화 시키는 새로운 제어기를 제안하였다. 제안한 제어기는 하드웨어 구현의 용이성, 피크전류 차단 기능들의 특성을 가진다. 또한 본논문에서는 제안한 제어기의 설계 절차를 기술하였으며, 여러 부하조건 및 시스템 파라미터 변동조건에 따라 순시전력균형제어기 동작 특성의 효용성을 컴퓨터 시뮬레이션 및 실험을 통하여 확인 하였다.

• 전력전자학회논문지
• /
• 제19권3호
• /
• pp.211-219
• /
• 2014

This paper proposes a low voltage high current LLC resonant converter for Green PC. Green PC is composed of a lot of blade PCs, and it is a centralized system to manage them in computer center. Green PC should require that its power supplies have several characteristics such as low output voltage, high output current, and high power conversion efficiency. Conventional PSFB (Phase Shift Full Bridge) converter is usually used as DC/DC converter for computer power supply because it has high power conversion efficiency thanks to ZVS (Zero Voltage Switching) operation under middle and high load conditions. However, this converter has some problems such as large switching noise and limitation of ZVS operation under light load condition. In order to improve the performance of power supply for Green PC, a new power supply using popular high efficiency LLC resonant converter for low voltage and high current application is proposed in this paper. The proposed power supply has ZVS capability over the entire load range, thus resulting in good efficiency and high switching frequency. Experimental results verify the performance of the proposed power supply for Green PC using 2[kW] (19[V], 105[A]) rated prototype converter.