• Journal of Welding and Joining
• /
• v.34 no.4
• /
• pp.9-16
• /
• 2016

Metal parts are produced by conventional methods such as casting, forging and cutting, extrusion, etc. However, nowadays, with additive manufacturing (AM), it is possible to directly commercialize by means of stacking of equipment to the 3D drawing and use of high precision tools such as laser source. Thus, drawing of materials is an important aspect in delivering good products. AM deals with production of lighter aircraft parts and few more three-dimensional molds, it wish to manufacture special medical parts and want to steadily expand the new market area. The cost of related equipment and materials are still expensive and difficult to obtain on a mass production. However, the ability to make changes and lead the innovation in the paradigm of traditional manufacturing process is still effective. In this paper, we introduce metal AM and the principles of the related devices, metal powder production process, and their application.

• Food Science and Industry
• /
• v.52 no.1
• /
• pp.32-39
• /
• 2019

The domestic food industry intends to expand overseas market. In order to succeed, in-depth research on local consumers is essential. This paper examined consumer research methodology and case studies based on sensory and consumer science for developing products targeting overseas market. Consumer research should be prece ded by overseas consumer panel construction. Then, this can be followed by application of various consumer research methodologies on new product development process. The most important consideration in this case is that application of same research methods or criteria as for domestic market could lead to significant errors in terms of reliability of results. Therefore, in order to develop successful products that accurately meet the needs of overseas consumers, careful study and consideration of the differences between markets would be essential from consumer researcher and decision-maker's sides.

• BMB Reports
• /
• v.55 no.3
• /
• pp.125-135
• /
• 2022

Continuously renewing the proteome, translation is exquisitely controlled by a number of dedicated factors that interact with the ribosome. The RNA helicase DDX3 belonging to the DEAD box family has emerged as one of the critical regulators of translation, the failure of which is frequently observed in a wide range of proliferative, degenerative, and infectious diseases in humans. DDX3 unwinds double-stranded RNA molecules with coupled ATP hydrolysis and thereby remodels complex RNA structures present in various protein-coding and noncoding RNAs. By interacting with specific features on messenger RNAs (mRNAs) and 18S ribosomal RNA (rRNA), DDX3 facilitates translation, while repressing it under certain conditions. We review recent findings underlying these properties of DDX3 in diverse modes of translation, such as cap-dependent and cap-independent translation initiation, usage of upstream open reading frames, and stress-induced ribonucleoprotein granule formation. We further discuss how disease-associated DDX3 variants alter the translation landscape in the cell.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_1
• /
• pp.941-952
• /
• 2022

In this study, additive manufacturing technology was applied to restore a planner miller that was unusable due to aging. The drive spur gear of the planner miller was inoperable due to many defects in the teeth. The shape of the defective gear teeth was restored by deposition of the defective teeth using the DED method. However, as the location of the deposition head and the location of the set origin became farther, the deposition shape was different from the modeling shape. Nonetheless, since the modeling of the deposition part was designed to be larger than the tooth shape of the original gear, it was possible to completely restore all gear teeth through post-processing. The arrangement interval of the flow lines of the deposition part was narrower than that of the substrate. The hardness of the substrate was 172 HV, and that of the deposition part was 345 HV, which was twice as high as that of the substrate.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.73-82
• /
• 2020

Recently, there has been an increase in additive manufacturing for the fabrication of liquid rocket engines. This technology can innovate conventional fabrication methods to reduce the lead time and manufacturing cost and can enhance the performances such as weight reduction. In this study, a literature survey is presented that includes types, advantages, disadvantages, and foreign government-based projects of the technology related to liquid rocket engine manufacturing. The present survey focuses on the technology that has been applied to various components such as turbopumps and valves while much larger efforts are made for combustion chambers with regenerative cooling channels and diverging nozzles, as the advantages of the technology are maximized for the applications.

• Water for future
• /
• v.28 no.5
• /
• pp.163-174
• /
• 1995

A diffusion hydrodynamic model named "DFLOW-2" for the floodwave analysis from levee-break in protected lowland has been developed. The model has been applied to Ilsan levee-break, which occurred on September 12-13, 1990 in the downstream of the Han River. An unsteady flow analysis has been made in the reach from Indokyo to Junryu. Overflow through broken levee has been treated as internal boundary condition in the channel. A post-processor has been also developed to demonstrate the simulation results. The velocity distributions and inundated depths have been presented. The computed results have good agreements with observed data in terms of inundation depth, flood arrival time and flooded areas.ded areas.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.12
• /
• pp.3986-3994
• /
• 2000

A multiple vector reductive processing occurs during the vector inner product operation ([C] = [A] $\bigodot$,$\square$ [B]) and proceeds at the hardware dyadic pipeline unit. Every scalar result has to be generated with the component merging delay time in the multiple vector reduction($\bigodot$). In this paper we propose a new design method by which the component merging time could be eliminated from the multiple reduction and the scalar results from the reduction($\bigodot$) could be generated nearly in the almost same condensed time as the input components are fel>ded in the dyadic pipeline unitlo) or the output components are drained out of the dyadic pipeline unit($\square$), so called a dedicated chained pipeline unit for only a inner product operation.

• Journal of Nutrition and Health
• /
• v.37 no.4
• /
• pp.310-315
• /
• 2004

The purposes of this study were to: a) develop the quality assessment tool of Web-based Instruction (WBI) for nutrition education, b) evaluate the operated WBI (NutriZone) by this tool, and c) do the feasibility study about quality assessment tool for WBI by establishing the instruction and operating strategies. The developed quality assessment tool of WBI for nutrition education was divided into three categories of instruction design, contents and support ＆ operation. And a total of forty items were measured by Likert 5 point scale, computed as one point per item, and amounted to forty points in all. As a result of evaluation, NutriZone got 21.79 out of 40 points and fulfillment rate of 54.5%. The IPA (Importance-Performance Analysis) was applied to establish the instruction and operating strategies, and nine items characterized as attractiveness, multimedia, and learner-initiative were in 'Doing Great, Keep It Up', and so it was regar-ded as program designed with concern in WBI's characteristics unlike the conventional face-to-face education. But twelve items such as 'Errors on switch to other screens are few.', 'Ready correction leads to be out of systemic error.', 'Highlight marks and moving pictures were used in sign of importance.' and etc. that got high importance and low performance needed to be focused in instructional strategy.

• Transactions of Materials Processing
• /
• v.27 no.5
• /
• pp.314-322
• /
• 2018

AlSi12 is a heat-resistant aluminum alloy that is lightweight, corrosion-resistant, machinable and attracting attention as a functional material in aerospace and automotive industries. For that reason, AlSi12 powder has been used for high performance parts through 3D printing technology. The purpose of this study is to observe deposition characteristics of AlSi12 powder in a direct energy deposition (DED) process (one of the metal 3D printing technologies). In this study, deposition characteristics were investigated according to various process parameters such as laser power, powder feed rate, scan speed, and slicing layer thickness. In the single track deposition experiment, an irregular bead shape and balling or humping of molten metal were formed below a laser power of 1,000 W, and the good-shaped bead was obtained at 1.0 g/min powder feed rate. Similar results were observed in multi-layer deposition. Observation of deposited height after multi-layer deposition revealed that over-deposition occurred at all conditions. To prevent over-deposition, slicing layer thickness was experimentally determined at given conditions. From these results, this study presented practical conditions for good surface quality and accurate geometry of deposits.

• Convergence Security Journal
• /
• v.14 no.6_2
• /
• pp.89-95
• /
• 2014

This study analyzed a correlation between crime and meteorological changes and discomfort index of Seoul and p resented a prediction expression through the regression analysis. For data used in this study, crime data from Januar y 2008 to December 2012 of Seoul Metropolitan Police Agency and meteorological records and discomfort index recor ded in the Meteorological Agency through the portal sites were used. Based on this data, SPSS 18.0 was used for the regression analysis and the analysis of correlation between crime and meteorological changes and discomfort index and a prediction expression was derived through the analysis and the risk index was shown in 5 steps depending on predicted values obtained through the prediction expression derived. The risk index of 5 steps classified like this is considered to be used as important data for crime prevention activities.