• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.615-623
• /
• 2008

Wireless LAN (WLAN) has greatly benefited from the introduction of various technologies, such as MAC protocol and scheduling algorithm. The majority of these technologies focus on fairness or service differentiation. However, it is difficult to use these technologies to provide many benefits to WLAN simultaneously because the current WLAN system only focuses on the provision of a single aspect of QoS. Unfortunately, multimedia applications require both service differentiation and fairness. Therefore, this paper combines Distributed Fair Scheduling (DFS) and Enhanced Distributed Coordinate Function (EDCF), to provide both fairness and service differentiation simultaneously. Furthermore, we show numerical analysis using Markov process. The simulation results demonstrate that F-EDCF outperforms the EDCF, in terms of throughput, fairness, and delay viewpoints.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2235-2245
• /
• 2000

The necessity of using rapid prototyping(RP) for short-run manufacturing is continuously driving a development of a cost-effective technique that will produce completely-finished quality parts in a very short time. To meet these demands, the improvements in production speed, accuracy, materials, aid cost are crucial. Thus, a new hybrid-RP system performing both deposition and machining in a station is proposed. For the new hybrid RP process to maintain the same degree of process automation as in currently available processes like SLA or FDNI, a sophisticated process planning system is developed. In the process planner, CAD models(STEP AP203) are partitioned into 3D manufacturable volumes called 'Ueposition feature segment"(DFS) after machining features called "machining feature segmenf'(MFS) are extracted from the initial CAD model. Once MFS and DFS are identified, the process planner arranges them into a chain of processes and automatically generates machining information for each DFS and MFS. The goal of this paper is to present a framework for a process planning system for hybrid RP processes and to outline the geometric algorithms involved in developing such an environment.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.6
• /
• pp.45-53
• /
• 2018

The construction work to establish a safety management plan should be carried out Design for Safety(DFS) task by the designers from May 2016 according to the amendment of the Construction Technology Promotion Act. However, designers lack experience in construction work and lack of information on safety accidents, so it is not easy to predict a disaster that may occur during the construction phase. Therefore, the purpose of this study is to provide information about disasters that can occur in each construction work in order to enable designers to efficiently perform DFS task in the design phase. In this study, the construction work was classified by work unit and the disaster risk assessment was conducted using the Failure Mode and Effect Analysis technique. The disaster information by work unit analyzed in this study can be used to provide designers with an alternative to prevent disasters at the design stage. Disaster information by work unit of apartment construction can be used by designers to prepare an alternative for disaster prevention at the design stage.

• ETRI Journal
• /
• v.44 no.5
• /
• pp.849-858
• /
• 2022

Dynamic voltage frequency scaling (DVFS) has been widely adopted for runtime power management of various processing units. In the case of neural processing units (NPUs), power management of neural network applications is required to adjust the frequency and voltage every layer to consider the power behavior and performance of each layer. Unfortunately, DVFS is inappropriate for layer-wise run-time power management of NPUs due to the long latency of voltage scaling compared with each layer execution time. Because the frequency scaling is fast enough to keep up with each layer, we propose a layerwise dynamic frequency scaling (DFS) technique for an NPU. Our proposed DFS exploits the highest frequency under the power limit of an NPU for each layer. To determine the highest allowable frequency, we build a power model to predict the power consumption of an NPU based on a real measurement on the fabricated NPU. Our evaluation results show that our proposed DFS improves frame per second (FPS) by 33% and saves energy by 14% on average, compared with DVFS.

• Radiation Oncology Journal
• /
• v.33 no.2
• /
• pp.75-82
• /
• 2015

Purpose: We evaluated the prognostic significance of T3 subtypes and the role of adjuvant radiotherapy in patients with resected the American Joint Committee on Cancer stage IIB T3N0M0 non-small cell lung cancer (NSCLC). Materials and Methods: T3N0 NSCLC patients who underwent resection from January 1990 to October 2009 (n = 102) were enrolled and categorized into 6 subgroups according to the extent of invasion: parietal pleura chest wall invasion, mediastinal pleural invasion, diaphragm invasion, separated tumor nodules in the same lobe, endobronchial tumor <2 cm distal to the carina, and tumor-associated collapse. Results: The median overall survival (OS) and disease-free survival (DFS) were 55.3 months and 51.2 months, respectively. In postoperative T3N0M0 patients, the tumor size was a significant prognostic factor for survival (OS, p = 0.035 and DFS, p = 0.035, respectively). Patients with endobronchial tumors within 2 cm of the carina also showed better OS and DFS than those in the other T3 subtypes (p = 0.018 and p = 0.016, respectively). However, adjuvant radiotherapy did not cause any improvement in survival (OS, p = 0.518 and DFS, p = 0.463, respectively). Only patients with mediastinal pleural invasion (n = 25) demonstrated improved OS and DFS after adjuvant radiotherapy (n = 18) (p = 0.012 and p = 0.040, respectively). Conclusion: The T3N0 NSCLC subtype that showed the most favorable prognosis is the one with endobronchial tumors within 2 cm of the carina. Adjuvant radiotherapy is not effective in improving survival outcome in resected T3N0 NSCLC.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.22
• /
• pp.9823-9829
• /
• 2014

Background: High-dose methotrexate (HD-MTX) is recognized as an efficient component of therapy against pediatric osteosarcoma in combination with other drugs such as cisplatin (CDP), carboplatin (CBDCA), doxorubicin (ADM), etoposide (VP-16) and ifosfamide (IFO). Objectives: To demonstrate the feasibility and effectiveness of the HD-MTX/CDP/DOX/VP-16/IFO [MTX(+)] protocol comparable to CDP/ADM/CBDCA/IFO [MTX(-)] for treating childhood osteosarcoma at Ramathibodi Hospital (1999-2014). Materials and Methods: A retrospective analysis was conducted of osteosarcoma patients aged less than 18 years treated with two chemotherapeutic regimens between 1999 and 2014. A total of 45 patients received the MTX(-) and 21 the MTX(+) protocol. Results: Overall limb-salvage and amputation rate were 12.9% and 77.7%, respectively. Kaplan-Meier analysis results for 3-year disease free survival (DFS) and overall survival (OS) regardless of treatment regimens were $43.4{\pm}6.0%$ and $53.2{\pm}6.1%$ respectively. The 3-year DFS and OS were improved significantly with the MTX(+) protocol compared to MTX(-) protocol (p=0.010 and p=0.009, log rank test) [$69.8{\pm}10.5%$, $79.8{\pm}9.1%$ for MTX(+) and $31.1{\pm}6.9%$, $42.2{\pm}7.4%$ for MTX(-) protocol, respectively]. Patients with metastatic osteosarcoma treated with the MTX(+) protocol had statistically significant higher 3-year DFS and OS than those treated with the MTX(-) protocol ($66.7{\pm}13.6%$ and $15.0{\pm}8.0%$ for 3-year DFS, p=0.010, $73.3{\pm}13.2%$ and $20{\pm}8.9%$ for 3-year OS, p=0.006, respectively). The independent risk factors for having inferior 3-year DFS and OS were poor histological response (tumor necrosis <90%) and treatment with the MTX(-) protocol. The multivariate analysis identified only the treatment with the MTX(-) protocol as an independent predictor of inferior OS with a hazard ratio (HR) of 3.53 (95% confidence interval of 1.2-10.41, p=0.022). Conclusions: Our study demonstrated the tolerability, feasibility and efficacy of the HDMTX-based regimen improving the survival rate in pediatric osteosarcoma cases, in line with reports from developed countries.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5219-5223
• /
• 2013

The number of axillary lymph nodes involved and retrieved are important prognostic factors in breast cancer. The purpose of our study was to investigate whether the lymph node ratio (LNR) is a better prognostic factor in predicting disease-free survival (DFS) for breast cancer patients as compared with pN staging. The analysis was based on 804 breast cancer patients who had underwent axillary lymph node dissection between 1999 and 2008 in Sun Yat-Sen University Cancer Center. Optimal cutoff points of LNR were calculated using X-tile software and validated by bootstrapping. Patients were then divided into three groups (low-, intermediate-, and high-risk) according to the cutoff points. Predicting risk factors for relapse were performed according to Cox proportional hazards analysis. DFS was estimated using the Kaplan-Meier method and compared by the log-rank test. The 5-year DFS rate decreased significantly with increasing LNRs and pN. Univariate analysis found that the pT, pN, LNR, molecule type, HER2, pTNM stage and radiotherapy well classified patients with significantly different prognosis. By multivariate analysis, only LNR classification was retained as an independent prognostic factor. Furthermore, there was a significant prognostic difference among different LNR categories for pN2 category, but no apparent prognostic difference was seen between different pN categories in any LNR category. Therefore, LNR rather than pN staging is preferable in predicting DFS in node positive breast cancer patients, and routine clinical decision-making should take the LNR into consideration.

• Journal of dental hygiene science
• /
• v.10 no.5
• /
• pp.357-363
• /
• 2010

The aim of this study was to measure the dental anxiety, the factors associated with dental anxiety and the utilization behavior of dental treatment. Modified dental anxiety scale(MDAS) and Dental fear survey(DFS) were used as measurement, where through the mean and the standard deviation were worked out and also the T-test and ANOVA were performed. In relation to MDAS, females and males showed the mean, '$2.86{\pm}0.06$' and '$2.49{\pm}0.06$' (p=0.000). Also, less than 20 and more than 21 showed the mean, '$2.81{\pm}1.01$' and '$2.61{\pm}0.99$' (p=0.023). In relation to dental utilization behavior, the subjects were classified into three groups, a group who uses dental clinics periodically, a group who uses them only when problems arise, and a group who has not ever used them. MDAS indicated a higher value in the group who use dental clinics only when problems arise, which was significant statistically (p=0.000). In the case of MDAS, many respondents answered that they felt anxious in the process of actual treatment; in the case of DFS, they felt anxious due to the factors that cause irritation.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.11a
• /
• pp.381-388
• /
• 2006

많은 6시그마 혁신을 하는 기업 중에서 IS09000 시리즈나 IS0/TS16949 인증을 받고 있다. 그럼에도 불구하고 6시그마 도입 초기부터 ISO/TS16949와 통합운영을 생각하고 추진하는 곳은 많지 않다. ISO/TS16949에서는 기업전반의 프로세스에 많은 중점을 두고 있다. 그 중에서도 APQP(Advanced Product Quality Planning)은 제품 초기에서 부터 명확한 품질계획 업무 프로세스를 가지고 활동을 하라는 필수 프로세스를 요구하고 있다. 그러나 구체적인 Flow나 단계는 각 기업체의 특성에 맞기고 있다. 6시그마의 Lean DFSS는 이러한 제품개발 프로세스의 구체적인 전개단계를 제공 하고 있다. 여기에 APQP에 서 요건으로 명시한 각 프로세스 단계마다 인풋(Input)요소, 아웃풋(Output) 요소, 타켓(Target), 그 프로세스를 책임질 구성원, 핵심성공요인(KSF), 핵심성공지수(KPI), 단계마다의 FMEA(Failure Mode Effect Analysis) 분석을 대응하면 도입 초기에서 부터 상호 유기적이면서 효과적인 System이 된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.247-252
• /
• 2000

In this paper, we discuss frequency allocation and sharing for high speed radio access network in domestic 5㎓ the band. In order to evaluate the possibility of frequency sharing between meterological radar and high speed radio access network we analyses radio interference of meterological radar by means of minimum coupling loss method and Monte Carlo simulation And simulations show that it is necessary to use DFS(Dynamic Frequency Selection) scheme for frequency sharing between meterological radar and high speed radio access network.