• 대한의용생체공학회:의공학회지
• /
• 제17권4호
• /
• pp.491-498
• /
• 1996

The development of a compact two-wavelength Nd:YAG laser for dental and ENT applications is presented. The Nd:YAG resonator generates either 1.06$\mu$m or 1.32$\mu$m. The wavelength selection is made at the control panel. The Nd:YAG laser parameters at 1.06$\mu$m are ; the maximum pulse duration of 150$\mu$s, repetition rates of I-100Hz, and the maximum average power of 25W. At 1.32$\mu$m, the pulse duration is the same where the repetition rates and the maximum average power are I-30Hz and lOW respectively. High voltage power supply consists of a simmer module and two identical high voltage DC converters. In order to make a complete medical laser system, an optical fiber delivery unit, foot pedal and water spray handpiece are also developed. The wavelength selection is reliable since no movement of optical or mechanical components is required. The high voltage power supply is compact, easy to be maintained and applicable for other laser systems due to its modular design.

• 한국인터넷방송통신학회논문지
• /
• 제21권4호
• /
• pp.123-127
• /
• 2021

밀리미터파 추적 레이더는 다양한 환경조건에서 운용 가능해야하므로 기존의 추적 레이더에 비해 동등 이상의 연산능력 및 소형화를 요구한다. 본 논문에서는 밀리미터파 추적 레이더에 적용하기 위한 소형 전원공급기 설계 및 구현방안에 대해 기술한다. FPGA/DSP 등 디지털회로의 저전압/고전류 및 전압 정밀도 요구사항 충족을 위해 Point of Load (POL) 컨버터를 적용하였으며, 전력밀도를 향상시키고 시스템 효율을 개선할 수 있다. 부하가 크지 않은 출력전압에는 LDO (Low Dropout) 등을 적용하여 최대 출력 375 W, 출력 전원 8종의 단일 입력-다중 출력 전원공급기를 개발하였다. 최대 부하 조건에서 전압정밀도 <±2 %, 잡음레벨 <50 mVpp 특성을 확인하였다.

• 전력전자학회논문지
• /
• 제4권2호
• /
• pp.175-183
• /
• 1999

PWM 컨버터에서 직류출력전압의 빠른 응답을 위해 입력 및 출력의 전력평형개념을 시스템 모델링에 도입하는 것이 바람직하다. 이 경우 시스템은 비선형이 되며 제어기 설계가 용이하지 않다. 본 논문에서는 입출력 궤환선형화 기법을 응용하여 시스템의 비선형성을 제거하였으며 그 결과 빠른 전압응답특성을 얻을 수 있었다. 또한 작은 용량의 전해커패시터를 사용하더라도 부하변동에 대해 직류출력전압을 일정하게 유지하는 것이 가능함을 보였다.

• 조명전기설비학회논문지
• /
• 제14권3호
• /
• pp.81-87
• /
• 2000

전력변환기와 같은 비선형 부하의 사용증가는 전원 전력설비시스템에 고조파을 발생시킨다. AD/DC 변환설비는 전력시스템에서 중요한 고조파 발생원이 되고 있다. 고조파를 포함하는 전류와 전압은 전기설비에 고장과 오동작등과 같은 나쁜 영향을 미친다. 고조파 문제를 해결하는 일반적인 방법으로는 고조파 필터룹 사용한다. 본 논문에서는 EDSA 고조파 분석 프로그램을 사용하여 고조파를 제거하는 동조필터를 설치하여 그 효고를 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.395-397
• /
• 1999

This paper presents a method of improving the power factor and the waveform of A.C line currents and the out waveforms of AC to DC fully bridge converter systems which is achieved by connecting converters in series and parallel. The results of simulation show that the power factor and the source voltage and current waveforms are improved by the method of connecting converter in series, and the controlled input voltage and current waveform using a current limit controller.

• 수산해양기술연구
• /
• 제28권3호
• /
• pp.274-285
• /
• 1992

Among various Power converters, a variable voltage variable frequency (VVVF) three-phase PWM inverter is regarded as most promising power converter due to its capabilities, which permits the control of voltage, frequency and harmonic contents in a single power stage employing only on DC source. As a modulating technique of the PWM inverter, the regular sampling technique has rendered possible the on-line computation and generation of PWM control waveforms with a reasonably high switching frequencies. In this paper, microprocessor based three-phase regular samping PWM inverter with real-time control algorithm and control circuits for driving three phase AC motor has been developed. Harmocic components of PWM waveform were analized theoretically in terms of Bessel function series and then calculated by digital computer and observed with spectrum analyzer.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권1호
• /
• pp.29-36
• /
• 2006

The interest for harmonic problems has been increasing due to the increment of nonlinear loads. The loads such as DC power system, personal computers, UPS system, inverters and converters operate as harmonic current sources. In this paper, a new type of the passive filter, Hybrid Harmonic Filter (HHF) is suggested to mitigate harmonic problems in power systems. The HHF is developed for reducing harmonic current, especially on the system that includes 6-pulse bridge rectifiers. Also, it is expected to prevent the overheating of transformers and feeders due to overcurrent and to correct the power factor.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.212-213
• /
• 2017

In this paper is presented a pre-charging sequence for single-phase cascaded neutal-point-clamped(NPC) converters for capacitors voltage balancing. capacitor imbalance problem in pre-charge sequence is caused in cascaded NPC converter by its topology. the DC link voltage at each NPC converter module can be balanced by the proposed switching method. the design and performance of the proposed sequence are verified by simulation and experimental results using prototype.

• 전력전자학회논문지
• /
• 제1권1호
• /
• pp.38-46
• /
• 1996

The commutation operation of the current source converter for switched reluctance motor drives is analyzed in this paper. The commutation operation in the current source converter consists of two modes. At turn-off of phase switch, the phase current decreases sinusoidally, and the sum of two phase currents during commutation period is constant. At this time, the capacitor voltage increases quickly with changing polarity and decreases slowly when another phase switches turn on or off. Frequency of step-down DC chopper in the current source converter is low because of the dump such as BJTs and GTOs are possible as phase switches instead of Power MOSFET and IGBTS. They may result in reductions of conduction losses and manufacturing cost in the current source converter comparing to the voltage source converter of SRM.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.388-395
• /
• 2010

An active boost converter for a single phase SRM using series-parallel connected capacitors is proposed in this paper. The proposed active boost converter has two diodes and one power switch with an anti-parallel diode and one additional boost capacitor. The additional boost capacitor could be series or parallel connected to the dc-link capacitor to produce proper excitation and demagnetization voltage. The proposed active boost converter can easily achieve a fast excitation and demagnetization from the capacitor connection. In this paper, series and parallel connected converters are reviewed, and the detailed operating modes as well as the voltage characteristics of the proposed converter are analyzed. The simulation and experimental results shows the effectiveness of the proposed active boost converter.