• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.376-378
• /
• 1995

A method is presented for the design and fabrication of the temperature compensation circuits on the Clark electrodes for measuring the dissolved oxygen(DO) concentration. The discussion includes a method of the sensor interface circuits for the DO sensor. Typical polarograms for the DO probes under test using this sensor circuits are presented. High accuracy over 99 % of the I to V conversion using the proposed circuit is verified. Temperature dependence for the test DO probe is well compensated automatically using the thermistor($2k\Omega,\;25^{\circ}C$) in series with correction resistor in the feedback loop of the op-amp circuit in the temperature range of the 0-50$^{\circ}C$.

• Journal of Broadcast Engineering
• /
• v.22 no.1
• /
• pp.51-61
• /
• 2017

This paper proposes a method to generate panoramic images by combining conventional feature extraction algorithms (e.g., SIFT, SURF, MPEG-7 CDVS) with sensed data from an inertia sensor to enhance the stitching results. The challenge of image stitching increases when the images are taken from two different mobile phones with no posture calibration. Using inertia sensor data obtained by the mobile phone, images with different yaw angles, pitch angles, roll angles are preprocessed and adjusted before performing stitching process. Performance of stitching (e.g., feature extraction time, inlier point numbers, stitching accuracy) between conventional feature extraction algorithms is reported along with the stitching performance with/without using the inertia sensor data.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.63-70
• /
• 2015

The numerous improved schemes of user authentication based on password have been proposed in order to prevent the data access from the unauthorized person. The importance of user authentication has been remarkably growing in the expanding application areas of wireless sensor networks. Recently, emerging wireless sensor networks possesses a hierarchy among the nodes which are divided into cluster heads and sensor nodes. Such hierarchical wireless sensor networks have more operational advantages by reducing the energy consumption and traffic load. In 2012, Das et al. proposed a user authentication scheme to be applicable for the hierarchical wireless sensor networks. Das et al. claimed that their scheme is effectively secure against the various security flaws. In this paper, author will prove that Das et al.'s scheme is still vulnerable to man-in-the-middle attack, password guessing/change attack and does not support mutual authentication between the user and the cluster heads.

• Journal of Korea Multimedia Society
• /
• v.11 no.11
• /
• pp.1547-1554
• /
• 2008

This paper proposes a fire shunt guidance system model based on rule, it presents suitable shunt route in real-time according to collected fire information of the building inside using wireless sensor networks. So, this system model is composed of the sensor alert module, the behavior suggestion module, and the emergency device control module. The sensor alert module uses rule-base algorithm that monitored the information to collect periodically in wireless sensor networks. And, the behavior suggestion module proposed a suitable behavior, this module supports to judge the fire area with danger sensor list. Additional, the emergency device control module controls a related emergency device according to the suggested behavior and to present on a control screen. We experiment the fire shunt guidance system based on Internet Web for operation verification of the proposed system. Consequently, this study supports people safety with the behavior suggestion according to the context information when an emergency situation happens.

• The Journal of Society for e-Business Studies
• /
• v.15 no.4
• /
• pp.1-19
• /
• 2010

Recently, it is necessary to process real time sensor data, which is generated from ubiquitous environments. Data, which are written by XML, are small, but, large volumes of data. Therefore, weneed to use an efficient method for processing a large amount of it. An XQuery has two types for sensor data: one is to get sensor identification and value from sensor data; the other is restructuring for user's convenience. Existing XQuery engines don't have efficient method for batch processing of sensor data. This paper proposed the twig query processing over reverse path summary, and we developed and applied restructuring batch processing method for real time processing of a large amount of sensor data. Finally, we do performance evaluation using XMark and RFID EPC data, and comparison analysis with MonetDB/XQuery and Berkeley DB XML.

• Journal of KIISE:Databases
• /
• v.37 no.6
• /
• pp.324-332
• /
• 2010

The majority of event detection in real-time embedded sensor network systems is based on data fusion that uses noisy sensor data collected from complicated real-world environments. Current research has produced several excellent low-level mechanisms to collect sensor data and perform aggregation. However, solutions that enable these systems to provide real-time data processing using readings from heterogeneous sensors and subsequently detect complex events of interest in real-time fashion need further research. We are developing real-time event detection approaches which allow light-weight data fusion and do not require significant computing resources. Underlying the event detection framework is a collection of real-time monitoring and fusion mechanisms that are invoked upon the arrival of sensor data. The combination of these mechanisms and the framework has the potential to significantly improve the timeliness and reduce the resource requirements of embedded sensor networks. In addition to that, we discuss about a privacy that is foundation technique for trusted embedded sensor network system and explain anonymization technique to ensure privacy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.11
• /
• pp.1364-1370
• /
• 2019

Tilt sensors are mainly used to measure the collapse of structures such as buildings, bridges and tunnels. Recently, due to the ease of use and low price, many tilt sensors using MEMS sensors have been used, but the measurement angle range is limited, and thus, they do not have high precision for 360 degree. This is due to the inherent offset and scale errors of MEMS sensors. In this paper, we proposed an algorithm for the calculation of precision angles to reduce the mechanical error of MEMS sensors, and produced a MEMS sensor module and a transmission module to compare the angle accuracy of sensor modules before calibration and the angle measurement accuracy after calibration. Experimental results show that the proposed technique has a precision of ± 0.015 degrees for all 360-degree.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1019-1028
• /
• 2021

Emergency exit guidance lights were designed and manufactured to quickly determine the location of the emergency exit in the event of a fire using a gas sensor, an illumination sensor, a temperature sensor, an Arduino Uno, and a Bluetooth module. This research was designed such that, when a fire breaks out, a red arrow appears as the illuminance value is low and a green arrow as the illuminance value is high to improve visibility when detecting high temperature and smoke. In addition, it is designed to prevent more serious conflagration by applying an alarm sound and text transmission algorithm using a communication module to transmit text messages indicating a 174Hz alarm sound and a fire location to prevent more serious conflagration.

• Journal of Sensor Science and Technology
• /
• v.8 no.1
• /
• pp.80-88
• /
• 1999

This paper deals with the position determination problem of stereo camera systems used as a sensor for 3D robotic manipulation. Stereo cameras having parallel rays of sight and been set up on the same baseline are assumed. The distance between the sensor and the space measured is determined so as to get insensitive parameters to the uncertainty of control points used for calibration and to satisfy the error condition set by considering the repeatability of the robot. The baseline width is determined by minimizing the mutual effect of 3D positional error and stereo image coordinate error. Unlike existing techniques, the technique proposed here is developed without complicated constraints and modelling process of the object to be observed. Thus, the technique of this paper is more general and its effectiveness is proved by simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2459-2464
• /
• 2009

In sensor network there are no nodes or servers that are exclusively responsible for packet forwarding and routing. Instead, sensor nodes participating in network communications perform these activities. Thus, they are vulnerable to the alteration and forgery of message in the process of packet forwarding and routing. To solve this problem, a security to ensure authentication and integrity of routing and forwarding messages should be required. To do this, we propose the hash chain-based digital signature model where it takes less time to compute in generating and verifying the digital signature model, unlike he public key-based digital signature model, and verify if this model is proper by comparing computation times between tow models.