• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.189-192
• /
• 1998

In this paper, we analyzed Microwave-DC conversion efficiency for the rectennas and it's position change. Rectenna consist of a two major parts, receiveing antenna and rectifying circuits. We made two types of 2.45C rectennas which the dipole and the patch antenna. Rectifying circuit is a GaAs-schottky diode with a large forward current and reverse breakdown voltage. The results of RF-DC conversion efficiency for two rectennas, patch type has 75.6% efficiency with 400$\Omega$ load resistor and dipole type has 69.75% efficiency with 360$\Omega$ load resistor. When the rectennas has optimal load resistor, Rectenna efficiency shows of $\pm10%$ at $70^{\circ}$~$110^{\circ}$ position.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.1
• /
• pp.93-102
• /
• 1994

This paper, presents SECRET(SEC REliability Tool), which predicts reliability problems related to the hot-carrier and electromigration effects on the submicron MOSFETs and interconnections. To simulate DC and AC lifetime for hot-carrier damaged devices, we have developed an accurate substrate current model with the geometric sensitivity, which has been verified over the wide ranges of transistor geometries. A guideline can be provided to design hot-carrier resistant circuits by the analysis of HOREL(HOT-carrier RFsistant Logic) effect, and circuit degradation with respect to physical parameter degradation such as the threshold voltage and the mobility can also be expected. In SECRET, DC and AC MTTF values of metal lines are calculated based on lossy transmission line analysis, and parasitic resistances, inductances and capacitances of metal lines are accurately considered when they operate in the condition of high speed. Also, circuit-level reliability simulation can be applied to the determination of metal line width and-that of optimal capacitor size in substrate bias generation circuit. Experimental results obtained from the several real circuits show that SECERT is very useful to estimate and analyze reliability problems.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.48-55
• /
• 2017

This paper proposes a new link structure that transmits power, clock, and data through a single optical fiber for a future automotive network. A pulse-position modulation (PPM) technique is adopted to guarantee a DC-balanced signal for robust power transmission regardless of transmitted data pattern. Further, circuit implementations and theoretical analyses for the proposed PPM transceiver are described in this paper. A prototype transceiver fabricated in 65-nm CMOS technology, is used to verify the PPM signaling part of the proposed system. The prototype achieves a $10^{-13}$ bit-error rate and 0.188-UI high frequency jitter tolerance while consuming 14 mW at 800 Mb/s.

• Journal of the Microelectronics and Packaging Society
• /
• v.8 no.2
• /
• pp.15-18
• /
• 2001

The Mo/si multilayer for EUV lithography was deposited using magnetron sputtering system. The multilayers were characterized using the cross-sectional transmission electron microscope (TEM) and low/high angle X-ray diffraction (XRD). The microstructure of Mo and Si was highly textured structure and amorphous, respectively. The well-defined low angle XRD peaks implies a well-defined multilayer structure. The interfacial layer of Mo-on-Si was thicker than Si-on-Mo interfacial layer.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.217-218
• /
• 2015

This paper presents an anaysis of parallel operated HVDC and AC transmissions' transient stability and control analysis by using PACAD/EMTDC program. We measured and analyzed power trasfer in case of various operating conditions including ac, dc faults to find an effects to the power system of the operating conditions. In this project, Simulation of ac/dc parallel system that maximize margins of the ac system and allow a higher power transfer is performed and analyzed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1991.04a
• /
• pp.158-165
• /
• 1991

DC servo motors have small torques compared to their weight. In order to reduce the speed and increase the output torque of the DC motor, a gear box is commonly used. The use of a gearbox, however, imposes limitations onmany applications because of the backlash and the reduction in transmission efficiency. Furthemore, the elastic deformation or the compliance of the gearbox decreases the accuracy of the servo mechanism and the stability of the system. In view of the many disadvantages in using the gearbox, a more effective solution has to be found. The solution is the direct drive mechanism. There are many kinds of direct drive motors. I will consider the ultrasonic motor in particular.

• Journal of Digital Contents Society
• /
• v.6 no.2
• /
• pp.113-118
• /
• 2005

In this paper, the reconstruction scheme of lost block in the transmission of block coded image is proposed. Due to differential coding of dc coefficient in JPEG images when JPEG image are transmitted over wireless communications, the effect of errors can destroy entire blocks of the image. Therefore, we aim to reconstruct the lost information using correlation between the lost block and its neighbor blocks. In order to evaluate the performance of this scheme, we inserted some intentional block error into the test images. And we obtained good results objectively and subjectively by experiments.

• Journal of electromagnetic engineering and science
• /
• v.13 no.4
• /
• pp.245-250
• /
• 2013

This paper presents a tunable bandpass filter based on the varactor-loaded composite right- and left-handed transmission line (CRLH-TL). The proposed filter is composed of one CRLH-TL unit cell, which corresponds to the third-order bandpass filter. The tunable bandpass filter is designed using only lumped-elements. The use of lumped elements saves space and lowers the fabrication cost. The size of the proposed tunable bandpass filter is $17mm{\times}5mm$, neglecting the feed lines and DC lines. All of the varactors are controlled by one DC bias. The center frequency of the bandpass filter can be controlled by varying the value of the varactors. The tunable range of the center frequency is from 412.5 to 670 MHz. The insertion loss is less than 3 dB, the return loss is more than 10 dB in the passband.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.288-292
• /
• 2002

We propose the new type of on-chip ESD protection method for RF applications. By using the properties of RF circuits, we can use the short-circuited stub as ESD protection device in front of the DC blocking capacitor Specially, we can use short-circuited stub as the portion of the matching circuit so to reduce the and various parameters of the transmission line. This new type ESD protection method is very different from the conventional ESD protection method. With the new type ESD protection method, we remove the parasitic capacitance of ESD protection device which degrade the performance of core circuit.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2177-2179
• /
• 2000

We designed and manufactured micros trip patch antenna mainly used in the Rectenna and then analysed RF-DC conversion efficiency of wireless power transmission system. We analyse conversion efficiency of load, direction of linear and dual polization rectenna. We found that the maximum efficiency would be about 70% of load and direction in patch type. In conclusion, we found that total conversion efficiency is 64%$\sim$71% in patch Rectenna.