• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.8
• /
• pp.1510-1518
• /
• 2006

As a promising technology that enables ubiquitous computing and leads IT(information Technology) industries of next generation, the exciting new field of sensor networks is attracting so much attention and considered to be the one of the hottest research topics these days. From now on, all the each node, forming a network, and even the sensor network itself will interact with the generic network and evolve dynamically according to the change of environment with the perpetual creation and extinction. In this paper, we purpose the dynamic address interworking scheme for interactive networking between sensor network and Internet(IPv6). Proposed scheme is enable to interworking dynamically between sensor network address scheme based on Zigbee and Internet address scheme based on IP. Additionally, we implement the proposed address interworking scheme using Berkeley TinyOS, mica motes, and IP protocol. And, we verify the proposed scheme by the interconnection experimental between wireless sensor networks and Internet based on IPv4/IPv6.

• Journal of Korea Multimedia Society
• /
• v.9 no.11
• /
• pp.1474-1482
• /
• 2006

Recently, it is advanced about the variable research of IPv6 and the wireless sensor network. However, the existed researches are not enough about the internetworking technology between the wireless sensor network and the Internet based on IPv6 for supporting ubiquitous service. Accordingly, this paper proposes two internetworking models for connecting the wireless sensor network and Internet based on IPv6. The relay router in the first model and the sink node of the wireless sensor network in the second mode] were used as a gateway. Then we analyze and compare with two internetworking models. Additionally we construct the test-bed connected between the wireless sensor network and KOREN(KOrea advanced REsearch Network) based on IPv6 using the first model. And we verified the operation of the test-bed by experiments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.4
• /
• pp.376-384
• /
• 2009

In this article, we demonstrate that the asymmetric key-based architecture for securing wireless sensor networks recently introduced by Haque et al. is insecure under impersonation attack, since it does not provide authentication semantics. In addition, we show that, for the scheme to work correctly, the resulting key distribution construction should be symmetric and group-wise.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.532-535
• /
• 2003

Vibration of rotating machinery is a factor that is something to do with abnormal machinery. Former days, Perception of vibration at rotating machinery had used Shaft rider type. Shaft rider type was adhered to surface of shaft and detected vibration of rotating machinery. Recently, Perception of vibration at rotating machinery uses to non-contact sensor. Working principle of non-contact sensor is used of eddy current. Vibration at rotating machinery appears to deviation of eddy current. In this paper, We investigate abnormal vibration due to non-contact sensor.

• Journal of the military operations research society of Korea
• /
• v.34 no.3
• /
• pp.53-66
• /
• 2008

Information Grid that connects Sensor Grid and Shooter Grid with network is the core infrastructure to enable the NCW concept. The U.S. DoD(Department of Defense) has developed the GIG(Global Information Grid) as the Information Grid that connects all of the DoD mission areas. Then the U.S. DoD has incrementally constructed GIG. In this respect, the case of the U.S. DoD's GIG construction refers to materializing ROK Information Grid concept. Therefore we studied the U.S. DoD's GIG construction trend and analyzed ROK's GIG construction trend. In result this paper proposes the way to develop and construct ROK's GIG.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.835-839
• /
• 2004

For factory automation using force/torque control, we need a networked-force management system as well as good force sensing and force generation. In this paper, we present a web-based force management system including 6-axis force/torque sensing system. Performance of the force-torque sensor is affected significantly by analog noise that is included in a sensor signal, and the noise should be reduced appropriately to obtain an adequate performance of the sensor. Moreover, the sensor itself should be convenient to install to a real application system. It should be compact in size and also easy to wire in real situation. In this viewpoint, we developed usb-based compact sensor system which is well communicated using web between two computers that exist far away. Software is programmed using LabVIEW and CCS-C. PIC microcontrollers are used for implementing a compact hardware. The proposed system is verified through experimental works.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.3
• /
• pp.562-568
• /
• 2010

In this paper, a low cost magnetic position sensor for linear position detection is proposed. The proposed magnetic sensor can be applied to the linear motor which has stator with periodical teeth, such as transverse flux linear motor(TFLM). Sine and cosine waves can be generated from the unit sensor module as the linear motor moves, and the outputs can be converted to the position data by interpolation IC. To reduce the speed ripple caused by the position error, the Luenberg observer is introduced. The validity of the proposed magnetic position sensor is verified by experiment with a 750N three-phase TFLM.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.1117-1120
• /
• 2005

최근 유비쿼터스 컴퓨팅의 핵심 기술인 센서 네트워크 기술이 활발하게 연구되고 있는 실정이다. 이에 다양한 센서 노드 기술이 개발되면서 각기 다른 종류의 센서 노드로 구성된 이기종의 센서 네트워크의 연동에 관한 연구가 활발히 진행되고 있다. 기존에 제안된 이기종 센서 네트워크의 통합, 관리를 위한 기술은 구현이 복잡하고, 각각의 노드에 많은 연산 부하가 발생하며, 기존의 시스템을 사용하지 못해 비효율적이다. 본 연구에서 제안하는 Overlay Sensor Network는 전체 센서 네트워크의 상위에 정의되어지는 네트워크로, Overlay Sensor Network를 구성하는 Base Station 노드가 각기 다른 센서 네트워크의 데이터를 연동함으로서 노드의 연산 부하를 줄이고, 기존에 구현된 센서 네트워크와 시스템을 사용함으로서 구현의 복잡성을 줄이며 효율성은 높이는 것이 가능하다. 본 연구에서는 이기종 센서 네트워크의 통합과 관리를 위한 Overlay Sensor Network를 제안하고, 그에 따른 시스템을 설계하고 구현하고자 한다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.217-219
• /
• 2010

Sensor modeling is the basic step to extract and to use the information from satellite images. Sensor modeling requires ground control points. If we use a single image, we have limitations on modeling about images captured from regions that we can not approach or take GCPs. In this research, we use strip images to do sensor modeling by two methods. At first, we apply sensor modeiling to single image and apply the results by extrapolation. Next, we consider strip images to single image. As a result, we find the second method is more accurate about whole image.

• Journal of Convergence Society for SMB
• /
• v.4 no.4
• /
• pp.1-6
• /
• 2014

A wireless sensor network is being actively researched around the world that are connected to the mesh are a plurality of sensor nodes in a wireless manner that span different regions of the techniques. However, wireless communications use the limitation of resources, so it is very weak due to the properties of the network itself secure in comparison to the normal network. Wireless sensor network is divided into tapped-based attacks, forgery based attacks, denial of service attacks based largely by securities laws must defend against various attacks such as insertion of the wrong information being sent eavesdropping or modification of information, which is usually sensor network applications need to do. The countermeasure of sensor network attack is described in this research, and it will contribute to establish a secure sensor network communication.