• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.4
• /
• pp.43-51
• /
• 2005

Due to rapid and reckless economic development, natural resources of the national land have been damaged and polluted. Accordingly, the necessity for environment-friendly development has been on the rise and many have made efforts to assess the environmental value of the national land. This study divides the conservation areas by means of using relative elevation, slope, and development of housing land based on environmental evaluation of the national land. The relative elevation is obtained by the difference of altitude at the edge of the forest patch extracted from the land cover classification map based on the ridgeline, and the slope is obtained by environment-oriented land suitability analysis. The development of housing land is classified in accordance with the progress of each project. Twenty-six evaluation criteria are divided into five different grades using the minimal indicator approach and then sub-divided into ten grades by means of using the following two scenarios. The first one uses the weight of input materials while the second one relies on the size of patches that are emphasized in landscape ecology. Consequently, such a study demonstrated the following results. The method relying on the weight of input materials revealed the limitation of emphasizing input materials excessively, whereas the method of considering the size of patches resulted in the division of conservation areas that embody regional characteristics. This study is meaningful in that it classifies the conservation areas by reflecting the regional characteristics and the ecological values of animals and plants.

• Plant Resources
• /
• v.3 no.2
• /
• pp.138-147
• /
• 2000

This examination of vegetation is conducted from June to Oct. 1999 through on the spot survey, centering on the habitat of Abies koreana around Imgeolryeong, Jangteomok, and Jeseokbong in Mt Jiri and Yeongsil path and Seongpanak path in Mt. Halla. Species composition tables of the Abies koreana community by altitude and slope in Mt. Jiri and Mt. Halla are made based on the community composition tables examined in quadrat. The Abies koreana-Saso quelpaertensis community in a west slope of Mt. Halla is found that Abies koreana of 4-6m in height forms subtree layer and that of 8-9m in height the tree layer and it reflects a difference between community structure by slope and main composition species. While the tree layer of Abies koreana community is 12-14 in height around the area of 1,290-1,560m above the sea of Imgeolryong and path from Baekmudong to Jangteomok, it is 8-12m in height in the area of 1,680-1,780m above the sea of path from Jangteomok to Jeseokbong. It means that community structure depends on area and attitude. This study finds out that commonly appearing composition species similar to coverage and presence are Lepisorus thunberianus, Quercus mongolica, Solidago virga-aurea var. asiatica, Ligularia fischeri, Carex lanceolata, Clintonia udensis, Magnolia sieboldii, Betula ermani, Acer pseudo-sieboldianum. As soil environment of surveyed area, pH of surveyed spots is similar in Mt. Jiri and Mt. Halla, electrical conductivity is higher in Mt Jiri, and contents of organic matter is relatively higher in a west slope of Mt. Jiri and Mt. Halla and lower in their south and west slopes. Contents of organic matter and total nitrogen show that the area of 1,550m above the sea in a west slope of Mt. Halla is some higher. For pH and contents of total nitrogen and organic matter, Mt. Halla is higher than Mt. Jiri but for electrical conductivity, Mt. Jiri is relatively higher than Mt. Halla.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.7
• /
• pp.1001-1006
• /
• 2011

To determine the efficiency of copper (Cu) supplementation, a feeding experiment was carried out with 240 day old broiler chicks (vencobb-100). Birds were divided into four dietary treatments: i) C - no additives, ii) $T_1$-75 mg inclusion of Cu/kg diet, iii) $T_2$-150 mg inclusion of Cu/kg diet, iv) $T_3$-250 mg inclusion of Cu/kg diet. The present study was carried out in the Department of Animal Physiology, West Bengal University of Animal and Fishery Sciences, Kolkata, India for a period of 42 days (6 weeks). Growth performance was measured in terms of live weight gain, cumulative feed intake and feed conversion ratio at the end of $21^{st}$ and $42^{nd}$ day of the experiment and the result was found to be encouraging for commercial enterprises when the chickens were fed at 150 mg Cu/kg ($T_2$) of their diet. Excess dietary copper more than 150 mg/kg reduced the haemoglobin (Hb) concentration in blood and resulted in the accumulation of copper in the liver with decreased blood Hb concentration and packed cell volumes (PCV). Copper supplementation increased the total erythrocyte count (TEC) as copper is involved in erythropoiesis. But, from the result it is indicated that the dietary copper concentration could not alter the total leukocyte count (TLC). In case of different leucocytes count (DLC), there were no significant differences observed among the different treated groups. Statistical analysis showed significant (p<0.01) difference in plasma concentration of copper, zinc, ferrous and cholesterol among the different copper treated groups. The result indicates that supplementation of copper is an effective way of improving the production performance and haematological parameters in broiler chicken.

• Journal of Environmental Science International
• /
• v.19 no.8
• /
• pp.983-999
• /
• 2010

Wind power energy is one of the favorable and fast growing renewable energies. It is most important for exact analysis of wind to evaluate and forecast the wind power energy. The purpose of this study is to improve the performance of numerical atmospheric model by data assimilation over a complex coastal area. The benefit of the profiler is its high temporal resolution and dense observation data at the lower troposphere. Three wind profiler sites used in this study are inhomogeneously situated near south-western coastal area of Korean Peninsula. The method of the data assimilation for using the profiler to the model simulation is the three-dimensional variational data assimilation (3DVAR). The experiment of two cases, with/without assimilation, were conducted for how to effect on model results with wind profiler data. It was found that the assimilated case shows the more reasonable results than the other case compared with vertical observation and surface Automatic Weather Station(AWS) data. Although the effect of sonde data was better than profiler at a higher altitude, the profiler data improves the model performance at lower atmosphere. Comparison with the results of 4 June and 5 June suggests that the efficiency with hourly assimilated profiler data is strongly influenced by synoptic conditions. The reduction rate of Normalized Mean Error(NME), mean bias normalized by averaged wind speed of observation, on 4 June was 28% which was larger than 13% of 5 June. In order to examine the difference in wind power energy, the wind power density(WPD) was calculated and compared.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.4
• /
• pp.470-482
• /
• 2008

Seasonal variations of chemical composition and optical properties of aerosols at Seoul and Gosan were investigated using the ground-based aerosol measurements and an optical model calculation. The mass fraction of elemental carbon was $8{\sim}17%$, but its contribution on light absorption was high up to $29{\sim}48%$ in Seoul. In Gosan, the contribution of water soluble aerosols on aerosol extinction was $83{\sim}94%$ due to the high mass fraction of these particles in the range of $56{\sim}88%$. Model calculation showed that the water holding capacity of aerosols was larger in Gosan than in Seoul because of higher relative humidity and temperature along with abundant water soluble aerosols. Difference between measured and calculated aerosol optical depths was the highest in summer. This was because aerosol optical depth calculated from ground-based measurements could not consider aerosol loadings at high altitude in spite of high column-integrated aerosol loadings observed by Sun photometer. Although hygroscopic growth was expected to be dominant in summer, the mass concentration of water soluble aerosols was too low to permit this growth.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.2
• /
• pp.161-170
• /
• 2017

In this study, the characteristics of a horizontal sundial from the Joseon Dynasty were investigated. Korea's Treasure No. 840 (T840) is a Western-style horizontal sundial where hour-lines and solar-term-lines are engraved. The inscription of this sundial indicates that the latitude (altitude of the north celestial pole) is $37^{\circ}$ 39', but the gnomon is lost. In the present study, the latitude of the sundial and the length of the gnomon were estimated based only on the hour-lines and solar-term-lines of the horizontal sundial. When statistically calculated from the convergent point obtained by extending the hour-lines, the latitude of this sundial was $37^{\circ}$ $15^{\prime}{\pm}26^{\prime}$, which showed a 24' difference from the record of the inscription. When it was also assumed that a convergent point is changeable, the estimation of the sundial's latitude was found to be sensitive to the variation of this point. This study found that T840 used a vertical gnomon, that is, perpendicular to the horizontal plane, rather than an inclined triangular gnomon, and a horn-shaped mark like a vertical gnomon is cut on its surface. The length of the gnomon engraved on the artifact was 43.1 mm, and in the present study was statistically calculated as $43.7{\pm}0.7mm$. In addition, the position of the gnomon according to the original inscription and our calculation showed an error of 0.3 mm.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.2
• /
• pp.81-89
• /
• 2006

The purpose of this study was to evaluate the applicability of small RC(radio controlled) helicopter and single lens reflect camera as SFAP(Small Format Aerial Photography) aquisition system to monitor the vegetation coverage of wetland. The system used to take pictures of small artificial wetland were a common optical camera(Nikon F80 with manual lens whose focal length was 28mm) attached to the bottom of a RC helicopter with a 50 cubic inch size glow engine. Three hundreds pictures were taken at the altitude of 50m above the ground, from 23rd June to 7th September 2005. Four from the images were selected and scanned to digital images whose dimension were 2048${\times}$1357 pixels. Those images were processed and rectified with GCP(Ground Control Poins) and digital map, and then classified by the supervised- classification module of image processing program PG-steamer Version 2.2. The major findings were as follows ; 1. The final images processed had very high spatial resolution so that the objects bigger than 30mm like lotus(Nelumbo nucifera), rock and deck were easily identified. 2. The dominant plants of the monitoring site were Monochoria ragianlis, Typha latifolia, Beckmannia syzigachne etc. Because those species have narrow and long leaves and form irregular biomass, the individuals were hardly identifiable, but the distribution of population were easily identifiable depending on the color difference. 3. The area covered by vegetation was rapidly increased during the first month of monitoring. At the beginning of the monitoring 23th June 2005, The rate of area covered by vegetation were only 34%, but after 27 and 60 days it increased to 74%, and the 86% respectively.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.30 no.6
• /
• pp.66-78
• /
• 2003

The purpose of this study was to minimize the forest disturbance around an entry road of a power transmission tower construction site between Taean and Sinsesan, Chungnam. The main study field was classified into existing materials and a GIS, remote sensing analysis, and a field examination. This information was used to identify the most suitable entry road using a degree of green naturality map, eco-naturality map, actual vegetation map, and a forest state map as the existing materials. Also, the study used an normalized difference vegetation index, altitude and slope map in order to make the evaluation materials which used an remote sensing image, and GIS. This data was used to choose an optimum area, and diagnosed the current condition of the vegetation with a field survey of the area. It analyzed vegetation structure, species diversity, the age of trees in a field examination. Subsequently, we proposed four area types based on the analysis results--preservation area, transplantation area, restoration area and development area. As a result, the preservation area was categorized into 8 grades, according to the degree of green naturality, large area of breast diameter at Pinus densiflora community, competition area of Pinus densiflora and Quercus spp. and Quercus spp. community of over 20 years old. A transplantation area established 46 optimum areas according to the GIS analysis and vegetation investigation results. Vegetation restoration plan for disturbance area should be made based on ecological value of existing vegetation to worthwhile area as Quercus spp. mixing forest proposed. The development area selected a ecological worthless place as an artificial forest where Pinus densiflora and Pinus thunbergii growth is poor. This research results suggest that restoration of vegetation will be possible in the real world. Also, ecological restoration guidelines will be made through building and analyzing data base and routine monitoring of transplantation and restoration area.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.1
• /
• pp.127-136
• /
• 2006

Shaded relief is used in the analysis of digital terrain model, but accurate shadow zone has not been affirmed on account of idea only shadow of terrain that would be in shadow are shaded. This study is to analyze each display difference of a digital terrain model by grasping the shadow characteristics of terrain and comparing shaded relief function used terrain display of GIS with a rendering technique. After terrain with road in subject area is selected and created to digital terrain model of TIN, shaded relief and rendering according to altitude and azimuth of the sun at 9:00 am and 3:00 pm is applied. As the results, only backward portions of the terrain that is in shadow from the sunlight are shaded in case of shaded relief. The rendering created the shadow, which is cast by terrain features. By these mutual comparison, this study represented data for understanding of shaded relief. And it is expected that the rendering method could be used to analyze sunshine influence.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.3
• /
• pp.203-216
• /
• 2011

To prepare for a future Korean lunar orbiter mission, semi-optimal lunar capture orbits using finite thrust are designed and analyzed. Finite burn delta-V losses during lunar capture sequence are also analyzed by comparing those with values derived with impulsive thrusts in previous research. To design a hypothetical lunar capture sequence, two different intermediate capture orbits having orbital periods of about 12 hours and 3.5 hours are assumed, and final mission operation orbit around the Moon is assumed to be 100 km altitude with 90 degree of inclination. For the performance of the on-board thruster, three different performances (150 N with $I_{sp}$ of 200 seconds, 300 N with $I_{sp}$ of 250 seconds, 450 N with $I_{sp}$ of 300 seconds) are assumed, to provide a broad range of estimates of delta-V losses. As expected, it is found that the finite burn-arc sweeps almost symmetric orbital portions with respect to the perilune vector to minimize the delta-Vs required to achieve the final orbit. In addition, a difference of up to about 2% delta-V can occur during the lunar capture sequences with the use of assumed engine configurations, compared to scenarios with impulsive thrust. However, these delta-V losses will differ for every assumed lunar explorer's on-board thrust capability. Therefore, at the early stage of mission planning, careful consideration must be made while estimating mission budgets, particularly if the preliminary mission studies were assumed using impulsive thrust. The results provided in this paper are expected to lead to further progress in the design field of Korea's lunar orbiter mission, particularly the lunar capture sequences using finite thrust.