• Design & Manufacturing
• /
• v.6 no.1
• /
• pp.39-44
• /
• 2012

Hot tool steel, in general, has not been used as a material in hot forging. However such a hot tool steel is recently applied to forging materials by recent forging technology. DH32 is known as a kind of hot tool steels, which is developed for characteristics of excellent strength and toughness in high temperature. Feasibility of DH32 to hot forging material has been researched to develop the hot forging technology of a plunger used for a large-sized marine fuel pump. Hot compression experimental works were performed to investigate the hot strain characteristic of DH32 and with the experimental results FE simulations were also conducted for the design of forging processes and preform. It is found out through the hot compression experimental works that DH32 has a hot brittleness at more than $1150^{\circ}C$.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.39-41
• /
• 2004

This paper demonstrates the in-house development of the subsystem C&DH in a D-SAT satellite project of Astronautic Technology (M) Sdn. Bhd. (ATSB). D-SAT is a non-imaging satellite. It will carry a dosimeter as the payload for scientific objectives. Since one of the D-SAT project establishment intended objectives is to demonstrate the research and development skill of the ATSB engineers on the satellite system building, most of the subsystems of the D-SAT are developed in-house including the C&DH subsystem. C&DH subsystem plays an important role for managing data handling tasks and general operation of the satellite system. The C&DH development includes the research and study on the hardware and software design, the design of both the hardware and software, the development of the software system, the integration between the software and the hardware system and the implementation of the subsystem into the satellite system. This program allows ATSB to accomplish the engineers with expertise not only in the C&DH subsystem but other subsystems too besides developing knowledge in the management of a space project that covers not only on the technical issues but issues relating to the economic, political and legal issues.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.649-656
• /
• 2002

This paper addresses the phase noise analysis of high-speed DH-PLL(Digital Hybrid Phase-Locked Loops) frequency synthesizer. Because of the additional quantization noise of D/A converter in DH-PLL, the phase noise of DH-PLL is increased than the conventional PLL. Three kinds of noise sources such as reference input, D/A converter, and VCO(Voltage Controlled Oscillator) are considered to analyze the phase noise. It largely depends on the closed loop bandwidth and frequency synthesis division ratio(N) so that we can decide the optimal closed loop bandwidth to minimize the phase noise of DH-PLL. It is shown that the simulation results closely match with the results of analytical approach.

• Asian review of World Histories
• /
• v.2 no.2
• /
• pp.169-195
• /
• 2014

This paper presents an investigation into cross-cultural transfiguration of Buddhist faith in Goryeo Dynasty, with a focus on $\acute{S}\bar{u}$raṃgama-s$\bar{u}$tra that used to be in vogue in East Asia. There are three major types of $\acute{S}\bar{u}$raṃgama-s$\bar{u}$tra faith in Goryeo: the first one was concerned about the scripture itself including its citation and publication and the compilation of its annotation books; the second one involved establishing Buddhist rituals related to the scripture; and the final one was to create Dh$\bar{a}$ran$\bar{i}$ stone poles with Dafoding Dh$\bar{a}$ran$\bar{i}$ in Volume 7 of the scripture engraved in stone. While it was the common practice to engrave Zunsheng Dh$\bar{a}$ran$\bar{i}$ in China, the number of stone poles on which Dafoding Dh$\bar{a}$ran$\bar{i}$ was engraved was overwhelmingly large. There are a couple of reasons behind the difference: first, there was a tendency of Zunsheng Dh$\bar{a}$ran$\bar{i}$ being worshiped at the national level in Goryeo, which probably explains why the percentage of Zunsheng Dh$\bar{a}$ran$\bar{i}$ stone poles designed to pray for a personal mass for the dead by engraving Dh$\bar{a}$ran$\bar{i}$ on a stone pole was considerably low. In addition, there were esoteric sects in Goryeo, and it is estimated that they must have got involved in the establishment of Dafoding Dh$\bar{a}$ran$\bar{i}$ stone poles in the former half of Goryeo. Furthermore, the Zen sects had a deep non-Zen understanding of Esoteric Buddhism and tended to practice Dh$\bar{a}$ran$\bar{i}$ in Goryeo. It is estimated that Dafoding Dh$\bar{a}$ran$\bar{i}$ stone poles were set up in large numbers in Goryeo as the prevalence of $\acute{S}\bar{u}$raṃgama-s$\bar{u}$tra faith that continued on since the former half of Goryeo was combined with the Zen sects' active position about Dh$\bar{a}$ran$\bar{i}$.

• Journal of Broadcast Engineering
• /
• v.26 no.3
• /
• pp.296-307
• /
• 2021

A digital hologram (DH) is an ultra-high value-added video content that includes 3D information in 2D data. Therefore, its intellectual property rights must be protected for its distribution. For this, this paper proposes a watermarking method of DH using a deep neural network. This method is a watermark (WM) invisibility, attack robustness, and blind watermarking method that does not use host information in WM extraction. The proposed network consists of four sub-networks: pre-processing for each of the host and WM, WM embedding watermark, and WM extracting watermark. This network expand the WM data to the host instead of shrinking host data to WM and concatenate it to the host to insert the WM by considering the characteristics of a DH having a strong high frequency component. In addition, in the training of this network, the difference in performance according to the data distribution property of DH is identified, and a method of selecting a training data set with the best performance in all types of DH is presented. The proposed method is tested for various types and strengths of attacks to show its performance. It also shows that this method has high practicality as it operates independently of the resolution of the host DH and WM data.

• The Korean Journal of Food And Nutrition
• /
• v.23 no.4
• /
• pp.526-530
• /
• 2010

Isopentenyl diphosphate(IPP) isomerization to dimethylallyl diphosphate(DMAPP) is an important step for the efficient production of isoprenoids such as lycopene, ${\beta}$-carotene, astaxanthin, etc. The type II isopentenyl diphosphate isomerase gene from Synechocystis sp. PCC6803(sll1556, Syidi2) was cloned and expressed in Escherichia coli $DH5{\alpha}$. When E. coli $DH5{\alpha}$ harboring lycopene synthesis genes, crtE, crtB, and crtI and mevalonate pathway genes, MvK1, MvK2, and Mvd, was cultured on LB medium containing mevalonate, the strain grew very slowly be due to the toxicity of isopentenyl diphosphate derived from mevalonate. When Syidi2 was introduced to E. coli $DH5{\alpha}$ harboring the lycopene synthesis genes and mevalonate pathway genes, growth on mevalonate medium was fully restored and the colony showed red color indicating lycopene formation. The growth rate of the mutant strain, E. coli $DH5{\alpha}$(idi::${\Delta}km$), was very slow because of IPP accumulation and DMAPP deprivation. Ultimately the idi mutant was complemented by introducing the Syidi2 gene.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1994.11a
• /
• pp.98-98
• /
• 1994

최근 청색반도체레이저의 실현을 위하여 ZnSe가 대표하는 II-Ⅵ족 화합물반도체와 Gan가 대표하는 III족 질화물반도체분야에서 집중적인 연구가 이루어지고 있으며, 아직까지 실용화 되지 않고 있는 청색반도체레이저의 출현에 대하여 많은관심이 모아지고 있다. III족 질화물반도체는 InM(Eg:1.9eV)부터 AIN(Eg: 6.2eV)에 이르기까지 전 조성영역에서 완전한 고용체를 이루며, 실온에서 직접천이형 에너지 대구조를 가지므로 청색 혹은 자외영역에서 동작하는 발광소자를 제작하는데 있어 유망시 되고 있는 소재이다. 특히 GaN와 InN의 3원흔정인 GaInN를 활성층으로 이용하면 그 발전파장을 370nm부터 650nm까지 즉 가시 전 영역으로부터 근 자외영역을 포함할 수 있게 된다. 이 연구에서는 AIGaN/GaInN 이중이종접합(DH) 구조의 고아여기에 의한 유도방출고아의 편광 특성을 조사하였다. 유기금속기상에피텍셜(MOVPE)법으로 성장한 AIGaN/GaInN DH 구조의 표면에 수직으로 펄스 발진 질소레이저(파장: 337.1cm, 주기 10Hz, 폭: 8nsec) 빔을 조사하고 DH구조의 단면으로부터의 유도방출광을 편광기를 통과 시킨 후 스펙트럼을 측정하였다. 입사고아 밀도가 증가함에 따라 약 402nm의 파장에서 유도발출에 의한 가도가 큰 피크가 나타났고, 그 반치폭은 약 18meV이었다. 실온에서 AIGaN/GaInN DH 구조로 부터의 유도방출에 필요한 입사광밀도의 임계치는 약 130㎾/$\textrm{cm}^2$이었다. 한편 편광각이 90$^{\circ}$일때는 발광스펙트럼의 강도가 매우 낮고 단지 자연방출에 의한 스펙트럼만이 나타났다. 편광각이 0$^{\circ}$일 때 최대의 방출광 강도를 나타내었으며, 편광각이 -90$^{\circ}$로 회전함에 따라 발고아강도의 강도가 감소하였다. 이와 같은 결과는 광여기에 의하여 AIGaN/GaInN DH 로 부터의 유도방출광이 GaInN활성층의 단면에 평행한 전기장의방향으로, 즉 TE모드로 선형적으로 편광됨을 의미한다. AIGaN/GanN DH 로 부터의 유도방출이 선형적으로 TE모드로 편광되는 것은 이 구조를 이용한 청색 및 자외선 반도체 레이저다이오드의 실현에 매우 유익한 것이다.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.9
• /
• pp.3901-3906
• /
• 2014

Aim: The purpose of this study was to investigate anti-tumor effects and safety of DH332, a new ${\beta}$-carboline alkaloids derivatives in vitro and in vivo. Materials and Methods: The effects of DH332 on human (RAMOS RA.1) and mouse (J558) B lymphoma cell lines were detected using a CCK-8 kit (Cell Counting Kit-8), and apoptosis was detected by flow cytometry with PI/annexinV staining. Western blotting was used to detected caspase-3 and caspase-8. Neurotoxic and anti-tumor effects were evaluated in animal experiments. Results: DH332 exerts a lower neurotoxicity compared with harmine. It also possesses strong antitumor effects against two B cell lymphoma cell lines with low $IC_{50s}$. Moreover, DH332 could inhibit the proliferation and induce the apoptosis of RAMOS RA.1 and J558 cell lines in a dose-dependent manner. Our results suggest that DH332 triggers apoptosis by mainly activating the caspase signaling pathway. In vivo studies of tumor-bearing BALB/c mice showed that DH332 significantly inhibited growth of J558 xenograft tumors. Conclusions: DH332 exerts effective antitumor activity in vitro and in vivo, and has the potential to be a promising drug candidate for lymphoma therapy.

• Horticultural Science & Technology
• /
• v.29 no.2
• /
• pp.135-143
• /
• 2011

In the Doritaenopsis hybrid, like most of the orchid species and hybrids, temperature is crucial for the vegetative-to-reproductive transition, and low temperature is required for bud differentiation. To understand the molecular mechanism of this process, an orchid GIGANTEA (GI) gene, DhGI1, was isolated and characterized by using the rapid amplification of cDNA ends (RACE) PCR technique. Sequence analysis showed that the full-length cDNA is 4,022 bp with a major open reading frame of 3,483 bp, and the amino acid sequence showed high similarity to GI proteins in Zea mays, Oryza sativa, Arabidopsis thaliana and other plants. Semi-quantitative RT-PCR revealed that DhGI1 was expressed throughout development and could be detected in roots, stems, leaves, peduncles and flower buds. The expression level of DhGI1 was higher when the plants were flowering at low temperature (22/$18^{\circ}C$ day/night) than the other growth stages. Further analysis indicated that the accumulation of DhGI1 transcripts was significantly increased at low temperature, and concomitantly, initiation of the peduncle was observed. However, DhGI1 levels were low under high temperature (30/$25^{\circ}C$) conditions, and flower initiation was inhibited. These results indicate that the expression of DhGI1 is regulated by low temperature and that DhGI1 may play an important role in inflorescence initiation in this Doritaenopsis hybrid at low temperatures.

• Journal of Korean Academy of Nursing
• /
• v.32 no.5
• /
• pp.727-734
• /
• 2002

This study was to determine the effect of DHEA administration before, during, and after dexamethasone treatment on body weight and TypeI,II muscle weight of rat receiving dexamethasone treatment. Method: Wistar rats were divided into 6 groups: control(C), dexamethasone(D), DHEA administration for 3days after dexamethasone treatment for 7days(7D+3DH), dexamethasone treatment for 7days after DHEA administration for 3days(3DH+7D), DHEA administration during dexamethasone treatment for 4days after dexamethasone treatment for 3days(3D+4DDH), DHEA administration during dexamethasone treatment for 7days(7DDH). Dexamethasone was injected by subcutaneously daily at a dose of 5mg/kg. DHEA was orally administered daily at a dose of 5mg/kg for 7 days. Soleus(TypeI) muscle, and both plantaris and gastro- cnemius(TypeII) muscles were dissected on the 7th day of experiment. Result: Body weight of both 3DH+7D group and 3D+4DDH group increased significantly compared with that of 7D group. Body weight of 7D+3DH group decreased significantly compared with that of 7D group, 7DDH group, 3DH+7D group and 3D+4DDH group. Muscle weight of both plantaris and gastro- cnemius tended to decrease compared with that of 7D group. Muscle weight of 7DDH group, 3D+4DDH group and 3DH+7D group increased significantly compared with that of 7D+3DH group. Muscle weight of gastrocnemius of both 3DH+7D group and 3D+4DDH group increased significantly compared with that of 7D group. Conclusion: Based on these results, it can be suggested that DHEA administration before and during dexamethasone treatment can increase both body weight and mass of atrophied TypeII muscle induced by dexa- methasone treatment.