• Journal of the Semiconductor & Display Technology
• /
• v.13 no.3
• /
• pp.13-19
• /
• 2014

Phosphoric acid was used as etching agent instead of conventional peroxide - based chemicals for forming pattern of ultra definition display. Etchant was synthesized by mixing etching agent, oxidation agent, buffer solution, and additive into solvent, deionized water. Thicknesses of copper, main metal of ultra definition display, for etching, were 10,000 and $30,000{{\AA}}$. Etch stop of good low skew for proper pattern formation has been occurred at the content ratio of phosphoric acid 60 - 64%, nitric acid 4 - 5%, additive(potassium acetate) 1 - 3%. Buffer solution(acetic acid) decreased the metal contact angle $63.07^{\circ}$ to $42.49^{\circ}$ for benefiting pattern formation. Content variations on four components (phosphoric acid, nitric acid, acetic acid, potassium acetic acid) of the etchant with storage time were within 3 wt% after 24 hrs of etching work.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.513-516
• /
• 2009

The cross-talk, which occurs due to the phosphor decay time, is a critical problem in the 3D PDP TV. First, we investigated the factors that affected the cross-talk in waveforms. After the investigation, we designed the driving waveforms for the 3D PDP TV. We also obtained a better result by controlling the driving timing of 3D active glasses.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.854-857
• /
• 2009

The concept of a microplasma current switch for a device operated in a current mode like organic light-emitting diodes, which features matrix addressability and current switching, is presented as well as its architecture and operational principle. To verify the concept, we have fabricated a 100 mm ${\times}$ 100 mm microplasma current switch panel with a cell pitch of $1080{\mu}m{\times}1080{\mu}m$. Moreover, the current-voltage measurements of the unit cell are performed for three different driving voltage amplitudes. They show the characteristic of an asymmetric floating double probe diagnosing plasmas.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.218-220
• /
• 2009

We proposed an enhanced substrate-assembling technique using adhesive patterned spacers for flexible liquid crystal displays (LCDs). The negative photoresister was used for the rigid columnar spacers and the strong substrate-bonding agent. The proposed technique is expected to be a good candidate for manufacturing method of flexible LCDs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.510-512
• /
• 2009

A volumetric 3D display system based on a rotating two dimensional color LED array is set up. It has a cylinder display space ${\Phi}800{\times}640mm3$ which is composed of 256 slices of pictures in one 3D image with each slice $320{\times}256$ LED pixels. The volumetric image has 4 gray scales and 64 colors. The main structure and working principle of the system is described in detail.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.91-94
• /
• 2009

We propose advanced liquid crystal display (LCD) modes through surface modification using UV curable reactive mesogen (RM) mixed with alignment layers. The LC directors on the modified alignment layer are controlled and memorized by the polymerized RMs under an applied voltage. Using the method proposed here, we can improve the response time and viewing angle characteristics through surface controlled patterned vertical alignment (SC-PVA) mode and 8-domains PVA mode, respectively. Also, we found that the method can be applicable to fabricate multi-domain structures using multiple UV exposure as same as conventional UV alignment method.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.339-341
• /
• 2009

A transparent plasma display was developed using transparent glass barrier ribs. Glass barrier ribs were fabricated via a wet etching process. Glass barrier ribs created using a top and bottom etching process showed better transparency compared to those created through only a top etching process. A see-through phosphor layer was obtained by coating the sidewall of the barrier ribs with a conventional opaque phosphor. A fabricated prototype of a transparent plasma display was clear enough to see the background beyond the panel and was well operated by a conventional driving scheme. The maximum luminance was 1150 cd/$m^2$ and the maximum luminous efficacy was 1.35 lm/W in a Ne+13.5%Xe gas-mixture and green cells.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.354-355
• /
• 2009

In the fabrication of inverted top-emitting organic light emitting diodes (ITOLEDs), the sputtering process is needed for deposition of transparent conducting oxide (TCO) as top anode. Energetic particle bombardment, however, changes the physical properties of underlying layers. In this study, we examined plasma process effects on tungsten oxide ($WO_3$) hole injection layer (HIL). From our results, we suggest the theoretical mechanism to explain the correlation between the physical property changes caused by plasma process on $WO_3$ HIL and degradation of device performances.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.356-359
• /
• 2009

In recent years, flexible e-paper displays based on electrophorectic materials continue to attract enormous interest from technologists and are expected to be in the market soon. To realize a flexible e-paper, several key technologies for TFT backplane have been developed, while it still lacks good color reproduction and requires input function for use in its various applications. Thus, the technical issues for implementing color and touch functions in a flexible e-paper are discussed, and then our development status along with technology trend of it is described.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.42-45
• /
• 2009

We report simple structure red phosphorescent devices comprising only single organic layer structure. Maximum current efficiency of 9.44 cd/A and the driving voltage of 5.4 V are obtained in this single layer structure PHOLEDs, respectively. The mixed host system using electron transporting and hole transporting materials doped with $Ir(piq)_3$ provides such high efficiency and reasonable driving voltage. The principal to simplification is the direct charges injection from the metallic electrodes into mixed host materials.