• Transactions of Materials Processing
• /
• v.16 no.2 s.92
• /
• pp.144-149
• /
• 2007

The superplastic forming/diffusion bonding(SPF/DB) is widely used in the automotive and aerospace industry because it has great advantage to produce complex, light and strong parts. But the superplastic forming process requires much forming time and generates excessive thinning in the thickness distribution of formed part. It is necessary to minimize trial and error for SPF/DB Process. Finite element analysis using $L_{18}$ orthogonal may table of Taguchi method for 3-Sheet D/B process is carried out. Through the study, effect of process parameters, such as DH region size, thickness and friction coefficient, is evaluated and the optimum condition is derived.

• Journal of the Korean Solar Energy Society
• /
• v.21 no.4
• /
• pp.13-20
• /
• 2001

The purpose of this study is to analyze the effect of Super-insulation for self-sufficient house. The process of the study is presented in the following. 1) selection reference model for simulation and verification of reference model with computer simulation program(DOE2.1E and ESP-r 9.0). 2) analysis of effect according to insulation-thickness, installed insulation position, kinds of windows, rate of infiltration, Finally, the results of this study will be to provide the most reasonable method concerned with self-sufficient house.

• Natural Product Sciences
• /
• v.8 no.3
• /
• pp.94-96
• /
• 2002

Four hundred varieties of plant extracts were screened for inhibitory activity against the NFAT transcription factor which plays an important role in inducing immune response. Among them, the MeOH extract of Cnidium officinale showed potent activity, and the activity-guided separation yielded butylidenephthalide, senkyunolide A and falcarindiol as the active constituents. The $IC_{50}$ value of butylidenephthalide was $1.3{\times}10^{-4}\;M$ and was similar to that of senkyunolide A $(2.1{\times}10^{-4}\;M)$. Interestingly, falcarindiol showed higher activity $(IC_{50},\;2.6{\times}10^{-5}\;M)$ than the two phthalides.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1603-1606
• /
• 2005

Eye Glass Display (EGD) with microdisplay to realize the virtual display can make the large screen, so virtual image has been developed by using microdisplay panel. This paper shows study of low cost lens design and simulation for microdisplay system with 0.6" Liquid Crystal on Silicon (LCoS) panel. Lens design optimized consider to spherical aberration, astigmatism, distortion, and chromatic aberration. Code V is used and it designed an aspheric lens about exit pupil 6mm, eye relief 20mm and 35 degree of field of view (FOV). With the application this aspheric lens to LCOS type's microdisplay, virtual image showed 50 inch at 2m. One side of the aspheric lens was constituted from diffractive optical element (DOE) for the improvement in a performance. It had less than ${\pm}2%$ of distortion value and modulation transfer function in axial had 20% of resolution with 30 lp/mm spatial frequency. The optical system is suitable for display of 0.6"-diagonal with SVGA.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.296-297
• /
• 2000

프라운호퍼 회절에 의하여 주어진 세기 무늬를 발생시키는 회절광학소자(Diffractive Optical Element, DOE)는 회절무늬소자, 키노폼(kinoform), 컴퓨터 푸리에 홀로그램 (computer-generated Fourier hologram) 등으로 불리우며, 광정보처리, 광연결, 레이저가공에서 중요한 역할을 한다. 이 소자를 설계하는 매우 다양한 방법들이 제안되었는데, iterative Fourier transform 알고리즘(IFTA)과 이를 변형한 알고리즘들이 가장 널리 사용된다. IFTA는 fast Fourier transform(FFT)를 활용하므로 계산시간이 절감되지만 국소 최소점에 고착되는 stagnation문제가 있어 이를 해결하기 위한 많은 변형된 알고리즘들이 제안되었다. 본 연구에서는 최근에 제안한 new Pnoise algorithm with hybrid input-output algorithm(NPA-HIOA)$^{(1)}$ 의 설계 성능을 IFTA, hybrid input-output 알고리즘(HIOA), new Pnoise 알고리즘(NPA)$^{(2)}$ , Nonlinear Least-Square (NLS)$^{(3)}$ 등의 기존의 알고리즘들과 비교하고자 한다. (중략)

• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.2
• /
• pp.140-148
• /
• 2000

This paper presents iterative schemes and continuation schemes for designing robust controllers which stabilize dynamic systems having bounded parametric uncertainties. Utilizing results of the cheap control problem, some existence conditions of the robust controller are obtained, which are different from the matching conditions. continuation schemes are used to overcome the divergence problem of iterative schemes. The roust controller design method is extended to nonlinear system ans easily implementable series solution is also obtained. Results are illustrated with simple examples.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.145-148
• /
• 2001

A large area plasma source using parallel $2{\times}2$ ICP antennas showed improved etching uniformity by the E-ICP operation. ITO etching process with $CH_4$ gas chemistry is optimized with the DOE (Design of Experiment) based on Taguchi method. Various methane ratios in methane and argon mixture are compared to confirm the effect of polymerization. The analysis shows that the effect of bias power is the largeset. We obtained higher ITO etching rate and better uniformity on $350{\times}300mm$ substrate at the 50Hz magnetization frequency of the E-ICP operation technique,

• The KSFM Journal of Fluid Machinery
• /
• v.19 no.2
• /
• pp.16-20
• /
• 2016

Design optimization of a transonic compressor rotor(NASA rotor 37) was carried out using response surface method(RSM) which is one of the optimization methods. A numerical simulation was conducted using ANSYS CFX by solving three-dimensional Reynolds-averaged Navier Stokes(RANS) equations. Response surfaces that were based on the results of the design of experiment(DOE) techniques were used to find an optimal shape of blade which has the maximum aerodynamic performance. Two objective functions, viz., the adiabatic efficiency and the loss coefficient were selected with three design configurations to optimize the blade shape. As a result, the efficiency of the optimized blade is found to be increased.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.2
• /
• pp.312-322
• /
• 2001

This paper investigates the combined effects of parameters such as die surface finish, die directionality of stoning contact pressure and draw speed on the resulting coefficient of friction. Also, this study show the correlation between the NN(Neural Network) and DOE(Design of Experiments) to reduce the number of experiments without the loss of the effects of parameter upon coefficient of friction. The experiments were run in random order with at least three replicates. It was found that the directional stoning orthogonal to the pulling direction is lower friction than directional stoning parallel to the pulling directi on using FCD55 die and SPCEN.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.101-108
• /
• 2010

Domestic three-way catalyst satisfies exhaust gas conversion efficiency or pressure drop etc. but doesn't satisfy thermal durability. Thermal stress analysis for three-way catalyst was performed based on experimental temperature distribution. Thermal safety of three-way catalyst was estimated by safety factor. Aspect ratio variable had the most significant effect on thermal stress. Thickness variable had the least significant effect on thermal stress. Optimal conditions for premature failure prevention of three-way catalyst were as follows : (1) aspect ratio of three-way catalyst : 0.6:1 (2) 2.84mm thick (3) silicon nitride. The safety of Taguchi-optimized three-way catalyst were 4.7 times higher than that of existent three-way catalyst.