• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.32 no.3
• /
• pp.58-76
• /
• 2019

Objectives : This study was designed to examine the effects of Daecheonglyong-tang(DCL) on atopic dermatitis induced by DNCB in mice Methods : The Nc/Nga mice were divided into 5 groups, and four groups excluding the normal group were applied by 2,4-dinitrochlorobenzene(DNCB), to cause AD and were orally administered with distilled water(negative control), dexamethasone(positive control), and DCL 200 or 400mg/kg once a day for 4 weeks respectively. The visual changes on skin, changes in skin tissue thickness and eosinophil infiltration were observed. IgE, Histamine, Cytokines, immune cells and the amount of gene expression of filaggrin, VEGF, $TGF-{\beta}1$, EGF were measured. Results : Dermatitis score showed a gross improvement on all DCL groups, similar to or better than positive control. All DCL groups showed no significant change in the basophils, while neutrophils and eosinophils decreased. In only DCL 400 mg/kg groups, white blood cells and mononuclear cells were decreased and lymphocytes were increased. In particular, neutrophils had similar or better effects than the positive control. In all DCL groups, IgE, Histamine, $IL-1{\beta}$, IL-4, IL-5, IL-6 and $TNF-{\alpha}$ were decreased and IL-2 was increased. In only DCL 400 mg/kg groups, IL-10 decreased and $IFN-{\gamma}$ increased. In particular, $IL-1{\beta}$ and $IFN-{\gamma}$ showed a similar rate of increase and decrease comparing positive control in DCL 400 mg/kg. $TGF-{\beta}$1 was increased in all DCL groups, filaggrin and VEGF were increased in only DCL 400 mg/kg groups. EGF did not make any changes. Epidermis, dermis thickness and eosinophil infiltration were also decreased in all DCL groups. Conclusions : By increasing Th1 cytokine and decreasing Th2 cytokine, DCL extracts appear to be effective in controlling immune response imbalances, anti-inflammatory and skin regeneration and are likely to be available as a treatment for AD.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.3
• /
• pp.1-11
• /
• 2015

This research was conducted to compare the effect of soil amendment and loess on physial and chemical properties of dredged soil and primary height growth of Ulmus davidiana var. japonica. Three types of research plots: control plot (Dredged soil only), DC treatment plot (Dredged soil + soil amendment) and DCL treatment plot (Dredged soil + soil amendment + Loess) were set at Okgu research site in Saemanguem. 32 trees of U. davidiana var. japonica were planted in each plots after 14 months from the construction. Soil texture, pH, electrical conductivity (EC), organic matter (OM), total nitrogen (TN), available P, exchangeable cation ($K^+$, $Na^+$, $Mg^{2+}$, $Ca^{2+}$) and sodium chloride were measured after 3 years from the construction. Also, survival rate and height of U. davidiana var. japonica were measured 22 months after planting, and the correlation between height of trees and the physico-chemical properties of soil were analyzed. Even though pH in both DC and DCL treatment plots are lower than control plot, they are still alkaline (> pH 8). OM, TN and available P in both DC and DCL treatment were higher than the control. Particularly, the content of available P in both DC and DCL treatment plots are 1.4~5.1 times and 2.0~3.1 times higher than the control respectively. The concentration of exchangeable Mg in DCL treatment plot was 1.1~5.5 times higher than the control (p < .05). The survival rate of the species was the highest in DCL treatment plot (98%) followed by DC treatment plot and the control. The average height of the trees in both DC and DCL treatment plots is 1.1m while the control is 0.8m. OM, TN, available P, K+ were significantly related to the height of U. davidiana var. japonica(p < .01). The results indicate that soil amendment affects on soil physial and chemical properties of dredged soil and height growth of U. davidiana var. japonica.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.127-132
• /
• 2009

This report examines the economic feasibility of a commercial 50,000 barrel per day direct coal liquefaction(DCL) facility to produce commercial-grade diesel and naphtha liquids from medium-sulfur bituminous coal. The scope of the study includes capital and operating cost estimates, sensitivity analysis and a comparative financial analysis. Based on plant capacity of 50,000BPD, employing Illinois #6 bituminous coal as feed coal the total capital cost appeared $3,994,858,000. Also, the internal rate of return of DCL appeared 6.60% on the base condition. In this case, coal price and sale price of products were the most influence factors. And DCL's payback period demanded a long time(12.3 years), because of high coal price at the present time. According to sensitivity analyses, the important factors on DCL processes were product sale price, feed coal price and the capital cost in order.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.1
• /
• pp.77-85
• /
• 2022

Retinaldehyde (RA), vitamin A derivative, is an intermediate between retinol and retinoic acid and has an excellent wrinkle improving effect. In this study, Drug-in-cyclodextrin-in-liposome (DCL) was used to enhance the stability and skin penetration of RA. The complex of RA and hydroxypropyl-beta-cyclodextrin (HP-β-CD) was prepared by the freeze-drying method, and the presence or absence of inclusion of retinal was confirmed by UV-Vis spectrometer, FT-IR and SEM images. RA was captured in HP-β-CD about 95.6% on 1 : 15 (w/w). The retinal-HP-β-CD complex was encapsulated in liposomes using a homomixer and microfluidizer, with an average particle size of 215 ± 4.2 nm and a zeta potential of -31.2 ± 0.5 mv. In the evaluation of the degradation stability of RA, degradation rate of RA-HP-β-CD-liposomes in water was 1.8% higher than RA-liposome (5.8%), RA-HP-β-CD complex (9.7%) and RA alone (37.6%). RA cream (0.05% RA) including RA-HP-β-CD-liposomes was prepared for clinical test with wrinkle-improving efficacy and skin dermis denseness evaluated for 2 or 4 weeks. RA cream showed a significant wrinkle improving effect without skin irritation. In conclusion, it was confirmed that the double stabilization technology using the DCL system contribu tes to the effect of improving skin wrinkles by increasing the stabilization of retinal.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.1
• /
• pp.86-91
• /
• 2001

The anticarcinogenic effects of various food components on human cancer cells have received much attention in recent years. The precise effect and mechanisms of anticarcinogens in food materials on cancer cells have rarely been investigated. This study was carried out to determine the effects of Daucus carota L. leaf (DCL) extracts on cytotoxic and chemopreventive effect on human cancer cells. The experiment was conducted to determine cytotoxicity of Daucus carota L. leaf extracts on HepG2, Hela and MCF-7 cells by MTT assay. Among various partition layers of Daucus carota L. leaf, the ethylacetate partition layer (DCLMEA) at 500 $\mu\textrm{g}$/mL was shown to be most effective on MCF-7 cell lines. The four partition layers which are DCLM, DCLMH, DCLMB and DCLMH were less effecitve in inducing cytotoxicity than DCLMEA was. We also determined the induction of intracellular quinone reductase (QR) activity by adding DCL extracts on HepG2 cells. Among various partition layers of DCL extracts, DCLMH and DCLM were tested to be most effective with results such as 4.9 and 4.73 with a control value of 1.0.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.6
• /
• pp.315-321
• /
• 2015

Rare-earth zirconates, such as $La_2Zr_2O_7$ and $Gd_2Zr_2O_7$, have been investigated as one of the candidates for replacing conventional yttria-stabilized zirconia (YSZ) for thermal barrier coating (TBC) applications at higher turbine inlet temperatures. In this study, double-ceramic-layer (DCL) TBCs of YSZ 1st layer and $La_2Zr_2O_7$ top coat layer are fabricated by suspension plasma spray with serial liquid feeders. Microstructures, hardness profiles, and thermal durability of DCL-TBCs are also characterized. Fabricated DCL-TBCs of YSZ/$La_2Zr_2O_7$ exhibit excellent properties, such as adhesion strength (>25 MPa) and electrical thermal fatigue (~1429 cycles), which are comparable with TBCs fabricated by atmospheric plasma spray.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.1
• /
• pp.1-8
• /
• 2018

ACL and DCL are have been conventionally used for reducing harmonic current on the input side of an ACMD. The current distortion ratio ITHD using ACL and DCL is only 35% to 85%, therefore to satisfy the IEEE Std. 519 requirements, the line filters has been focused as an alternative means. Those are installed between the AC power supply and the input of the ACMD, and must meet the IEEE Std. 519, be economical and be compact. To contribute to the widespread of using these line filters, we discussed concerning its topologies, simulation results, prototype test results as well as the cost evaluations. It included not only the proposed (NHHF) new hybrid harmonic filters which have both merits of simplicity and economic but also the past (BBHF) broadband harmonic filters and (HHF) hybrid harmonic filters.

• Journal of Life Science
• /
• v.14 no.5
• /
• pp.741-746
• /
• 2004

This study investigated the response of GLUT-4 and GRP-78 protein expression in soleus muscle of Streptozotocin-induced diabetic rats with caffeine oral administration by imposing different exercise intensities. Rats were randomly divided into 5 groups (n=6 in each group): diabetic group (D), diabetic-caffeine group (DC), diabetic-caffeine group with low intensity exercise (DCL), diabetic-caffeine group with moderate intensity exercise (DCM) and diabetic-caffeine group with high intensity exercise (DCH). The rats in DCL, DCM and DCH groups were exercised acutely by treadmill running for 8 meter/m, 16 meter/m and 25 meter/m, respectively. Little difference in GLUT-4 protein expression was shown in DC and DCL compared to D. GLUT-4 protein expression was decreased in DCM and increased in DCH was observed. GRP-78 protein expressions in DCL, DCM and DCH were little lower than that of D. An increase in GRP-78 protein was observed in DC. Improved insulin sensitivity with acute high intensity exercise gives the rats important therapy that lowers insulin requirement. This improvement of insulin sensitivity for glucose transport in skeletal muscle results from translocation of the GLUT-4 protein from the endoplasmic reticilum to the cell surface and increase in total quantity of GLUT-4 protein. It is not clear what mechanism reduced GRP-78 protein level in exercise group. It is merely conjectured that caffeine-induced lipolysis provided cells with energy in abundance and this relieved stress which cells are subjected to receive when performing exercise.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.89-99
• /
• 1999

The automatic design of shell & tube type oil cooler can be used in real industrial environments. Since the automatic design system is intended to be used in small companies, it is designed to be operated well under environments of CAD package in the personal computer. It has adopted GUI in design system, and has employed DCl language. Design parameters to be considered in the design stage of shell and tube type oil cooler are type of oil cooler, outer diameter, thickness, length of tube, tube arrangement, tube pitch, flow rate, inlet and outlet temperature, physical properties, premissive pressure loss on both sides, type of baffle plate, baffle plate cutting ratio, clearance between baffle plate outer diameter and shell inner diameter and clearance between baffle plate holes. As a result, the automatic design system of shell & tube type oil cooler is constructed by the environment of CAD software using LISP. We have built database of design data for various kinds of shell & tube type oil coolers. The automatic design system have been assessed and compared with existing specification of design. Good agreement with Handbook of heat exchanger and design dta of real industrial environments has been found.

• Journal of Power System Engineering
• /
• v.1 no.1
• /
• pp.154-161
• /
• 1997

Because of the complexity of the flower design of roll forming process, in which the flat strip is progressively deformed by successive sets of profiled rolls, a computer-aided design system for the flower design has been developed. It is programmed in AutoLISP and DCL(Dialogue Control Language) of AutoCAD. It has been found that the system is helpful in saving the time and effort required to design the flower of the product to be roll-formed.