• Korean Journal of Environment and Ecology
• /
• v.37 no.3
• /
• pp.182-191
• /
• 2023

This study was carried out to identify the distribution and growth characteristics and evaluate the conservation status of the Michelia compressa Maxim., a rare and endangered wild plant II, in the habitats in Korea. A total of 314 individuals were found in the natural habitats of Heuksan Island and Jeju Island and were divided into four populations. About 45.9% (144 individuals) were distributed in the range of 401m~500m above sea level. The average height of trees was 2.7(±4.8)m, the diameter at breast height was 12.6(±13.9)cm, and the number of branches was 1.0(±0.5) on average. 54.3% of the sapling individuals of M. compressa were distributed within a radius of 30 m from the mother tree, 25.8% were distributed between 31 m through 40 m, and most (90.1%) were distributed within a radius of 60 m. The fact that sapling individuals of M. compressa are not identified even around some mature individuals and appear only in extremely limited areas is estimated to be closely related to the growth conditions as well as the environment of the natural habitats. The dispersal of M. compressa is presumed to be related to the birds and natural seedlings because water puddles, a resting place for birds beyond the range of natural seedlings, characterize its habitats. The IUCN Red List evaluation criteria at the regional and national level of M. compressa corresponds to the Critically Endangered category, and the domestic population under the category of "CR B2ab(v); C2a(i); D."

• Journal of Bio-Environment Control
• /
• v.32 no.3
• /
• pp.226-233
• /
• 2023

High solar radiation in summer season causes excessive respiration of crops and reduces photosynthesis. In addition, the rainy season, which mainly occurs in summer, causes a low light condition inside the greenhouse. A low light condition can reduce crop growth and yield. This study was conducted to evaluate the effect of shade and supplemental lighting on the growth and yield of cucumber during summer season. Cucumber grafted seedlings were transplanted in two plastic greenhouses on August 30, 2022. To reduce the light intensity inside the greenhouse, a 50% shading screen was installed in one greenhouse. Supplemental lighting was conducted from September 7, 2022 to October 20, 2022. HPS (high-pressure sodium lamp), W LED (white LED, red:green:blue = 5:3:2), and RB LED (combined red and blue LED, red:blue = 7:3) were used for supplemental lighting sources, and non-treated (nonsupplemental lighting) was as the control. The supplemental lighting was conducted before sunrise and after sunset for 2 hours with a photosynthetic photon flux density of 150 ± 20 µmol·m^-2·s^-1. The plant height, leaf length, leaf width, and SPAD value tended to increase in the shading group. RB LED increased stem diameter regardless of shading treatment. Fresh and dry weights of fruits were not significantly different in shading and supplemental lighting. Average fresh weight of fruits was not significantly different among supplemental lighting as the harvest date passed. In conclusion, in this study 50% shade treatment significantly improved the growth of cucumber during the summer season. In addition, the growth and fruit characteristics are better than the control without supplemental lighting. This study can be used as basic research data for applying supplemental lighting technology to cucumber cultivation.

• Korean Journal of Ichthyology
• /
• v.35 no.2
• /
• pp.91-100
• /
• 2023

The early life history of Silurus microdorsalis living in Jahocheon Stream was studied by observing egg and morphological development. Live fish were captured in June 2018, then reared in a circulating filtration system under a 14L : 10D photoperiod with a water temperature of 18℃. To artificially induce spawning, females were injected with 0.5 mL of Ovaprim (Syndel, Nanaimo, BC, Canada) per kg of body weight, and males were injected with 10,000 IU/kg body weight of human chorionic gonadotropin. Approximately 15 h later, eggs were artificially inseminated by the dry method. Mature eggs were light pale yellow, which separated them from immature eggs. Fertilized eggs were 2.16±0.06 mm (n=8) in diameter and fully hatched at 181 h after fertilization. The fertilization rate was 63.1±2.2%, and 10.0±3.7% of the embryos were malformed at 18℃. The rates of development were 181 h at 18℃, 109 h at 21℃, and 76 h at 24℃. The larval size immediately after hatching was 4.64±0.22 mm (n=8), and the larvae displayed negative phototaxis at 1 day after hatching. The total larval length on 7 days after hatching was 12.47±0.53 mm, with 25~30 basal anal fin rays and 14~16 basal caudal fin rays observed. The total larval length was 14.13±0.51 mm on 9 days after hatching, and approximately 90% of the black endoplasmic reticulum was deposited on the head and body. The dorsal fin had formed, and a single basal body was observed. On 15 days after hatching, the total larval length was 16.69±0.31 mm; the number of basal caudal fin rays (18 poles) was an integer because 2 dorsal fin basal rays and 60~63 anal fin basal rays were observed. The total larval length was 28.96±1.10 mm on 50 days after hatching; the numbers of caudal fins (n=18), dorsal fins (n=3), pectoral fins (n=11), and anal fin basal rays (n=67~73) were integers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6C
• /
• pp.395-406
• /
• 2006

Drilled shafts are a common foundation solution for large concentrated loads. Such piles are generally constructed by drilling through softer soils into rock and the section of the shaft which is drilled through rock contributes most of the load bearing capacity. Drilled shafts derive their bearing capacity from both shaft and base resistance components. The length and diameter of the rock socket must be sufficient to carry the loads imposed on the pile safely without excessive settlements. The base resistance component can contribute significantly to the ultimate capacity of the pile. However, the shaft resistance is typically mobilized at considerably smaller pile movements than that of the base. In addition, the base response can be adversely affected by any debris that is left in the bottom of the socket. The reliability of base response therefore depends on the use of a construction and inspection technique which leaves the socket free of debris. This may be difficult and costly to achieve, particularly in deep sockets, which are often drilled under water or drilling slurry. As a consequence of these factors, shaft resistance generally dominates pile performance at working loads. The efforts to improve the prediction of drilled shaft performance are therefore primarily concerned with the complex mechanisms of shaft resistance development. The shaft resistance only is concerned in this study. The nature of the interface between the concrete pile shaft and the surrounding rock is critically important to the performance of the pile, and is heavily influenced by the construction practices. In this study, the influences of asperity characteristics such as the heights and angles, the strength characteristics and elastic constants of surrounding rock masses and the depth and length of rock socket, et. al. on the shaft resistance of drilled shafts are investigated from elasto-plastic analyses( FLAC). Through the parametric studies, among the parameters, the vertical stress on the top layer of socket, the height of asperity and cohesion and poison's ratio of rock masses are major influence factors on the unit peak shaft resistance.

• Journal of the Korean Society of International Agriculture
• /
• v.31 no.3
• /
• pp.278-285
• /
• 2019

The experiment was implemented to gain basic data for stable proso millet (Panicum miliaceum L.) production through germination viability and establishment uniformity based on seed refining under seed selection with specific gravity of proso millet seed. Seeds of three proso millet cultivars were carefully selected by adjusting NaCl into 9 levels (1.000, 1.005, 1.010, 1.015, 1.020, 1.025, 1.030, 1.035, 1.04 g·L^-1), and their standard germination rate, seeding quality and field emergence rate were investigated. Proso millets showed heavier thousand seed weight as specific gravity high. In standard germination, all of the 3 cultivars of selected seeding showed at least 91% germination rate. With respect to the 1.040 g·L^-1 selection by specific gravity, 'Hwanggeum' had 98.9%, 'Ibaekchal', 99.4%, and 'Hwangsilchal', 98.9%, recording the highest. Seeding quality was investigated and it was found that, compared with the non-selected seeds, selected seeds had longer plant heights and averaged 2.0, 2.2 and 1.9 cm, respectably. In terms of leaf length, only 'Hwanggeum' and 'Ibaekchal' showed distinctive differences. No significance was found in stem diameter and SPAD. The seeds selected using specific gravity all had longer or heavier average root length, root weight and stem weight. Compared with non-selected seeds, the specific gravity of 1.040 g·L^-1 had longer root lengths of 2.9, 3.0 and 2.9 cm. 1.040 g·L^-1 was also found to have the heaviest root weight, and stem weight. The field emergence viability investigation found significance solely in the mean emergence time (MET) by the cultivar. High significance was found in percent emergence (PE) and emergence rate index (ERI) in the specific gravity for the selection of seeds. All of the three cultivars showed higher PE and ERI as specific gravity selection high. The 1.040 g·L^-1 specific gravity selection had the highest PE of 90.7, 85.3 and 92.8%. For productivity increase based on improved proso millet germination rate and enhanced establishment uniformity, it seems favorable to employ 1.040 g·L^-1 specific gravity selection using salt solution.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.61-70
• /
• 2019

"Jungmo2510", a rye cultivar, Secale cereal L., was developed by National Institute of Crop Science, RDA in 2015. It was developed from open pollination from within 10 rye cultivars or lines including "Chochun" in 1995. The line "SR95POP-S1-523-1-5-5-4-7-3-B-16-3-19" was selected for its excellent agronomic appearance and was placed in yield trials for two years from 2011 to 2012. The line was designated "Homil55" and was placed in regional yield trials at the four locations around Korea from 2013 to 2015, during which time the name "Jungmo2510" was given. This cultivar is an erect plant type and leaves of short and broad size with a green color, a yellow colored, medium-diameter culm, and a yellowish brown-colored, medium-size grain. The heading date of "Jungmo2510" was April 16, which were 2 days earlier than that of "Gogu". "Jungmo2510" also showed similar to winter hardiness and greater resistance to lodging compared to those of the check cultivar. Over three years, the average dry matter yield of "Jungmo2510" was 802 kg 10a^-1 , which was harvested in late April and was lower than that of the check cultivar "Gogu" (825 kg). The seed productivity of "Jungmo2510" was approximately 481 kg 10a^-1 , which was 2.4% less than that of the check. "Jungmo2510" was higher to than "Gogu" in term of protein content (9.1% and 8.0%, respectively), total digestible nutrients(TDN)(57.5% and 55.5%, respectively), and TDN yield 10a^-1(419 kg and 392 kg, respectively). This cultivar is recommended as a fall sowing crop in areas where the average daily minimum-mean temperatures are higher than -12 ℃ in January, and as a winter crop for whole-crop forage before the planting of rice or green manure around Korea.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.417-425
• /
• 2023

The aim of this study was to derive stem taper equations for Quercus acuta, one of main evergreen broad-leaved tree species found in warm temperate regions, and to prepare a stem volume table using those stem taper equations. A total of 688 individual trees were used in the analysis, which were collected from Jeonnam-do, Gyeongnam-do, and Jeju-do. The stem taper models applied to derive the stem curve pattern were the Max and Burkhart, Kozak, and Lee models. Among the three stem taper models, the best explanation of the stem curve shape of Q. acuta was found to be given by the Kozak model, which showed a fitness index of 0.9583, bias of 0.0352, percentage of estimated standard error of 1.1439, and mean absolute deviation of 0.6751. Thus, the stem taper of Q. acuta was estimated using the Kozak model. Moreover,thestemvolumecalculationwasperforme d by applying the Smalian formula to the diameter and height of each stem interval. In addition, an analysis of variance (ANOVA) was conducted to compare the two existing Q. acuta stem volume tables (2007 and 2010) and the newly created stem volume table (2023). This analysis revealed that the stem volume table constructed in the Wando region in 2007 included about twice as much as the stem volume tables constructed in 2010 and 2023. The stem volume table (2023) developed in this study is not only based on the regional collection range and number of utilized trees but also on a sound scientific basis. Therefore, it can be used at the national level as an official stem volume table for Q. acuta.

• Journal of Korean Society of Forest Science
• /
• v.113 no.2
• /
• pp.222-238
• /
• 2024

Coniferous species in subalpine ecosystems are known to be highly sensitive to climate change. Therefore, it is becoming increasingly important to monitor community and population dynamics. This study monitored 37 plots within the distribution area of Abies koreana on Mt. Jirisan for a period of eight years. We analyzed the importance value, density of living stems, mortality rate, recruitment rate, basal area, DBH (diameter of breast height) class distribution, and tree health status. Our results showed changes in the importance value based on the tree stratum, with A. koreana decreasing by 3.6% and Tripterygium regelii increasing by 2.5% in the tree layer. Between 2015 and 2023, there were 149 dead trees/ha (17.99% mortality rate) and 12 living trees/ha (1.02% recruitment rate) of A. koreana. The decrease in basal area was attributed to a decrease in the number of living trees. Tree mortality occurred in all DBH classes, with a particularly high decline in the <10 cm class (65 trees/ha reduced). In terms of changes in tree health status, the population of alive standing (AS) type trees, initially consisting of 539 trees/ha, has been transformed into alive standing (AS), alive lean (AL), and death standing (DS), accounting for 69.7%, 0.5%, and 13.8%, respectively. Meanwhile, DS-type trees have transitioned into dead broken (DB) and dead fallen (DF) types. This phenomenon is believed to be caused by strong winds in the subalpine region that pull up the rootlets from the soil. Further research on this finding is recommended.

• Korean Journal of Ichthyology
• /
• v.35 no.4
• /
• pp.263-269
• /
• 2023

This study aims to contribute to the research on resource recovery for the rapidly declining population of Liparis tanakae by observing the larval development process and the morphology of juveniles based on their growth. Natural spawning eggs collected in Yeosu were used for observing the process of egg development and larval morphology. The water temperature during the rearing process was maintained at 12.3~13.5℃ (average 12.7℃). The fertilized eggs had an egg diameter ranging from 1.57 to 1.79 mm (average 1.71 mm) and were spherical and adhesive. Within 4 hours 35 minutes after fertilization, they reached the two-cell stage, and after 74 hours 10 minutes, the formation of the yolk sac began. At 106 hours post-fertilization, a caudal fin appeared at the tail tip. Hatching began at 526 hours, and the larvae developed with the yolk sac positioned just behind the eyes. The newly hatched larvae had both the mouth and anus open. Melanophores appeared inside the lower jaw and around the tail on the third day after hatching. By the 16th day after hatching, most of the yolk was absorbed, and melanophores were visible in the head region. Finally, on the 63rd day after hatching, the head region significantly developed, and the body shape and mouth were similar to those of an adult fish, signifying the transition to the juvenile stage. This study will serve as valuable data for aquaculture techniques related to the conservation and restoration of fish species based on the hatching and juvenile morphology of Liparis tanakae.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.3
• /
• pp.190-199
• /
• 2008

To investigate hydrographic structure and characteristics of the tropical ocean in the eastern and the western Pacific, CTD(Conductivity-Temperature-Depth) data along $131^{\circ}W$ and $137^{\circ}-142^{\circ}E$ in July-August 2005 were analyzed. Sea surface temperature along $131.5^{\circ}W$ in summer is highest in the Equatorial Counter Current(ECC) because of the high-temperature water greater than $28^{\circ}C$ moving through the ECC from the western Pacific to the eastern Pacific in spring and summer. Based on the evidence of the presence of low salinity and high dissolved oxygen water in the North Equatorial Current(NEC), we suggested that the low salinity water moved from the Gulf of Panama to the east of Philippine along the North Equatorial Current(NEC). The South Equatorial Current(SEC) had the most saline water from surface to deep layer because the saline water from the Subtropical South Pacific Ocean moved to the north. The salinity minimum layer was observed at 500-1500 m depth along $131.5^{\circ}W$. The water mass with the salinity minimum layer in the north of $5^{\circ}N$ came from the North Pacific Intermediate Water(NPIW) and that in the south of $5^{\circ}N$ came from the Antarctic Intermediate Water(AAIW), which was more saline than the NPIW. Cyclonic cold eddy with a diameter of about 200km was found in $4-6^{\circ}N$. Sea surface temperature along $131.5^{\circ}W$ in the eastern Pacific was lower than along $137^{\circ}-142^{\circ}E$ in the western Pacific; on the other hand, sea surface salinity in the eastern Pacific was higher than in the western Pacific. Subsurface saline water from the Subtropical South Pacific Ocean was less saline in the eastern Pacific than in the western Pacific. Salinity and density(${\sigma}_{\theta}$) of the salinity minimum layer south of $14^{\circ}N$ was higher in the eastern Pacific than in the western Pacific.