• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1136-1139
• /
• 2009

Recently, various Ni doping systems and thermal annealing systems have been developed for fabrication of polycrystalline silicon film using SGS (super grain silicon) for medium and largesize AMOLED panels. In this study, we compare the potential of Ni doping systems including ALD (atomic layer deposition), AMD (atmospheric metal deposition), in-line sputter, and crystallization annealing systems including batch type furnace, inline furnace, and RTA (rapid thermal annealing) developed for the SGS method. Additional requirements for those systems to be used for mass production of large AMOLED TVs are suggested based on evaluation results for both poly-Si films and TFT backplanes.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.10-13
• /
• 2009

We have developed variety of LCD technologies for the out-door display, which improve out-door readability as well as reliability from external impacts. This improvement was made possible by new approach on LCD cell optical design and modification of LCD surface, which allows surrounding light to be transmitted to enhance the visibility and at the same time filtering out light, which are considered to be source of noise in terms of visibility. This technology enables users to maintain high display performance in both in-door & out-door environments moreover alternatively choosing in-door/out-door.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1002-1004
• /
• 2009

Solution-processed indium-gallium-zinc-oxide thin-film transistors were fabricated by sol-gel method. By a combinatorial study of InGaZnO multi-component system, optimum molar ratio of In, Ga, and Zn has been selected. By adjusting the In:Ga:Zn molar ratio, TFTs with field-effect mobility of 0.5 ~ 1.5 $cm^2$/V-s, threshold voltage of -5 ~ 5 V, and subthreshold slope of 1.5 ~ 2.5 V/decade were achieved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.697-699
• /
• 2009

Optical properties of white organic light-emitting devices (WOLEDs) fabricated utilizing a phosphor layer acting as a color conversion layer were investigated. The WOLEDs were achieved due to the enhancement in the color conversion efficiency of the phosphor layer, and the chromaticity coordinates of WOLEDs were (0.29, 0.33).

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.672-676
• /
• 2009

Polymide is widely used alignment material of recent commercial LCD panel structure. Generally, polyimide alignment material is classified soluble polyimide type and polyamic acid type with their main bond structure of solution state. specially, compared to polyamic acid alignment layer, soluble polyimide type alignment layer have excellent reliability during long term LCD driving cause of their high imidazation ratio(%), high voltage holding ratio(%) and low ion density. The other side, this type alignment materials has significant DC image stickicng side effect for using in-plane switching mode lcd structure cause of their slow DC discharging property. we applied inorganic salt to usual soluble polyimide type alignment layer and found out this technique had good DC image sticking property without any loss of reliability property in inplane switching LCD cell structure. This approach leads excellent DC image sticking property with maintaining high reliability property this approach confirmed improves an image sticking and a reliability simultaneously from the horizontality aligned LCD mode whose relatively bad image sticking property.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.229-230
• /
• 2009

This paper proposes a new design of ultra-slim color mixing lens (CML) for backlight unit (BLU), and presents simulated performance of the design. The novel color mixing structure has a shorter mixing length (< 1cm) than the existing color mixing structure, and achieves high efficiency and uniformity.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.900-903
• /
• 2007

We introduce non-contact surface modification using trimethylchlorosilane (TMCS) for thin film transistor application. The surface is not contacted to the TMCS solution because it is vaporized at room temperature. The hydrophobic surface with contact angle $of\;{\sim}\;70^{\circ}$ can be achieved by the transfer of TMCS using a PDMS mold.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.671-674
• /
• 2007

We report on the fabrication and characterization of an OLED with an anode completed using screenprintable conducting polymer containing PEDOT: PSS. The demonstration of this organic transparent anode for OLEDs shows a good possibility for flexible displays using this polymeric electrode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.538-541
• /
• 2007

In this paper, with a bistable curve of the bistable chiral splay nematic liquid crystal (BCSN LC) device, we clarify how the twist-to-splay transition is achieved under a horizontal field. By a sufficiently high horizontal electric field, the bistable property becomes monostable. The transition can be achieved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.479-482
• /
• 2007

For high performance driving carbon nanotube backlight units, their phosphor must be well studied. This paper experimentally evaluates their activating speed and persisting duration properties. They are proven to be the most efficiency related factors. High performance driving schemes are derived from them and implemented in this paper.