• 한국소음진동공학회논문집
• /
• 제25권10호
• /
• pp.707-713
• /
• 2015

This paper proposes experimental results for control performance deterioration of a piezoelectric actuator under high temperature conditions due to external heat environment. In this work, a heat environment from 30 ℃ to 190 ℃ is established by a heat chamber which is capable of high temperature of heat environment. Inside the heat chamber, an experimental apparatus consisting of the stack type of piezoelectric actuator, laser sensor, gap sensor and temperature sensor is established. After evaluating temperature dependent blocking force, displacement and time response of a piezoelectric actuator inside the heat chamber, tracking control performances are evaluated under various temperature conditions via proportional-integral-derivative(PID) feedback controller. The desired position trajectory has a sinusoidal wave form with a fixed frequency. Control performances are experimentally evaluated at both room temperature and high temperature and presented in time domain.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3398-3405
• /
• 2021

This study observed the effect of neutron irradiation and ageing on the microstructure, hardness, and corrosion resistance of SAV-1 (Al-Mg-Si) alloy. The investigated material was irradiated with neutrons to fluences of 10²¹-10²⁶ n/m² in the WWR-K research reactor and kept in dry storage. Long-term irradiation led to an increase in hardness of the alloy and a deterioration of pitting corrosion resistance. Post-irradiation ageing for 1 h at 100-300 ℃ resulted in a decrease in microhardness of the irradiated SAV-1. The effect of post-irradiation ageing on pitting corrosion was made clear through the formation of Guinier-Preston zones and secondary precipitates in the Al matrix. Ageing at 250 ℃ corresponded to the development of stable microstructure and the highest corrosion resistance for the irradiated samples. Mg₂Si, Si, and needle-shaped β" precipitates were formed in SAV-1 alloy that was irradiated with low fluences. β" and clusters of rod-shaped B-type precipitates were observed in highly irradiated samples. The precipitates were similar to those seen in non-irradiated pseudo-binary Al-Mg₂Si alloys with Si excess.

• 한국전기전자재료학회논문지
• /
• 제32권4호
• /
• pp.307-312
• /
• 2019

Transient earth voltage (TEV) signals propagate on metal surfaces when partial discharge (PD) occurs due to the deterioration of insulation performance in the operation of gas-insulated switchgears (GIS). A TEV sensor has advantages of high sensitivity and convenient installation for detecting PD defects. However, the TEV sensor depends on imports in domestic and detailed studies have not been conducted. In this study, a sensor was designed and fabricated by the TEV principle and its response characteristics were evaluated for detecting PD defects, which were simulated as protrusion on conductor (POC), protrusion on enclosure (POE), and free moving particle (FMP) defects. Finally, the PD-induced TEV signals were measured and phase-resolved partial discharge (PRPD) patterns were analyzed to identify the type of defect.

• 대한건축학회논문집:구조계
• /
• 제33권12호
• /
• pp.63-70
• /
• 2017

When industrial by-products like slag and fly ash are using in concrete with cement, it improves strength and durability against external deterioration factors by densifying the structure through potential hydraulic and pozzolanic reaction. But it has been pointed out that high dependence on the quality variation and the curing condition using a admixure material for concrete. In this study, the characteristics of internal micropore structure according to curing condition were analyzed for pastes and mortar specimens under using blast furnace slag powder. As a result, the variation of compressive strength and the internal microstructure were observed according to curing conditions by binder type. Particularly, using blast furnace slag powder, decrease in compressive strength were clearly observed in indoor and carbonation curing compared with water curing. The pore structure analysis also clearly observed the decrease of the gel pore existing in the CSH hydrate layer and the increase of the capillary pore in indoor and carbonation curing compared with water curing condition.

• 한국자기공명학회논문지
• /
• 제26권3호
• /
• pp.24-33
• /
• 2022

The browning phenomenon of fruits can be easily observed when fruits or vegetables (apples, pears, bananas, potatoes, etc.) are cut with a knife and the part turns brown. When this browning occurs, changes in taste, color, and nutrients usually are introduced. The cause of this browning phenomenon has been well studied for a long time, but these studies have mainly focused on preventing deterioration of processed foods during food processing or storage. Resultantly, there are few studies on how much changes in nutrients (saccharides, amino acids, fats, water-soluble low molecular weight ammonium ions, etc.) are caused by browning. The purpose of this study is to determine the change in nutrients during browning using apple as a model fruit. We conducted a comparative study on how much the nutrient fluctuations differ depending on the presence or absence of pretreatment such as the application of heat. All analysis was conducted using ¹H NMR. The ANOVA analysis showed that the concentrations of 4 amino acids (alanine, asparagine, isoleucine, and valine), 3 types of sugars (fructose, glucose, and xylose), 1 type of organic acid (lactate) and choline were significantly increased in samples showing browning. In addition, the groups before and after browning were clearly separated using multivariate statistical analysis methods (PCA, PLS-DA), which was greatly contributed by two sugar components (fructose and glucose) present in high concentrations in apples.

• 한국농공학회논문집
• /
• 제65권1호
• /
• pp.61-72
• /
• 2023

The increase in the rearing intensity of pigs has caused deterioration in the pig house's internal environment such as temperature, humidity, ammonia gas, and so on. Traditionally, the widely used method to control the internal environment was through the manipulation of the ventilation system. However, the conventional ventilation system had a limitation to control the internal environment, prevent livestock disease, save energy, and reduce odor emission. To overcome this problem, the air-recirculated ventilation system was suggested. This system has a semi-closed loop ventilation type. For designing this system, it was essential to evaluate the ventilation rates considering the pressure loss of ducts. Therefore, in this study, pressure loss calculation and experiment were conducted for the quantitative ventilation design of a semi-closed loop system. The results of the experiment showed that the inlet through which external air flows should always be opened. In addition, it was also found that for the optimum design of the semi-closed loop ventilation system, it was appropriate to install a damper or a backflow prevention device rather than a ventilation fan.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권5호
• /
• pp.148-155
• /
• 2017

본 연구에서는 지하 콘크리트 구조물의 누수 균열에 사용되는 주입형 누수보수재료의 품질관리 방안으로 규격화된 국제표준 ISO TS 16774, Part 2 Test method for chemical resistance를 이용하여 현재 우리나라 누수보수현장에서 사용하고 있는 주입형 누수보수재료 2계열(합성고무계, 시멘트계), 3종류 씩, 총 9 종류의 보수재료에 대한 지하 콘크리트 구조물이 처한 화학적 환경의 저항 안정성을 연구 검토하였다. 그 결과, 합성고무계는 RG-3를 제외하고, 산에 대한 저항력을 높일 수 있는 재료적 검토가 필요하고, 시멘트계는 수산화나트륨, 염화나트륨에 대한 저항을 높일 수 있는 재료적 검토의 필요성이 확인되었다. 이러한 결과는 콘크리트 구조물의 화학적 환경에서의 보수재료 선정 시 기본 지표로 사용가능 할 것으로 판단된다. 또한, 추후에 연구 개발 되는 보수재료의 품질 향상에 반영할 수 있는 기준 자료의 활용을 기대할 수 있다.

• 사상체질의학회지
• /
• 제12권1호
• /
• pp.37-47
• /
• 2000

작업자의 기질적 특성, 능력 등을 고려하지 않고 이루어진 작업들은 제조현장의 많은 문제점들이 되고 있으며 이런 결과들은 산업재해 및 직업병의 원인을 제공할 뿐만 아니라 제조경영 관점에서 품질 및 생산성 저하의 결과들을 초래하고 있는 실정이다. 따라서 본 연구에서는 이와 같은 제반 문제점들을 해결하기 위해 중소기업의 작업특성과 사상체질간의 구명을 시도한다. 체질의 기존의 이론인 사상체질(태양인, 태음인, 소양인, 소음인)을 QSCC II와 한의사의 도움으로 실질적인 구분을 실시하고, 체질이론의 공학적 응용의 기존문헌을 고찰한다. 또한 본 연구에서는 농기계 전문생산 업체를 중심으로 특정 사상체질의 작업자 중심으로 주요 작업특성을 해석하고 그 결과 작업자의 체질에 따라 작업특성이 다르게 나타남을 알 수 있다. 한편, 실증적 연구로서 비디오 카메라로 촬영한 작업현장의 장면을 가상현실 장비 및 EEGs를 사용하여 체질변화에 따른 작업자의 뇌파효과를 조사한다. 조사된 뇌파 데이터를 통계분석 처리하여 그 다양한 뇌파 변화의 관계성을 보여준다. 최종 연구결과들은 추후 작업특성간의 비교 연구과정을 통해 기업의 생산성 향상과 품질 증진에 크게 공헌할 것으로 추측된다.

• Corrosion Science and Technology
• /
• 제17권2호
• /
• pp.60-67
• /
• 2018

The compounds associated with corrosion, in metallic archaeological samples of carbon steel of insular origin were evaluated to establish their degree of deterioration and structural damage against air pollution. The iron phases present in samples of archaeological artifacts were detected by Raman spectroscopy and confocal Raman microcopy. These samples mainly exhibited ing mainly ${\beta}$-FeO(OH) type goethite oxyhydroxides and small amounts of akaganeite ${\alpha}$-FeO(OH) lepidocrocite ${\gamma}$-FeO(OH) due to dominant chloride in a marine environment and non-stoichiometric oxyhydroxides Fe (II + / III +) as indicators of early corrosion. Some parts showed the presence of magnetic maghemite indicating high corrosion. ${\gamma}$-FeO(OH) is a precursor of phases associated with advanced marine corrosion. By studying its decomposition by Raman spectroscopy, it was synthesized with the following sequence: ${\gamma}-FeO(OH){\rightarrow}{\alpha}-FeO(OH)+{\gamma}-FeO(OH)$, ${\rightarrow}{\gamma}-Fe_2O_3+Fe_3O_4$. Ferric compounds provided evidence for the effect of intensity of laser on them, constituting a very useful input for the characterization of oxidation of iron in this type of artifacts. Thus, destructive analysis techniques should be avoided in addition to the use of small amounts of specimen.

• 한국환경과학회지
• /
• 제17권1호
• /
• pp.113-118
• /
• 2008

[ $6{\sim}13mg/L$ ] base water concentration on monthly BOD has been kept at the Geukrak bridge point for this research target and it indicates the water quality under the existed rank. Due to this present condition of water quality, the demage of ecology from the upper stream to the lower one of the bridge could be conjectured. Moreover, nonstructural extinction of the ecology seems to have gotten worse between both the streams of Yeoungsan River. On this research, eco-corridor between the upper stream and the lower stream of the river should be ensured, the ecological demage needs to be cut off, a dispersed discharge method which the existed method of the 1st sewage plant in Gwangju was enhanced to should be inducted for the procuring of various water ecosystem, and the conditions by the scenario suggested from this research could be applied to a water quality model. then, analysis the improvement effect of the water quality adjacent the river. From the test result, Case3-Type1 scenario is thought to be the best one. From the test result with Case3-Type1 when the concentrated discharge was never done, 0.07 mg/L of BOD concentration was increased at the lower stream where Yeoungbon B point (Haksan Bridge) is but the water improvement effect of $0.24{\sim}2.87mg/L$ is thought to have been done at the area of water deterioration.