• Journal of Korean Neurosurgical Society
• /
• 제59권3호
• /
• pp.259-268
• /
• 2016

Objective : Accumulation of advanced glycation end-products (AGE) and mitochondrial glycation is importantly implicated in the pathological changes of the brain associated with diabetic complications, Alzheimer disease, and aging. The present study was undertaken to determine whether sildenafil, a type 5 phosphodiesterase type (PDE-5) inhibitor, has beneficial effect on neuronal cells challenged with AGE-induced oxidative stress to preserve their mitochondrial functional integrity. Methods : HT-22 hippocampal neuronal cells were exposed to AGE and changes in the mitochondrial functional parameters were determined. Pretreatment of cells with sildenafil effectively ameliorated these AGE-induced deterioration of mitochondrial functional integrity. Results : AGE-treated cells lost their mitochondrial functional integrity which was estimated by their MTT reduction ability and intracellular ATP concentration. These cells exhibited stimulated generation of reactive oxygen species (ROS), disruption of mitochondrial membrane potential, induction of mitochondrial permeability transition, and release of the cytochrome C, activation of the caspase-3 accompanied by apoptosis. Western blot analyses and qRT-PCR demonstrated that sildenafil increased the expression level of the heme oxygenase-1 (HO-1). CoPP and bilirubin, an inducer of HO-1 and a metabolic product of HO-1, respectively, provided a similar protective effects. On the contrary, the HO-1 inhibitor ZnPP IX blocked the effect of sildenafil. Transfection with HO-1 siRNA significantly reduced the protective effect of sildenafil on the loss of MTT reduction ability and MPT induction in AGE-treated cells. Conclusion : Taken together, our results suggested that sildenafil provides beneficial effect to protect the HT-22 hippocampal neuronal cells against AGE-induced deterioration of mitochondrial integrity, and upregulation of HO-1 is involved in the underlying mechanism.

• Structural Monitoring and Maintenance
• /
• 제2권1호
• /
• pp.35-48
• /
• 2015

The main objective of this study is to evaluate the long-term performance of various concrete composites in natural marine environment prevailing in the Gulf region. Durability assessment studies of such nature are usually carried out under aggressive environments that constitute seawater, chloride and sulfate laden soils and wind, and groundwater conditions. These studies are very vital for sustainable development of marine and off shore reinforced concrete structures of industrial design such as petroleum installations. First round of testing and evaluation, which is presented in this paper, were performed by standard tests under laboratory conditions. Laboratory results presented in this paper will be corroborated with test outcome of ongoing three years field exposure conditions. The field study will include different parameters of investigation for high performance concrete including corrosion inhibitors, type of reinforcement, natural and industrial pozzolanic additives, water to cement ratio, water type, cover thickness, curing conditions, and concrete coatings. Like the laboratory specimens, samples in the field will be monitored for corrosion induced deterioration signs and for any signs of failureover initial period ofthree years. In this paper, laboratory results pertaining to microsilica (SF), ground granulated blast furnace slag (GGBS), epoxy coated rebars and calcium nitrite corrosion inhibitor are very conclusive. Results affirmed that the supplementary cementing materials such as GGBS and SF significantly impacted and enhanced concrete resistivity to chloride ions penetration and hence decrease the corrosion activities on steel bars protected by such concretes. As for epoxy coated rebars applications under high chloride laden conditions, results showed great concern to integrity of the epoxy coating layer on the bar and its stability. On the other hand corrosion inhibiting admixtures such as calcium nitrite proved to be more effective when used in combination with the pozzolanic additives such as GGBS and microsilica.

• 한국건축시공학회지
• /
• 제19권5호
• /
• pp.411-419
• /
• 2019

지하 콘크리트 구조물은 지하라는 지리적 환경 하에 건축되어 열화를 촉진하는 다양한 환경에 노출되어져 있다. 그 중 지하수는 대표적인 열화를 촉진시키는 환경 중 하나로 지상으로부터 전달되는 오염수(공장폐수, 농약, 하수 및 분뇨, 대기 중의 중금속 빗물 등)로 인하여 지하 콘크리트 구조물에 열화를 더욱더 가중시키고 있다. 이에 본 연구에서는 균열부위에 사용되는 누수보수재료에 대한 화학 안정화 판단을 위하여 우리나라 누수보수 시공 현장에서 일반적으로 사용되고 있는 5계열(합성고무계, 시멘트계, 에폭시계, 아크릴계, 우레탄계)의 각 3Type 씩 총 15Type의 누수보수재료에 대한 5가지 수용액(염산, 질산, 황산, 수산화나트륨, 염화나트륨)의 화학저항성능 시험평가를 실시하였다. 그 결과 대체로 대부분의 화학 수용액에서 증감이 나타나고 있지만, 큰 증감을 보여 주고 있는 것은 아크릴계는 염화나트륨과 수산화나트륨에서 확인 되었고, 에폭시계는 염산과 질산에서 나타났다. 시멘트계는 염화나트륨에서 많은 증감을 보여 주고 있다. 이러한 연구 결과를 토대로 신누수보수재료 개발의 화학 안정화를 위한 근간으로 활용되기를 기대한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.159-159
• /
• 2009

Existence of physical moving parts (ex. check valve) produces several problems (mechanical abrasion, deterioration of reliability, limited temperature performances etc.) in driving pumps. To overcome such problems, we proposed a valveless piezoelectric micro-pump which has new type volume transferring mechanism. The proposed micro-pump has a double faced disk type vibrator that can generate peristaltic motion formed by traveling wave in each surface of a disk. This type of micro-pump is able to apply to a fluid supply system that provides two different kinds of fluid simultaneously. In this paper, we propose a simple and novel design of piezoelectric micro-pump that is peristaltically by piezoelectric actuators and allows the removal of the need for valves of other physically moving parts. The finite elements analysis on the proposed pump model was carried out to verify its operation principle using the commercial analysis software.

• 한국주거학회논문집
• /
• 제17권5호
• /
• pp.87-95
• /
• 2006

Building components have been deteriorated by various factors such as location, a building type, a surrounding environment and so on. In addition, each component has a peculiar characteristics, compared with other components in properties of matter an used part. Building components would be required to maintain its function and performance to provide the resident with a decent living condition. It is important to decide the repair time, scope and a required cost in repair plan, considering the each component's characteristics. In this parer, it aimed at providing the economic repair pattern to analyze the relation of the time-elapse and the cumulative repair cost in the apartment housing using 3rd quadratic function. Results of the study are as follows: First, the shape of the function for the economic repair is classified into two type. One is the continuous increase type of the cumulative cost which properly means the iterative repair type after built. The other is that the function has the maximum state at a point which means one-repair after its repair would be delayed to a scheduled time. Second, the iterative repair pattern would include window, roof proof, lighting and water supply pipe. The other repair pattern would include the paintings, heating pipe and sign board.

• 한국재료학회지
• /
• 제6권7호
• /
• pp.678-683
• /
• 1996

In the fabrication processes of thin film thermoelectrics, a subsequent annealing treatment is inevitable to reduce the defects and residual stresses introduced during the film growth, and to make the uniform carrier concentration of the film. However, the diffusion-induced atomic redistribution and the broadening of p/n junction region are expected to affect the thermoelectric properties of thin film modules. The present study intends to investigate the diffusion at the p/n junctions of thermoelectric thin films and to relate it to the property changes. The film junctions of p-type(Bi0.5Sb1.5Te3)and n-type(Bi2Te2.4Se0.6)were prepared by the flash evaporation method. Aluminum thin layer was employed as a diffusion barrier between p-and n-type films of the junction. This was found to be an effective barrier by showing a negligible diffusion into both type films. After annealing treatment, the thermoelectric properties of p/n couples with aluminum barrier layer were accordingly retained their properties without any deterioration.

• 한국주거학회논문집
• /
• 제21권4호
• /
• pp.129-137
• /
• 2010

This study surveys the degree of residents' satisfaction on the current street space to suggest alternatives for the improvement of the street space design in detached house areas. In the results of the survey, we find the following. First, in the result of analysis on age, residential term, having children or not, income level, and type of house ownership, residents are homogeneous in social and economic characteristics. There are similarity in geographical, locational conditions, neighboring facilities, deterioration of residential house, and the time of residential formation among residential areas. Second, satisfactory determinants of residents on street space according to street types, are maintenance, protection of privacy, and parking space. Third, satisfactory determinants of residents on street hierarchy is the inner circulation road while unsatisfactory one is the inner roads. Fourth, age, residential term and type of house ownership are significant factors influencing residents' satisfaction. Factors influencing satisfaction on street space are also affecting total satisfaction and factors associated with street environment are perceived more important ones than factors associated with street activities. Thus we find the degrees of satisfaction for residents on street type and street hierarchy are different despite that general characteristics of residents are similar. We also find residents consider street noise and maintenance as critical factor among physical factors of street space.

• 한국기계가공학회지
• /
• 제15권2호
• /
• pp.97-103
• /
• 2016

When chewing forces are repetitively applied to a dental implant, gaps are often generated at the interface surfaces between the abutment and the fixture, which results in some deterioration, such as loosening of the fastening screw, dental retraction, and fixture fractures. To cope with such problems, a sealing-type abutment having a number of grooves along the conical-surface circumference was previously developed, and it showed better sealing performance than conventional ones. To enhance the sealing performance, a new model in which a gold ring is inserted into the top groove of the sealing-type abutment is developed in this study. In addition, a manufacturing process is developed, and performance evaluations, such as fatigue and sealing tests, are carried out. The evaluation results show that the gold-ring-inserted sealing abutment yields better performance than conventional ones.

• 한국정밀공학회지
• /
• 제33권9호
• /
• pp.769-775
• /
• 2016

Currently, dental implants are widely used as artificial teeth due to their good chewing performance and long life cycle. Generally, a dental implant consists of an abutment as the upper part and a fixture as the lower part. When chewing forces are repeatedly applied to a dental implant, a gap is often generated at the interfacial surface between the abutment and the fixture, and it results in some deterioration such as loosening of the fastening screw, dental retraction and fixture fracture. To enhance the sealing performance for coping with such problems, this study proposes a new sealing-type abutment having a number of grooves along the conical surface circumference, and it carries out finite element analysis in consideration of the external chewing force and pretension between the abutment and the fixture. The result shows that the proposed sealing-type abutment shows an enhanced sealing performance in terms of the contact pressure in comparison with a conventional abutment.

• Journal of Chest Surgery
• /
• 제54권6호
• /
• pp.439-448
• /
• 2021

Remodeling is a commonly encountered term in the field of cardiothoracic surgery that is often used to describe various pathophysiological changes in the dimension, structure, and function of various cardiac chambers, including the aorta. Stanford type A or DeBakey type 1 aortic dissection (TAAD) is a perplexing pathologic condition that can present surgical teams with the need to navigate a maze of complex decision-making. Ascending or hemi-arch replacement leaves behind a significant amount of distal diseased aortic tissue, which might have a persistent false lumen or primary or secondary intimal tears (or communications between lumina), which can lead to dilatation of the aortic arch. Unfavorable aortic remodeling is a major cause of distal aortic deterioration after the index surgery. Cardiac surgeons are aware of post-surgical cardiac chamber remodeling, but the concept of distal aortic remodeling is still idealized. The contemporary literature from established aortic centers supports aggressive management of the residual aortic pathology during the index surgery, and with continuing technical advancements, endovascular stenting options are readily available for patients with TAAD or for complicated type B aortic dissection cases. This review discusses the pathophysiology and treatment options for favorable distal aortic remodeling, as well as its impact on mid- to long-term outcomes following TAAD repair.